2018
Fri, 04/03/2020 - 20:24 — VITSchool Name:
Sl No | Title of paper | Name of the author/s | Name of journal | Indexed InScopus / WOS/Pub Med / ICI / Non Scopus | ISSN number | |
1 | CFD study and experimental investigation of piston geometry induced in-cylinder charge motion on LPG fuelled lean burn spark ignition engine | Ravi K., Pradeep Bhasker J., Alexander J., Porpatham E. | Fuel | WOS | 162361 | |
2 | Molten salt reactors and their development over the years - a review | Saraf N., Devarajan A., Mokashi S.S., Rao G., Dalal V., Premkartikkumar S.R. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22498001 | |
3 | Effects of water diesel emulsion on dieselengine | Datta Sai K., Gopidesi R.K., Premkartikkumar S.R., Nagarjuna K. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22498001 | |
4 | Numerical investigations on a biogas powered homogeneous charge compression ignition engine | Adhavan K., Sathishkumar S., Mohamed Ibrahim M. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
5 | Influence of sintering temperature on mechanical properties of spark plasma sintered prealloyed Ti-6Al-4 v powder | Muthuchamy A., Patel P., Rajadurai M., Chaurisiya J.K., Annamalai A.R. | Materialpruefung/Materials Testing | WOS | 2195-8572 | |
6 | Effect of Sn addition on the microstructural characteristics and mechanical properties of the titanium alloy (Ti6Al4V) | Rajadurai M., Annamalai A.R. | Kovove Materialy | WOS | 0023432X | |
7 | Microstructural Evolution of Iron Based Alloys Produced by Spark Plasma Sintering Method | Muthuchamy A., Annamalai A.R., Karthikeyan M., Thakur A., Nagaraju N., Agrawal D.K. | Physics of Metals and Metallography | WOS | 0031918X | |
8 | Machinability study of developed composite AA6061-ZrO2 and analysis of influence of MQL | James S.J., Annamalai A.R. | Metals | WOS | 2075-4701 | |
9 | Recent developments in investigation on buckling and post buckling responses of laminated composite shells | Praveen A P., Rajamohan V., Mathew A.T. | Polymer Composites | WOS | 2728397 | |
10 | Assessment of drilling-induced damage in CFRP under chilled air environment | Abish J., Samal P., Narenther M.S., Kannan C., Balan A.S.S. | Materials and Manufacturing Processes | WOS | 1532-2475 | |
11 | Effect of La |
Muthuchamy, A., Nagaraju, N., Agrawal, D.K., Annamalai, A.R. | Ceramics International | WOS | 0272-8842 | |
12 | Structural optimization of tapered composite sandwich plates partially treated with magnetorheological elastomers | Vemuluri R.B., Rajamohan V., Sudhagar P.E. | Composite Structures | WOS | 2638223 | |
13 | Optimal pricing and inventory decisions in a centralised and de-centralised two-echelon inventory system under nonlinear price dependent demand | Nagaraju D., Kumar K.K., Narayanan S. | International Journal of Logistics Systems and Management | Scopus | 17427967 | |
14 | Integration of lean, Six Sigma and theory of constraints for productivity improvement of mining industry | Rajini J., Nagaraju D., Narayanan S. | International Journal of Productivity and Quality Management | Scopus | 17466474 | |
15 | Biochemical responses from biomass of isolated Chlorella sp., under different cultivation modes: Non-linear modelling of growth kinetics | Praveen K., Abinandan S., Natarajan R., Kavitha M.S. | Brazilian Journal of Chemical Engineering | WOS | 1046632 | |
16 | Performance investigation of Kalina cooling cogeneration cycles | Shankar R., Srinivas T. | International Journal of Refrigeration | WOS | 0140-7007 | |
17 | A human whole blood chemically modified electrode for the hydrogen peroxide reduction and sensing: Real-time interaction studies of hemoglobin in the red blood cell with hydrogen peroxide | Amreen K., Kumar A.S. | Journal of Electroanalytical Chemistry | WOS | 15726657 | |
18 | In-situ electrochemical immobilization of [Mn(bpy)2(H2O)2]2+ complex on MWCNT modified electrode and its electrocatalytic H2O2 oxidation and reduction reactions: A Mn-Pseudocatalase enzyme bio-mimicking electron-transfer functional model | Saravanan N., Mayuri P., Huang S.-T., Kumar A.S. | Journal of Electroanalytical Chemistry | WOS | 15726657 | |
19 | Bio-electrocatalytic reduction of dissolved oxygen by whole blood chemically modified electrode and its application | Amreen K., Kumar A.S. | Journal of Electroanalytical Chemistry | WOS | 15726657 | |
20 | Novel cooling augmented cogeneration cycle [Nouveau cycle de cogénération à refroidissement augmenté] | Sharkar R., Srinivas T. | International Journal of Refrigeration | WOS | 0140-7007 | |
21 | A blood-serum sulfide selective electrochemical sensor based on a 9,10-phenanthrenequinone-tethered graphene oxide modified electrode | Shalini Devi K.S., Senthil Kumar A. | Analyst | WOS | 32654 | |
22 | A bipotentiostat based separation-free method for simultaneous flow injection analysis of chromium (III) and (VI) species | Nellaiappan S., Kumar A.S. | Electrochimica Acta | WOS | 134686 | |
23 | A new organic redox species-indole tetraone trapped MWCNT modified electrode prepared by in-situ electrochemical oxidation of indole for a bifunctional electrocatalysis and simultaneous flow injection electroanalysis of hydrazine and hydrogen peroxide | Mayuri P., Huang S.-T., Mani V., Kumar A.S. | Electrochimica Acta | WOS | 134686 | |
24 | Selective amperometric and flow injection analysis of 1,2-dihydroxy benzene isomer in presence of 1,3- and 1,4-dihydroxy benzene isomers using palladium nanoparticles-chitosan modified ITO electrode | Nellaiappan S., Kumar A.S. | Sensors and Actuators, B: Chemical | WOS | 0925-4005 | |
25 | Selective electrochemical polymerization of 1-napthylamine on carbon electrodes and its pH sensing behavior in non-invasive body fluids useful in clinical applications | Vishnu N., Kumar A.S., Pan G.-T., Yang T.C.-K. | Sensors and Actuators, B: Chemical | WOS | 0925-4005 | |
26 | Detoxification of dyes by aspergillus Niger isolated from dye contaminated soil effluent from the sites of textile industry | Ranjitha J., Shalini P., Anand M., Raghavendra S.G. | Research Journal of Chemistry and Environment | Scopus | 9720626 | |
27 | Investigation of Solar Cooling Cogeneration Plant | Shankar R., Srinivas T., Reddy B.V. | Applied Solar Energy (English translation of Geliotekhnika) | Scopus | 0003701X | |
28 | Effect of Inlet Air Humidity on Performance of Solar Hybrid Combined Cycle Power Plant | Samuel V., Srinivas T., Reddy B.V. | Applied Solar Energy (English translation of Geliotekhnika) | Scopus | 0003701X | |
29 | Biodiesel production from waste animal fat using a novel catalyst HCA immobilized AuNPS amine grafted SBA-15 | Srinivasan G.R., Palani S., Jambulingam R. | Journal of Engineering Science and Technology | Scopus | 18234690 | |
30 | A review on performance, emission and combustion characteristics of a diesel engine fuelled with various vegetable oil | Asokan M.A., Vijayan R., Senthur Prabu S. | Indian Journal of Chemical Technology | WOS | 0975-0991 | |
31 | Effect of TiC Addition and Heating Mode on the Electrochemical Response of Powder Metallurgy Processed Corrosion-Resistant Austenitic and Ferritic Steels | Muthuchamy A., Raja Annamalai A. | Metal Science and Heat Treatment | WOS | 1573-8973 | |
32 | Experimental investigation of mixed convection and surface radiation heat transfer from protruding discrete heat sources mounted on a vertical channel | Hotta T.K., Harsha P.S., Venkateshan S.P. | Heat Transfer Research | WOS | 2162-6561 | |
33 | Optimization of cryo-treated EDM variables using TOPSIS-based TLBO algorithm | Mohanty C.P., Satpathy M.P., Mahapatra S.S., Singh M.R. | Sadhana - Academy Proceedings in Engineering Sciences | WOS | 0973-7677 | |
34 | Thermal Stability of Cathodic Arc Vapour Deposited TiAlN/AlCrN and AlCrN/TiAlN Coatings on Tungsten Carbide Tool | Sampath Kumar T., Balasivanandha Prabu S., Madhavan S., Padmanabhan K.A. | Transactions of the Indian Institute of Metals | WOS | 0972-2815 | |
35 | Multi Response Optimization and Experimental Investigations into the Impact of Wire EDM on the Tribological Properties of Ti–6Al–4V | Kuriachen B., Lijesh K.P., Kuppan P. | Transactions of the Indian Institute of Metals | WOS | 0972-2815 | |
36 | Investigation of metallurgical and mechanical properties of 21st century nickel-based superalloy 686 by electron beam welding technique | Arulmurugan B., Agilan M., Jerome S., Arivarasu M., Manikandan M., Srikanth A., Arivazhagan N. | Sadhana - Academy Proceedings in Engineering Sciences | WOS | 0973-7677 | |
37 | Surface modification technique to enhance metallurgical and mechanical properties of alloy C-276 weldment by laser shock peening without coating | Nithin Joseph Reddy S.A., Thrinadh E., Prabhakaran S., Kalainathan S., Arivazhagan N., Manikandan M. | Sadhana - Academy Proceedings in Engineering Sciences | WOS | 0973-7677 | |
38 | Role of working fluids on the cooling of discrete heated modules: a numerical approach | Patil N.G., Hotta T.K. | Sadhana - Academy Proceedings in Engineering Sciences | WOS | 0973-7677 | |
39 | Microstructural and electrochemical behaviour of aluminium alloy composites produced using different sintering techniques | Muthuchamy A., Annamalai A.R., Acharyya S.G., Nagaraju N., Agrawal D.K. | Materials Research | WOS | 15161439 | |
40 | Characterization of TiCN coating synthesized by the plasma enhanced physical vapour deposition process on a cemented carbide tool | Kumar T.S., Jebaraj A.V., Sivakumar K., Shankar E., Tamiloli N. | Surface Review and Letters | WOS | 0218625X | |
41 | ENHANCEMENT of EXFOLIATION CORROSION RESISTANCE of ALUMINIUM ALLOY 5083 by SHOT PEENING | Jebaraj A.V., Ajaykumar L., Deepak C.R., Aditya K.V.V. | Surface Review and Letters | WOS | 0218625X | |
42 | Tribological behaviour and wear fashion of processed AA6061/ZrO2 composite | James J., Raja Annamalai A. | Industrial Lubrication and Tribology | WOS | 368792 | |
43 | Effect of particle size distribution on rheology of high concentration limestone–water slurry for economic pipeline transportation | Senapati S., Pothal J.K., Mohanty A. | Particulate Science and Technology | WOS | 0272-6351 | |
44 | Studies on testing and modelling of formability in aluminium alloy sheet forming | Subramani K., Alagarsamy S.K., Chinnaiyan P., Chinnaiyan S.N. | Transactions of Famena | WOS | 13331124 | |
45 | Improvement of Metallurgical and Mechanical Properties of Gas Tungsten arc Weldments of Alloy 686 by Current Pulsing | Arulmurugan B., Manikandan M. | Transactions of the Indian Institute of Metals | WOS | 9722815 | |
46 | Investigation of Structure Property Relationship of the Dissimilar Weld Between Austenitic Stainless Steel 316L and Duplex Stainless Steel 2205 | Vinoth Jebaraj A., Sampath Kumar T., Manikandan M. | Transactions of the Indian Institute of Metals | WOS | 9722815 | |
47 | Application of EMD ANN and DNN for self-aligning bearing fault diagnosis | Narendiranath Babu T., Aravind A., Rakesh A., Jahzan M., Rama Prabha D. | Archives of Acoustics | WOS | 0137-5075 | |
48 | Characterization of microfiber isolated from Hibiscus sabdariffa var. altissima fiber by steam explosion | Karakoti A., Biswas S., Aseer J.R., Sindhu N., Sanjay M.R. | Journal of Natural Fibers | WOS | 15440478 | |
49 | Mesoscopic analysis of heatline and massline during double-diffusive MHD natural convection in an inclined cavity | Sathiyamoorthi A., Anbalagan S. | Chinese Journal of Physics | WOS | 5779073 | |
50 | Co-combustion analysis of lignite coal and groundnut shell using TGA | Sakthivel C., Gopal P., Rameshkumar C., Suresh Kumar B. | Journal of Applied Fluid Mechanics | WOS | 17353572 | |
51 | Dynamic characterization of the thickness-tapered laminated plant fiber-reinforced polymer composite plates | Suthenthiraveerappa V., Gopalan V., Arumugam A.B., Ramasamy B. | Advanced Composite Materials | WOS | 0924-3046 | |
52 | Analysis of structure property relationship of super duplex stainless steel AISI 2507 weldments for severe corrosive environments | Paranthaman V., Shanmuga Sundaram K., Jebaraj A.V. | Materials Research Express | WOS | 20531591 | |
53 | Characterization of microstructure and mechanical properties of nickel based superalloy 617 by pulsed current gas tungsten arc welding technique | Mageshkumar K., Kuppan P., Arivazhagan N. | Materials Research Express | WOS | 20531591 | |
54 | Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments | Kannan C., Ramanujam R. | Materials Research Express | WOS | 20531591 | |
55 | Drilling performances and wear characteristics of coated drill bits during drilling reinforced concrete | Sathish S., Ramkumar S., Geetha M. | International Journal of Applied Ceramic Technology | WOS | 1546542X | |
56 | Investigations on pool boiling critical heat flux, transient characteristics and bonding strength of heater wire with aqua based reduced graphene oxide nanofluids | Kamatchi R., Kumaresan G. | Chinese Journal of Chemical Engineering | WOS | 1004-9541 | |
57 | The role of perceived benefits and personality traits on mobile instant messaging users’ responses | Padmavathy, C., Lee, S., Pattusamy, M., Dey, M.K., Swapana, M. | Asia Pacific Journal of Marketing and Logistics | WOS | 1355-5855 | |
58 | Experimental investigations on nucleate boiling heat transfer of aqua based reduced graphene oxide nanofluids | Kamatchi R. | Heat and Mass Transfer/Waerme- und Stoffuebertragung | WOS | 0947-7411 | |
59 | Dynamic behaviour of woven bio fiber composite | Rajesh M., Sultan M.T.H., Uthayakumar M., Jayakrishna K., Shah A.U.M. | BioResources | WOS | 19302126 | |
60 | Influence of Exhaust Gas Recirculation on Combustion and Emission Characteristics of Diesel Engine Fuelled with 100% Waste Cooking Oil Methyl Ester | Nanthagopal K., Raj R.T.K., Ashok B., Elango T., Saravanan S.V. | Waste and Biomass Valorization | WOS | 1877-2641 | |
61 | Toward the design of interstitial nonmetals co-doping for Mg-based hydrides as hydrogen storage material | Wu Z., Zhu L., Yang F., Nyamsi S.N., Porpatham E., Zhang Z. | Journal of Materials Research | WOS | 8842914 | |
62 | Concentrated energy addition for active drag reduction in hypersonic flow regime | Ashwin Ganesh M., John B. | Acta Astronautica | WOS | 945765 | |
63 | Austenite reversion in 18% Ni maraging steel and its weldments | Rohit B., Muktinutalapati N.R. | Materials Science and Technology (United Kingdom) | WOS | 2670836 | |
64 | Experimental investigation on physical and mechanical properties of lime mortar: Effect of organic addition | Thirumalini S., Ravi R., Rajesh M. | Journal of Cultural Heritage | WOS | 1296-2074 | |
65 | Liquid – Liquid horizontal pipe flow – A review | Ahmed S.A., John B. | Journal of Petroleum Science and Engineering | WOS | 9204105 | |
66 | Thermoelastic Stability Behavior of Curvilinear Fiber-Reinforced Composite Laminates With Different Boundary Conditions | Manickam G., Bharath A., Das A.N., Chandra A., Barua P. | Polymer Composites | WOS | 2728397 | |
67 | Effect of heating mode on sinterability of YSZ+CeO2 ceramics | Raja Annamalai A., Nagaraju N., Agrawal D.K., Muthuchamy A. | Metals | WOS | 2075-4701 | |
68 | Nonlinear Free Flexural Vibration of Curvilinear Fibre Composite Laminates Using a Higher-Order Element | Ganapathi M., Venkatachari A., Haboussi M., Mathew A.T. | International Journal of Structural Stability and Dynamics | WOS | 2194554 | |
69 | Semi-active vibration control of an 8x8 armored wheeled platform | Trikande M.W., Karve N.K., Anand Raj R., Jagirdar V.V., Vasudevan R. | JVC/Journal of Vibration and Control | WOS | 10775463 | |
70 | Elastic stability of curved nanobeam based on higher-order shear deformation theory and nonlocal analysis by finite element approach | Polit O., Merzouki T., Ganapathi M. | Finite Elements in Analysis and Design | WOS | 0168-874X | |
71 | A DEMATEL approach for evaluating barriers for sustainable end-of-life practices | K S., R J., K.E.K V., Ravi P. | Journal of Manufacturing Technology Management | WOS | 1741038X | |
72 | Analysis of network design for a circular production system using multi-objective mixed integer linear programming model | Vimal K.E.K., Rajak S., Kandasamy J. | Journal of Manufacturing Technology Management | WOS | 1741038X | |
73 | Experimental study on effect of wick structures on thermal performance enhancement of cylindrical heat pipes | Kumaresan, G., Vijayakumar, P., Ravikumar, M., Kamatchi, R., Selvakumar, P. | Journal of Thermal Analysis and Calorimetry | WOS | 1388-6150 | |
74 | Investigation of TiAlN coated roller burnishing on Al-(B4C)p MMC workpiece material | Shankar E., Balasivanandha Prabu S., Kumar T.S., John M.R.S. | Materials and Manufacturing Processes | WOS | 1042-6914 | |
75 | Effect of ceramic reinforcements on microwave sintered metal matrix composites | Ashwath P., Xavior M.A. | Materials and Manufacturing Processes | WOS | 1042-6914 | |
76 | Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites | Prashantha Kumar H.G., Anthony Xavior M. | Materials and Manufacturing Processes | WOS | 1042-6914 | |
77 | Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments | Kannan C., Ramanujam R., Balan A.S.S. | Materials and Manufacturing Processes | WOS | 1042-6914 | |
78 | Ultrasonication and microwave processing of aluminum alloy- Graphene - Al2O3 nanocomposite | Kumar H.G.P., Xavior M.A., Ashwath P. | Materials and Manufacturing Processes | WOS | 1042-6914 | |
79 | Comparative evaluation of performances of TiAlN, AlCrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis | T. S.K., Ramanujam R., Vignesh M., Tamiloli N., Sharma N., Srivastava S., Patel A. | Sensors and Actuators, A: Physical | WOS | 0924-4247 | |
80 | A sensitivity study of diffusional mass transfer of gases in tropical storm hydrometeors | Ghosh S., Gumber S., Varotsos C. | Theoretical and Applied Climatology | WOS | 0177-798X | |
81 | Development of improved microstructural traits and mechanical integrity of stabilized stainless steel joints of AISI 321 | Devendranath Ramkumar K., Pavan B., Chandrasekar V. | Journal of Manufacturing Processes | WOS | 1526-6125 | |
82 | Investigations on the microstructure and mechanical properties of dissimilar welds of inconel 718 and sulphur rich martensitic stainless steel, AISI 416 | Dev S., Ramkumar K.D., Arivazhagan N., Rajendran R. | Journal of Manufacturing Processes | WOS | 1526-6125 | |
83 | Additive manufactured multi-material structure with directional specific mechanical properties based upon classical lamination theory | Sugavaneswaran M., Arumaikkannu G. | Rapid Prototyping Journal | WOS | 13552546 | |
84 | A nonlocal higher-order model including thickness stretching effect for bending and buckling of curved nanobeams | Ganapathi M., Polit O. | Applied Mathematical Modelling | WOS | 0307904X | |
85 | Drilling on fiber reinforced polymer/nanopolymer composite laminates: A review | Panchagnula K.K., Palaniyandi K. | Journal of Materials Research and Technology | WOS | 22387854 | |
86 | Improvement in the mechanical properties of neat GFRPs with multi-walled CNTs | Panchagnula K.K., Kuppan P. | Journal of Materials Research and Technology | WOS | 22387854 | |
87 | An effective hybrid multi objective evolutionary algorithm for solving real time event in flexible job shop scheduling problem | Sreekara Reddy M.B.S., Ratnam C., Rajyalakshmi G., Manupati V.K. | Measurement: Journal of the International Measurement Confederation | WOS | 0263-2241 | |
88 | Liquid - Liquid horizontal pipe flow - A review | Ahmed S.A., John B. | Journal of Petroleum Science and Engineering | WOS | 9204105 | |
89 | Natural convection heat transfer and fluid flow analysis in a 2D square enclosure with sinusoidal wave and different convection mechanism | Pichandi P., Anbalagan S. | International Journal of Numerical Methods for Heat and Fluid Flow | WOS | 9615539 | |
90 | High-temperature corrosion behaviour of air plasma sprayed Cr3C2-25NiCr and NiCrMoNb powder coating on alloy 80A at 900 °C | Sreenivasulu V., Manikandan M. | Surface and Coatings Technology | WOS | 1879-3347 | |
91 | Investigations on performance characteristics of GFRP composites in milling | Prasanth I.S.N.V.R., Ravishankar D.V., Hussain M.M., Badiganti C.M., Sharma V.K., Pathak S. | International Journal of Advanced Manufacturing Technology | WOS | 2683768 | |
92 | Experimental investigation of IN725 under different cooling environments using new tool holder | Gupta S., Venkatesan K., Devendiran S., Mathew A.T. | Materials and Manufacturing Processes | WOS | 10426914 | |
93 | Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel | Bragadeshwaran A., Kasianantham N., Balusamy S., Muniappan S., Reddy D.M.S., Subhash R.V., Pravin N.A., Subbarao R. | Environmental Science and Pollution Research | WOS | 9441344 | |
94 | Experimental study of methyl tert-butyl ether as an oxygenated additive in diesel and Calophyllum inophyllum methyl ester blended fuel in CI engine | Bragadeshwaran A., Kasianantham N., Ballusamy S., Tarun K.R., Dharmaraj A.P., Kaisan M.U. | Environmental Science and Pollution Research | WOS | 9441344 | |
95 | Development of welding technique to suppress the microsegregation in the aerospace grade alloy 80A by conventional current pulsing technique | Subramani P., Manikandan M. | Journal of Manufacturing Processes | WOS | 15266125 | |
96 | Dynamic characterization and parametric instability analysis of rotating magnetorheological fluid composite sandwich plate subjected to periodic in-plane loading | Arumugam A.B., Ramamoorthy M., Rajamohan V., S M., S R.K. | Journal of Sandwich Structures and Materials | WOS | 1099-6362 | |
97 | Dynamic characterization of tapered laminated composite sandwich plates partially treated with magnetorheological elastomer | Vemuluri R.B., Rajamohan V., Arumugam A.B. | Journal of Sandwich Structures and Materials | WOS | 1099-6362 | |
98 | A multi-criteria decision making approach for the urban renewal in Southern India | Manupati V.K., Ramkumar M., Samanta D. | Sustainable Cities and Society | WOS | 22106707 | |
99 | Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys | Senthilnathan N., Annamalai A.R., Venkatachalam G. | Materials Science and Engineering A | WOS | 0921-5093 | |
100 | Effectiveness evaluation of molten salt processing and ultrasonic cavitation techniques during the production of aluminium based hybrid nanocomposites - An experimental investigation | Kannan C., Ramanujam R. | Journal of Alloys and Compounds | WOS | 0925-8388 | |
101 | A review of Internet of Things (IoT) embedded sustainable supply chain for industry 4.0 requirements | Manavalan, E., Jayakrishna, K. | Computers and Industrial Engineering | WOS | 0360-8352 | |
102 | Thermodynamic simulation of hydrogen based solid sorption heat transformer | Sharma V.K., Kumar E.A. | International Journal of Thermal Sciences | WOS | 1290-0729 | |
103 | A novel approach to predict the delamination factor for dry and cryogenic drilling of CFRP | Joshi S., Rawat K., A.S.S B. | Journal of Materials Processing Technology | WOS | 9240136 | |
104 | Effect of activated flux on penetration depth, microstructure and mechanical properties of Ti-6Al-4V TIG welds | Ramkumar K.D., Varma V., Prasad M., Rajan N.D., Shanmugam N.S. | Journal of Materials Processing Technology | WOS | 9240136 | |
105 | A comparative assessment on Common Rail Direct Injection (CRDI) engine characteristics using low viscous biofuel blends | Ashok B., Nanthagopal K., Chaturvedi B., Sharma S., Thundil Karuppa Raj R. | Applied Thermal Engineering | WOS | 13594311 | |
106 | Determination of physico chemical properties of biodiesel from Citrullus lanatus seeds oil and diesel blends | Sani S., Kaisan M.U., Kulla D.M., Obi A.I., Jibrin A., Ashok B. | Industrial Crops and Products | WOS | 0926-6690 | |
107 | Mesoscopic analysis of MHD double diffusive natural convection and entropy generation in an enclosure filled with liquid metal | Arun, S., Satheesh, A. | Journal of the Taiwan Institute of Chemical Engineers | WOS | 1876-1070 | |
108 | Variable stiffness laminated composite shells – Free vibration characteristics based on higher-order structural theory | Venkatachari A., Natarajan S., Ganapathi M. | Composite Structures | WOS | 2638223 | |
109 | Vibration study of curved nanobeams based on nonlocal higher-order shear deformation theory using finite element approach | Ganapathi M., Merzouki T., Polit O. | Composite Structures | WOS | 2638223 | |
110 | Studies on seasonal pollution of heavy metals in water, sediment, fish and oyster from the Meiliang Bay of Taihu Lake in China | Rajeshkumar S., Liu Y., Zhang X., Ravikumar B., Bai G., Li X. | Chemosphere | WOS | 0045-6535 | |
111 | Effect of additives on performance, combustion and emission behavior of preheated palm oil/diesel blends in DI diesel engine | Senthur Prabu S., Asokan M.A., Prathiba S., Ahmed S., Puthean G. | Renewable Energy | WOS | 9601481 | |
112 | Experimental and theoretical studies of various solar control window glasses for the reduction of cooling and heating loads in buildings across different climatic regions | G K.K., Saboor S., Kumar V., Kim K.-H., Babu T. P. A. | Energy and Buildings | WOS | 0378-7788 | |
113 | Experimental studies on the effects of enhancing the concentration of oxygen in the inducted charge of a biogas fuelled spark ignition engine | Porpatham E., Ramesh A., Nagalingam B. | Energy | WOS | 0360-5442 | |
114 | Performance, combustion and emission characteristics of diesel engine fuelled with papaya and watermelon seed oil bio-diesel/diesel blends | Asokan M.A., Senthur prabu S., Kamesh S., Khan W. | Energy | WOS | 0360-5442 | |
115 | Impact behaviour of hybrid composites for structural applications: A review | Safri S.N.A., Sultan M.T.H., Jawaid M., Jayakrishna K. | Composites Part B: Engineering | WOS | 1359-8368 | |
116 | Development and performance comparison of mixed-mode solar crop dryers with and without thermal storage | Abubakar S., Umaru S., Kaisan M.U., Umar U.A., Ashok B., Nanthagopal K. | Renewable Energy | WOS | 9601481 | |
117 | Thin layer drying kinetics and exergy analysis of turmeric (Curcuma longa) in a mixed mode forced convection solar tunnel dryer | Karthikeyan A.K., Murugavelh S. | Renewable Energy | WOS | 9601481 | |
118 | Applied and Theoretical Aspects of Conjugate Heat Transfer Analysis: A Review | John B., Senthilkumar P., Sadasivan S. | Archives of Computational Methods in Engineering | WOS | 11343060 | |
119 | An assessment on the effects of 1-pentanol and 1-butanol as additives with Calophyllum Inophyllum biodiesel | Nanthagopal K., Ashok B., Saravanan B., Patel D., Sudarshan B., Aaditya Ramasamy R. | Energy Conversion and Management | WOS | 0196-8904 | |
120 | An experimental study on the effect of nanoparticles with novel tamarind seed methyl ester for diesel engine applications | Dhana Raju V., Kishore P.S., Nanthagopal K., B.Ashok | Energy Conversion and Management | WOS | 0196-8904 | |
121 | Effect of next generation higher alcohols and Calophyllum inophyllum methyl ester blends in diesel engine | Nanthagopal K., Ashok B., Saravanan B., Korah S.M., Chandra S. | Journal of Cleaner Production | WOS | 9596526 | |
122 | A novel study on the effect lemon peel oil as a fuel in CRDI engine at various injection strategies | Ashok B., Nanthagopal K., Saravanan B., Somasundaram P., Jegadheesan C., Chaturvedi B., Sharma S., Patni G. | Energy Conversion and Management | WOS | 0196-8904 | |
123 | Design and simulation of modular casts for wrist injury | Singh A. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
124 | Effect of an additive in karanja biodiesel blends on the performance and emission characteristics of diesel engines | Babu N.T., Praneeth V.S. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
125 | Fabrication and automation of seed sowing machine using IoT | Senthilnathan N., Gupta S., Pureha K., Verma S. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
126 | Enhanced surface and mechanical properties of bioinspired nanolaminate graphene-aluminum alloy nanocomposites through laser shock processing for engineering applications | H.G P.K., S P., M A.X., S K., Lin D., Shukla P., Vasudevan V.K. | Materials Today Communications | Scopus | 23524928 | |
127 | Thermal buckling behaviour of variable stiffness laminated composite plates | Manickam G., Bharath A., Das A.N., Chandra A., Barua P. | Materials Today Communications | Scopus | 23524928 | |
128 | Enhancement of surface characteristics of direct metal laser sintered stainless steel 316L by shot peening | Sugavaneswaran M., Jebaraj A.V., Kumar M.D.B., Lokesh K., Rajan A.J. | Surfaces and Interfaces | Scopus | 24680230 | |
129 | Experimental Study on Performance Enhancement of Evacuated Tube by Constant Heat Flux Mode | Challa G.R., Natarajan M., Palayakkodan A. | Applied Solar Energy (English translation of Geliotekhnika) | Scopus | 0003-701X | |
130 | Determination of stress intensity factors of jute fiber-reinforced hybrid polymer-matrix composites | Prabaharan Graceraj P., Venkatachalam G., Garg A.S., Akhil Afsan M. | Composites: Mechanics, Computations, Applications | Scopus | 2152-2057 | |
131 | Investigation on the effect of injection pressures on the spray characteristics for diethyl ether and diesel fuel at different chamber temperatures | Thulasi V., Thundil Karuppa Raj R. | Frontiers in Heat and Mass Transfer | Scopus | 2151-8629 | |
132 | Enhanced heat transfer by thermosyphon method in electronic devices | Kannan K.G., Kamatchi R., Venkatajalapathi T., Krishnan A.S. | International Journal of Heat and Technology | Scopus | 3928764 | |
133 | Thermal and cost analysis of float and various tinted double window glass configurations on heat gain into buildings of hot & dry climatic zone in India | Gorantla K., Shaik S., Setty A.B.T.P.R. | International Journal of Heat and Technology | Scopus | 3928764 | |
134 | Active vibration control of composite beam | Babu R.V., Prasanth T., Chowdary Y., Reddy V. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
135 | Comparative study on orientation of fibers in epoxy composites reinforced with aloe-vera and palmyra fibers | Narendiranath Babu T., Tarun K.S., Bandaru S., Vattikuti M. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
136 | Deformation behaviour of magnesium alloy with varying strain rate and tested at room temperature condition | Kumar S., Kanth B.S.S., Kumar P. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
137 | Design and analysis of a new airfoil for rc aircrafts and uavs | Premkartikkumar S.R., Ashok V., Bhabhra A.R., Beladiya A. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
138 | Design and analysis of human powered hybrid vehicle | Singh K., Iyengar M.S., Iyengar N.S., Denis Ashok S. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
139 | Design of active and adaptive suspension system with pneumatic cylinder | Desharth | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
140 | Design of fins to maximize the heat transfer rate from the engine cylinder | kumar Hotta T., Sajja R.N., Sigireddy R.T., Mugala V.S. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
141 | Experimental study on performance of steam condenser in 600mw singareni thermal power plant | Senthur Prabu S., Manichandra M., Bhanu Prakash Reddy G., Raghu Vamshi D., Veera Bramham P. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
142 | Investigation of steady state forced convection heat transfer in a nanofluid cooled circular pipe | Kumar A., Kumar A., Kumar S., Govindha Rasu N. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
143 | Investigation on mechanical behaviour of glass fiber reinforced with polyurethane foam and honeycomb | Manidhar D.V., Krishna S., Vishnu Prakash V., Deepa A. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
144 | Mechanical behaviour of copper alloy with different Strain Rate at Room temperature | Galgat C., Agrawal P., Meraj M., Kumar P. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
145 | Stress and thermal analysis of clutch plate | Singhal U., Kumar R., Shursen G.S., Baskar P. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
146 | Study on influence of machinability characteristics in machining of nimonic 90A alloy using copper oxide nanofluid in MQL mode | Venkatesan K., Devendiran S., Thakur A., Ashish Chauhan V., Pavan Kalyan P.V. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
147 | Study on mechanical and tribological behaviour of Angora, kenaf and ramie hybrid reinforced epoxy composites | Narendiranath Babu T., Aravind S.S., Naveen Kumar K.S., Sumanth Rao M.S. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
148 | Study on mechanical and tribological behaviour of sisal, abaca and sun-hemp hybrid reinforced epoxy composites | Narendiranath Babu T., Talla H.K., Kokkirala S., Batta K. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
149 | Design and analysis of dental surgical fixture | Suhas H.G., Rajkumar | International Journal of Pure and Applied Mathematics | Scopus | 1311-8080 | |
150 | Finite element investigation on mode I crack tip characteristics in residually stressed glare | Bhat S., Narayanan S. | International Journal of Structural Integrity | Scopus | 1757-9864 | |
151 | Active camber and toe control strategy for the double wishbone suspension system | Kavitha C., Shankar S.A., Karthika K., Ashok B., Ashok S.D. | Journal of King Saud University - Engineering Sciences | Scopus | 1018-3639 | |
152 | A study on work life balance of female pharmacists working in private hospitals | Shekhar S.K., Jose T.P., Sudhakar R. | Research Journal of Pharmacy and Technology | Scopus | 0974-3618 | |
153 | Analysis of tensile and flexural strengths of kenaf fabricreinforced hybrid polymer matrix composite | Venkatachalam G., Vignesh P., Banarjee D., Karmakar S., Reddy D.M. | Composites: Mechanics, Computations, Applications | Scopus | 21522057 | |
154 | Causal linkage between stock markets: International evidence | Visalakshmi S., Manickavasagam J. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
155 | Design and analysis of secure data enhancement in a digital manufacturing system | Mannayee G., Pandivelan C., Boopathi M., Ponnusamy P., Mannayee V. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
156 | Development of a lap-time simulator for a FSAE race car using multi-body dynamic simulation approach | Singh C., Palanivelu S. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
157 | Impact of rising air pollution in New Delhi: An empirical study | Seema A., Sood A., Bhalla S., Bajpai S. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
158 | Impact of social plug-in options on consumer purchase intention: A special reference to facebook users | Venugopal P., Aswini Priya S., Sathish A.S., Anjani Devi S. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
159 | The mediating effect of tangibility and reliability in the patients perception of healthcare quality on patients satisfaction using Bayesian approach | Ravikumar B., Subbiah M., Sriram G. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
160 | Cylinder head bolts tightening strategies parameters finalization by Taguchi method for multi cylinder engines | Marathe A.V., Venkatachalam G., Marathe N.V. | International Review of Mechanical Engineering | Scopus | 19708734 | |
161 | Experimental investigations on flexural and fracture behaviors of flax fiber reinforced sandwich panels | Venkatachalam G., Mehta N., Shukla S., Gupta Y., Sharma A., Ghosh R., Rajan G. | International Review of Mechanical Engineering | Scopus | 19708734 | |
162 | Advanced liquid state processing techniques for ex-situ discontinuous particle reinforced nanocomposites: A review | Kannan C., Ramanujam R. | Science and Technology of Materials | Scopus | 2603-6363 | |
163 | Tensile behavior of aluminum alloy (AA7050) metal matrix composite reinforced with graphene fabricated by stir and squeeze cast processes | Venkatesan S., Anthony Xavior M. | Science and Technology of Materials | Scopus | 2603-6363 | |
164 | Flexural and fracture analysis of polymer metal hybrid composite panels reinforced with natural fibers | Kazi A., Dam R., Datta S., Venkatachalam G., Rajan G. | UPB Scientific Bulletin, Series B: Chemistry and Materials Science | Scopus | 14542331 | |
165 | Comparative analyses of biodiesel produced from jatropha and neem seed oil using a gas chromatography–mass spectroscopy technique | Kaisan M.U., Abubakar S., Ashok B., Balasubramanian D., Narayan S., Grujic I., Stojanovic N. | Biofuels | Scopus | 17597269 | |
166 | Finite element analysis of composites under different load conditions with the effect of hybridization of glass reinforcement on Kevlar fibres | Paul A.J., Gnanaraj S.D. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
167 | Novel method of improving the team goals performance level using lean and six Sigma: A case study problem | Rajini J., Nagaraju D., Narayanan S. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
168 | NSGA optimization of performance of EDM using powder mixed distilled water dielectric fluid | Syed K.H., Kuppan P. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
169 | Power flow control for the grid integrated renewable energy system | Vinifa R., Kavitha A., Selwynraj A.I. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
170 | Review on contemporary trends in radiator design and testing of automobile radiators | Vinukonda N., Sharma V.K. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
171 | Behaviour of silver streaks after plating on ABS plastics | Sreedharan J., Jeevanantham A.K., Velumani V., Manimaran C. | Journal of Engineering and Applied Sciences | Scopus | 1816949X | |
172 | Multi-response optimization of process parameters by taguchi grey relational analysis for dissimilar thickness friction stir process corner weld AA5086 alloy | Krishnan M., Subramaniam S. | Journal of Engineering Science and Technology | Scopus | 18234690 | |
173 | Thermal stress analysis of similar and dissimilar welded joints | Yelamsetti B., Rajyalakshmi G. | UPB Scientific Bulletin, Series D: Mechanical Engineering | Scopus | 14542358 | |
174 | Effect of moisture in gasification of biomass using entrained flow gasifier at constant equivalence ratio | Mohanty D.K., Padhiary A. | International Journal of Industrial and Systems Engineering | Scopus | 17485037 | |
175 | A review on non-circular journal bearings | Jose J., Behera N. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22496890 | |
176 | Drilling of carbon fibre reinforced polymer materials - A review | Venkatesh B., Sikarwar R.S. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22496890 | |
177 | A review on fabrication and performance evaluation of small wind turbine blades | Ajay V., Venkateshwarlu B., Vishnu Vardhan T. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
178 | Coiled tube heat exchangers - a review | Kruthiventi S.S., Govindha Rasu N., Kruthiventi S.S., Hanumantha Rao Y.V. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
179 | Theoretical investigation on the effect of nanofluids on heat transfer characteristics in a heat pipe | Das S., Alag G. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
180 | Impact of surface adaptation and Acacia nilotica biofiller on static and dynamic properties of sisal fiber composite | Vimalanathan P., Venkateshwaran N., Srinivasan S.P., Santhanam V., Rajesh M. | International Journal of Polymer Analysis and Characterization | Scopus | 1023666X | |
181 | Alterations of cowl lip for the improvement of supersonic-intake performance | John B., Senthilkumar P. | Journal of Applied Fluid Mechanics | Scopus | 1735-3572 | |
182 | Web-based decision system for distributed process planning in a networked manufacturing environment | Manupati V.K., Kanigalpula P.K.C., Varela M.L.R., Putnik G.D., Araújo A.F., Vieira G.G. | Studies in Computational Intelligence | Scopus | 1860-949X | |
183 | Vibrational analysis of hybrid fabric-reinforced polymer matrix curved composite beams | Jain K., Santosh Kumar B., Venkatachalam G., Vimalanand S., Ayyappan S. | Composites: Mechanics, Computations, Applications | Scopus | 21522057 | |
184 | Double diffusive natural convection in a square enclosure filled with copper-water nanofluid induced by opposite temperature and concentration gradients | Saritha N., Senthil Kumar A. | Computational Thermal Sciences | Scopus | 19402503 | |
185 | Recent advancement in cooling technologies of solar Photovoltaic (PV) system | Satpute J.B., Rajan A.J. | FME Transactions | Scopus | 14512092 | |
186 | Modelling the metrics of leagile supply chain and leagility evaluation | Aravind Raj S., Jayakrishna K., Vimal K.E.K. | International Journal of Agile Systems and Management | Scopus | 17419174 | |
187 | Parametric analysis and optimization of convective fin with variable thermal conductivity using semi-analytical solution | Arumugam V.M., Chidambaram R.K. | International Journal of Heat and Technology | Scopus | 3928764 | |
188 | Metallurgical investigations on bimetallic weld joints in austenitic/ferritic stainless steels for paper-pulp industries | Porchilamban S., John Rajan A. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22496890 | |
189 | Multi-response optimization of process parameters of green electrical discharge machining on aisi 2507 super duplex stainless steel using grey relational analysis (Gra) | Viswanthvaleti S., Radhakrishnan R., Rajyalakshmi G. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22496890 | |
190 | Production of biodiesel from refined cotton seed oil as well as its effects as fuel in diesel engine | Uttamrao K.N., Premkartikkumar S.R. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22496890 | |
191 | Vibration analysis of temperature-dependent fg-cnt reinforced composite plates | Soni S.A., Mundeja N., Swaroop A.N.S.P., Thomas B. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
192 | Non-conformity recovery and safe disposal by Poka Yoke and hallmarking in a piston unit | Sundaramali G., Abinav Shankar S., Manoj Kummar M. | International Journal of Productivity and Quality Management | Scopus | 17466474 | |
193 | Simulation of hybrid laser-tig welding process using fea | Vemanaboina H., Edison G., Akella S., Buddu R.K. | Journal of Engineering Science and Technology | Scopus | 18234690 | |
194 | Evaluation of flexural strength of epoxy resin based hybrid composites reinforced with Jute, Banana and flax natural fibers for bio medical applications | Narendiranath Babu T., Singh A.K., Mandliya A., Singh A., Rama Prabha D. | Research Journal of Pharmacy and Technology | Scopus | 9743618 | |
195 | Numerical investigation on optimal arrangement of IC chips mounted on a SMPS board cooled under mixed convection | Mathew V.K., Hotta T.K. | Thermal Science and Engineering Progress | Scopus | 24519049 | |
196 | Thermal and energy saving analysis by using tinted double window glass combinations for heat gain in buildings | Gorantla K., Shaik S., Babu A., Ranga P., Setty T. | International Energy Journal | Scopus | 1513-718X | |
197 | Productivity enhancement by component-oriented line balancing method | John Rajan A., Ramanamurthy E.V.V., Nath R., Kumar P. | International Journal of Industrial and Systems Engineering | Scopus | 1748-5045 | |
198 | Optimal design of clutch plate based on heat and structural parameters using cfd and fea | Porwal A., Tripathi A., Agrawal T., Baskar P. | International Journal of Mechanical Engineering and Technology | Scopus | 0976 – 6340 | |
199 | Modelling and analysis of assembly clearance by size and form tolerances in selective assembly using clustering algorithm | Chaitanya S.V., Jeevanantham A.K. | International Journal of Productivity and Quality Management | Scopus | 1746-6474 | |
200 | Hot corrosion studies on alloy 617 OCC in the context of its use in advanced ultra-supercritical (A-USC) power plants | Hari P.R., Arivazhagan N., Nageswara Raoa M., Pavan A.H.V. | International Journal of Pure and Applied Mathematics | Scopus | 1311-8080 | |
201 | Fatigue life prediction of doubler plate weld joint using virtual strain gauge, validation through experiments and its application | Deshmukh A.R., Venkatachalam G., Saraf M.R. | International Review of Mechanical Engineering | Scopus | 1970-8734 | |
202 | Fabrication and mechanical analysis of jute-sisal hybrid composite | Chandran M.S., Sadasivan S., Senthilkumar P., Kumar K.S., Jose A., Shijas A., Kuruvila J. | ARPN Journal of Engineering and Applied Sciences | Scopus | 1819-6608 | |
203 | ANN and RSM approach for modelling and multi objective optimization of abrasive water jet machining process | Srinath Reddy N., Tirumala D., Gajjela R., Das R. | Decision Science Letters | Scopus | 1929-5804 | |
204 | Adaptive suspension strategy for a double wishbone suspension through camber and toe optimization | Kavitha C., Shankar S.A., Ashok B., Ashok S.D., Ahmed H., Kaisan M.U. | Engineering Science and Technology, an International Journal | Scopus | 2215-0986 | |
205 | Steady-state and transient responses of a flexible eccentric spinning shaft | Dasgupta S.S., Rajan J.A. | FME Transactions | Scopus | 1451-2092 | |
206 | An aqua based reduced graphene oxide nanofluids for heat transfer applications: Synthesis, characterization, stability analysis, and thermophysical properties | Kamatchi R., Kannan K.G. | International Journal of Renewable Energy Research | Scopus | 1309-0127 | |
207 | A Study on the Influence of Process Parameters on the Viscoelastic Properties of ABS Components Manufactured by FDM Process | Dakshinamurthy D., Gupta S. | Journal of The Institution of Engineers (India): Series C | Scopus | 2250-0545 | |
208 | Effect of microwave heat treating processing on frictional behaviour of aluminium alloy 2900 composites | Ashwath P., Anthony Xavior M. | Tribology - Materials, Surfaces and Interfaces | Scopus | 1751-584X | |
209 | Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials | Raj Jeganmohan S., Gnanaraj Solomon D., Christy T.V. | Tribology - Materials, Surfaces and Interfaces | Scopus | 1751-584X | |
210 | Comparative studies of simulation, artificial neural network and fuzzy logic for laser shock peening | Kumar R.G., Gopalakrishnan A., Malav A., Panjawani H.S., Rajyalakshmi G. | UPB Scientific Bulletin, Series D: Mechanical Engineering | Scopus | 14542358 | |
211 | Determination of stress intensity factor (SIF) of coir and aloe vera fibre reinforced hybrid polymer matrix composites | Gopalan V., Pragasam V., Jog O.V., Nikam T.D., Shankar G. | UPB Scientific Bulletin, Series D: Mechanical Engineering | Scopus | 14542358 | |
212 | Calophyllum inophyllum methyl ester biodiesel blend as an alternate fuel for diesel engine applications | Ashok B., Nanthagopal K., Sakthi Vignesh D. | Alexandria Engineering Journal | Scopus | 1110-0168 | |
213 | Response optimisation in wire electrical discharge machining of AISI H11 tool steel using Taguchi - GRA approach | Vignesh M., Ramanujam R. | International Journal of Machining and Machinability of Materials | Scopus | 17485711 | |
214 | Merits and demerits of automation in manufacturing | Verma A., Saluja G. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
215 | Effect of Incorporation of Multiwalled Carbon Nanotubes on the Microstructure and Flow Behavior of Highly Concentrated Emulsions | Bhagavathi Kandy S., Simon G.P., Cheng W., Zank J., Joshi K., Gala D., Bhattacharyya A.R. | ACS Omega | Scopus | 24701343 | |
216 | Thermal analysis simulation for Laser Butt Welding of Inconel625 using FEA | Vemanaboina H., Edison G., Akella S., Buddu R.K. | International Journal of Engineering and Technology(UAE) | Scopus | 2227524X | |
217 | Day lighting and thermal analysis using various double reflective window glasses for green energy buildings | Gorantla K.K., Shaik S., Setty A.B.T.P.R. | International Journal of Heat and Technology | Scopus | 3928764 | |
218 | An identification of the best mixture composition for the joule-thomson refrigerator operating at 90 K | Kruthiventi S.S., Govindharasu N., Hanumantha Rao Y.V. | International Journal of Mechanical and Production Engineering Research and Development | Scopus | 22496890 | |
219 | Stress and vibration analysis on twostage reduction gearbox using finite elements method | Pancholi S., Patel M.N., Nikhil Kumar S.P., Narendiranath Babu T. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
220 | Technological advancements in energy conservation | Anandu N.S., Paul I.J., Rishikesh Mahadevan R. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
221 | The future of space exploration | Madan S., Choubisa M. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
222 | Collaborative manufacturing based on cloud, and on other I4.0 oriented principles and technologies: A systematic literature review and reflections | Varela M.L.R., Putnik G.D., Manupati V.K., Rajyalakshmi G., Trojanowska J., Machado J. | Management and Production Engineering Review | Scopus | 20808208 | |
223 | Cylinder Head Bolt Tightening Strategies in Case of Multi-Cylinder Engines and Its Effect on Gasket Sealing Performance, Bore Deformation and Piston Ring Conformability | Marathe A.V., Venkatachalam G., Marathe N.V. | Australian Journal of Mechanical Engineering | Scopus | 14484846 | |
224 | Dataset for evaluating fitness index using Adaptive Neuro-Fuzzy Inference System | Kulkarni C., Kulkarni S., Kandasamy J. | Data in Brief | Scopus | 23523409 | |
225 | An Overview of Parameters Influencing the Performance of Hermetic Reciprocating Compressor for Domestic Applications | Samuel K.J., Thundil Karuppa Raj R., Edison G. | International Journal of Air-Conditioning and Refrigeration | Scopus | 20101325 | |
226 | Design and flow analysis of a 2MW wind turbine | Sarma K.L.N.S., Vamsi S.K., Thottathil Varghese J., Venkateshwarlu B. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
227 | Effect of milling time on production of aluminium nanoparticle by high energy ball milling | Rijesh M., Sreekanth M.S., Deepak A., Dev K., Surendranathan A.O. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
228 | Key aspects of electric vehicle technologies-An overview | Bal D.K., Bhasarkar J.B., Sahoo B.B. | International Journal of Mechanical Engineering and Technology | Scopus | 9766340 | |
229 | Analysis Of Challenges And Opportunities Prevailing In The Indian Food Industry | Ram Swaminathan, J N V Raghuram, Shashank, | International Journal of Business and Management Invention | Scopus | 23198028 | |
230 | Computational fluid dynamics analysis of a finned tube dehumidifier for a solar humidification dehumidification desalination plant | B Monarch, C Chiranjeevi, V Tejasvi, T Srinivas, R Shankar, | Pakistan Journal of Biotechnology | Scopus | 18121837 | |
231 | COUPLED THERMOMECHANICAL ANALYSIS OF DISC BRAKE ROTOR | Yeshwanth Chowdary, Ramesh Babu Vemuluri, Piyush Patil, | International Journal of Engineering Research and Application | Scopus | 22489622 | |
232 | Cryptocurrency Bitcoin Challenges and opportunities | Visalakshmi S, Venugopal, Suraj Kushe sekhar, | SPIM International Journal of Management Research | Scopus | 23945842 | |
233 | Exergy analysis of solar photo voltaic thermal hybrid heat pump working with circular and triangular evaporator tube configurations | N Gunasekar, R Prakash, M Mohanraj, G Sathish Sharma, | Pakistan Journal of Biotechnology | Scopus | 18121837 | |
234 | Experimental Field Performance Analysis of Small Weed Remover in Sugarcane Grassland | Prabu K, | SAE International in United States | Scopus | 1487191 | |
235 | High-temperature corrosion behaviour of HVOF sprayed Cr3C2 25NiCr coated on alloy X22CrMoV12-1 at 600 oC | Akshy Prasana, Manikandan M, Sreenivasulu, Duoli, | Journal of Thermal Spray and Engineering | Scopus | ||
236 | Experimental Investigation on Laminar Separation Bubble Over an Airfoil A Review | A Immanuel Selwyn Raj, V Somashekar, | Indian Journal of Science and Technology | Scopus | 9745645 | |
237 | Tribological characteristics of Pongamia oil methyl ester | Ashok B. Nantha Gopal K. , Anil Payyappalli Mana | Jurnal Tribologi | WOS | 2289-7282 |
Last updated on:11 Jun 2020
Schools Research:
Status:
Enabled