School of Mechanical Engineering (SMEC)
VITREE - 2024 July Session - Apply Now
Awarded
| Name | Guide Name and Emp. Id | Research Title |
|---|---|---|
| Name | Guide Name and Emp. Id | Research Title |
| KUPPAN P | Dr. S. Narayanan | EXPERIMENTAL INVESTIGATION ON EDM DEEP HOLE DRILLING |
| GOVINDASAMI S | A STUDY ON EQUIVALENT DYE ADSORPTION CAPACITY OF INDUSTRIAL SLUDGE BASED ACTIVATED CARBONS | |
| BYRONSMITH RJ | COMPUTATIONAL FLUID DYNAMIC ANALYSIS OF LOW TEMPERATURE WATER GAS SHIFT MEMBRANE REACTOR | |
| RAJAY VEDARAJ I S | Dr. B V A Rao | DESIGN, ANALYSIS AND SIMULATION OF CO-OPERATIVE MANIPULATORS |
| RAMESHKUMAR GR | Dr. B V A Rao | |
| BALAJI REDDY K | Dr. S. Narayanan | SINGLE ECHELON TWO STAGE DISTRIBUTION INVENTORY SUPPLY CHAIN OPTIMIZATION MODEL FOR CONFECTIONERY INDUSTRY |
| GEETHAKARTHI A | DEVELOPMENT OF ADSORBENTS FROM TANNERY SLUDGE FOR THE REMOVAL OF REACTIVE DYES | |
| P. PRIYADARSHINI | EXPERIMENTAL INVESTIGATIONS ON FLY ASH AND BOTTOM ASH AGGREGATES IN CONCRETE | |
| JANARDHAN REDDY K | Dr. M. Adithan | DEVELOPMENT OF METHODOLOGY FOR 3D MODEL RETRIEVAL IN COLLABORATIVE ENVIRONMENTS |
| NAIJU CD | Dr. M. Adithan | INVESTIGATIONS ON THE MECHANICAL PROPERTIES AND RELIABILITY OF COMPONENTS PRODUCED BY DIRECT METAL LASER SINTERING TECHNIQUE |
| DEVENDRANATH RAMKUMAR K | Dr. N. Arivazhagan | INVESTIGATIONS ON WELDED MONEL 400 AND AISI 304 DISSIMILAR METALS |
| VENKATACHALAM G | Dr. S. Narayanan | A FINITE ELEMENT METHOD BASED FORMABILITY ANALYSIS OF PERFORATED ALUMINIUM SHEET METALS |
| VELU. S | DEVELOPMENT AND PERFORMANCE STUDIES OF POLYMERIC MEMBRANE FOR WASTEWATER TREATMENT | |
| AMUTHA R | GROUNDWATER LEVEL FORECASTING USING DATA DRIVEN MODELS FOR THAMIRABARANI AND MALATTAR BASIN, TAMIL NADU, INDIA. | |
| ANOOP RAJ J R | STUDIES ON MICROBIAL DEGRADATION OF PERCHLORATE FROM INDUSTRIAL EFFLUENT AND OTHER SOURCES | |
| SYAMSUNDAR K | Dr. S. Narayanan | DEVELOPMENT OF TWO-ECHELON INVENTORY SYSTEMS FOR SUPPLY CHAIN COORDINATION UNDER PRICE DEPENDENT DEMAND |
| KHALID HUSSAIN SYED | Dr. P. Kuppan | EXPERIMENTAL INVESTIGATIONS ON ALUMINIUM POWDER-MIXED DIELECTRIC FLUIDS FOR ELECTRICAL DISCHARGE MACHINING OF DIE STEEL |
| SRIDHAR V G | Dr. M. Adithan | DEVELOPMENT OF MACHINE VISION TECHNIQUES FOR EVALUATION OF SURFACE ROUGHNESS OF TURNED COMPONENTS USING FRONT AND BACK LIGHTING |
| ASHOK KUMAR C N | Dr. R. Deivanathan | A COMPARATIVE STUDY ON TANDEM DIES AND COMBINATION DIE IN TERMS OF PRODUCTIVITY, MANUFACTURING COST, PUNCH FORCE AND SPRING BACK |
| NAGARAJA M | Dr. R. Sundaresan | EXPERIMENTAL STUDIES IN A CIRCULATING FLUIDIZED BED BIOMASS GASIFIER |
| S HARI KUMAR | Dr. S. Karthikeyan | STUDIES ON THE CORROSION OF MILD STEEL IN ACID MEDIUM USING ANTIBIOTICS AS INHIBITORS |
| BASKAR A | Dr. M. Anthony Xavior | A STUDY ON MINIMIZATION OF MAKESPAN IN PERMUTATION FLOW SHOP SCHEDULING PROBLEMS |
| DHAKSHAYANI E | Dr. S. Narayanan | DEVELOPMENT OF NEW DEMAND FORECASTING MODELS FOR CONSUMER GOODS INDUSTRY |
| SENTHIL KUMAR S | Dr. S. Narayanan | EXPERIMENTAL INVESTIGATIONS ON FRICTION STIR WELDING OF AA6063-T6 PLATES USING ACOUSTIC EMISSION AND ELECTRICAL CURRENT MEASUREMENTS |
| GOMATHI P | Dr. A. Sivakumar | EVALUATION ON THE STRENGTH AND DURABILITY PROPERTIES OF ALKALI ACTIVATED FLY ASH AGGREGATE INCORPORATED CONCRETE COMPOSITES |
| K RAJA | Dr. S. Karthikeyan | METALIZATION OF RAPID PROTYPES OF ABS M30 AND INJECTION MOULDED PATS FOR ENHNACED MECHANICAL PROPERTIES |
| V UMASHANKAR | Dr. S. Karthikeyan | CHARACTERIZATION AND FUNCTIONAL PROPERTY EVALUATION OF DISTRIBUTED PARTICLE REINFORCED METAL MATRIX COMPOSITES |
| SUBBAIAH K | Dr. Geetha Manivasagam | STUDIES ON FRICTION-STIR AND FUSION WELDING OF ALUMINIUM-MAGNESIUM BASED ALLOYS |
| KURIAN ANTONY | Dr. N. Arivazhagan | STUDIES ON SINGLE TRACK LASER MELTING OF SS316L POWDER |
| S USHA | Dr. V. Seetharam | PROTECTION OF TRADITIONAL KNOWLEDGE IN BIO RESOURCES A STUDY WITH REFERENCE TO SHERVAROY HILLS EASTERN GHATS INDIA |
| UMASANKAR V | Dr. M. Anthony Xavior | CHARACTERIZATION AND FUNCTIONAL PROPERTY EVALUATION OF SILICON CARBIDE PARTICLE REINFORCED ALUMINIUM ALLOY MATRIX COMPOSITES |
| MANOHARAN R | Dr. R. Vasudevan | VIBRATION ANALYSIS OF A FULLY AND PARTIALLY TREATED LAMINATED COMPOSITE MAGNETORHEOLOGICAL FLUID SANDWICH PLATE |
| SHANKAR GANESH N. | Dr. T. Srinivas | THERMODYNAMIC OPTIMIZATION OF KALINA CYCLE SYSTEMS AT LOW, MEDIUM AND HIGH TEMPERATURE HEAT RECOVERIES |
| RAJKUMAR V | Dr. N. Arivazhagan | STUDIES ON CONTINUOUS AND PULSED CURRENT GAS TUNGSTEN ARC WELDING OF MARAGING STEEL TO LOW ALLOY STEEL |
| SOUNTHARARAJAN V M | Dr. A. Sivakumar | ENGINEERING PROPERTIES OF LOW CALCIUM FLY ASH BASED HIGH EARLY STRENGTH CONCRETE REINFORCED WITH STEEL FIBRES |
| SRINIVASA GUPTA N | Dr. D. Devika | MACHINE-PART CELL FORMATION USING CORRELATION ANALYSIS, MAHALANOBIS DISTANCE AND RELEVANCE INDEX |
| NIRMALA G.S. | Dr. L. Muruganandam | HYDRODYNAMIC STUDIES ON LIQUID-SOLID CIRCULATING FLUIDIZED BED |
| MANIMARAN R | Dr. R. Thundil Karuppa Raj | NUMERICAL INVESTIGATIONS OF REACTING AND NON-REACTING FLOWS IN A DIRECT INJECTION DIESEL ENGINE AND EXTENDED TOWARDS HCCI ENGINE |
| ARUN KUMAR A | Dr. A.S. Santhi | THE EFFECT OF FLY ASH ON MECHANICAL AND DURABILITY PROPERTIES OF CONCRETE |
| BALAMURUGAN S | Dr. G. Mohan Ganesh | A STUDY ON HIGH VOLUME FLY ASH CONCRETE IN REINFORCED CONCRETE BEAMS |
| JEEVA P A | Dr. S. Narayanan | IMPROVEMENT OF HARDNESS, WEAR, CORROSION RESISTANCE AND SURFACE MORPHOLOGICAL STUDIES OF MILD STEEL COMPONENTS THROUGH ELECTRODEPOSITION OF BLACK COATINGS |
| NAGARAJ M | Dr. R. Vasudevan | INVESTIGATION ON INTERLAMINAR SHEAR STRESSES IN LAMINATED COMPOSITE STRUCTURES UNDER THERMAL AND MECHANICAL LOADING |
| RAJA K | Dr. S. Karthikeyan | STUDIES ON THE SURFACE MODIFICATION AND IMPROVEMENT OF HARDNESS, WEAR, CORROSION RESISTANCE AND TENSILE PROPERTIES OF METALLIZED RAPID PROTOTYPES MADE OF ABS M30 POLYMER MATRIX |
| THIRUMALINI S | Dr. S.K. Sekar | HERITAGE LIME MORTAR CHARACTERISATION AND SIMULATION |
| MANIKANDAN M | Dr. N. Arivazhagan | DEVELOPMENT OF TECHNOLOGY BASED ON PULSED CURRENT GAS TUNGSTEN ARC WELDING FOR IMPROVING THE WELDABILITY OF NI-BASED ALLOY C-276 |
| B GISUDDIN | Dr. Pulidindi Venu Gopal | A STUDY ON EVALUATION AND EFFECTIVENESS OF TRAINING ACTIVITIES IN LARGE MANUFACTURING ORGANIZATIONS OF CHITTOOR DISTRICT ANDHRA PRADESH |
| VELU M | Dr. Sunil Bhat | STRENGTH, FRACTURE TOUGHNESS AND FATIGUE CRACK GROWTH STUDIES ON STEEL-COPPER JOINTS ARC WELDED USING NICKEL FILLER |
| PUGAZHENTHI R | Dr. M. Anthony Xavior | A STUDY ON IMPACT OF CRITICAL MACHINE(S) IN A PRODUCTION ENVIRONMENT |
| NIKHIL P G | Dr. D. Subhakar | MODELING, SIMULATION AND OPTIMALY SIZING PHOTOVOLTAIC POWER PLANTS |
| RAVI R | Dr. S.K. Sekar | EFFECT OF NATURAL POLYMERS FROM PLANTS ON THE STRENGTH AND DURABILTY PROPERTIES OF HYDRAULIC LIME MORTAR |
| SRIDHAR R | Dr. K. Devendranath Ramkumar | METALLURGICAL AND MECHANICAL CHARACTERIZATION ON DISSIMILAR WELDMENTS OF INCONEL 625 AND SAF 2205 DUPLEX STAINLESS STEEL |
| SHANKAR R | Dr. T. Srinivas | THERMODYNAMIC STUDIES ON SOLAR COOLING COGENERATION SYSTEMS |
| THAYUMANAVAN N | Dr. Pankaj Balakrishna Tambe | STRUCTURE PROPERTIES RELATIONSHIP STUDIES OF GRAPHENE REINFORCED PVA/GRAPHENE NANOCOMPOSITE FILMS |
| KANISH T C | Dr. S. Narayanan | EXPERIMENTAL INVESTIGATIONS ON MAGNETIC FIELD ASSISTED ABRASIVE FINISHING OF SS316L |
| ARIVARASU M | Dr. N. Arivazhagan | INVESTIGATIONS ON THE DISSIMILAR WELDS OF AISI 4340 LOW ALLOY STEEL AND AISI 304L AUSTENITIC STAINLESS STEEL |
| SAYIRAM G | Dr. N. Arivazhagan | AN INVESTIGATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURAL CHARACTERIZATION OF DISSIMILAR WELDS BETWEEN INCOLOY 800H AND 321 AUSTENITIC STAINLESS STEEL |
| VISWANATHAN T S | Dr. G. Mohan Ganesh | PUNCHING SHEAR STRENGTH OF R.C.C FLAT-PLATE |
| SELVA PANDIAN | Dr. D. Neeraja | STUDY OF THERMAL INSULATION IN BUILDINGS IN OMAN |
| PRABAHARAN P | Dr. K. Devendranath Ramkumar | STUDIES ON METALLURGICAL AND MECHANICAL PROPERTIES OF DISSIMILAR WELDS OF INCONEL 718 AND AISI 316L |
| MURALI G | Dr. A.S. Santhi | EVALUATION OF STRENGTH, IMPACT RESISTANCE AND RELIABILITY OF FIBER REINFORCED CONCRETE |
| RAJ KUMAR E | Dr. K. Annamalai | OPTIMIZATION OF COMPUTER AIDED FIXTURE DESIGN AND ASSEMBLY IN A VIRTUAL ENVIRONMENT |
| EDWIN SUDHAGAR | Dr. R. Vasudevan | VIBRATION ANALYSIS AND STRUCTURAL OPTIMIZATION OF ROTATING TAPERED THICK COMPOSITE PLATES |
| ANANDA BABU A | Dr. R. Vasudevan | DYNAMIC CHARACTERIZATION AND INSTABILITY ANALYSIS OF ROTATING INTACT AND DELAMINATED TAPERED COMPOSITE PLATES |
| PANDIVELAN C | Dr. A.K. Jeevanatham | MULTI OBJECTIVE OPTIMIZATION AND FORMABILITY ANALYSIS OF SINGLE POINT INCREMENTAL FORMING ON AA5052, AA6061 AND AA8011 SHEETS |
| PRABAHARAN GRACERAJ P | Dr. Venkatachalam G | INVESTIGATIONS ON MECHANICAL PROPERTIES OF JUTE FIBER REINFORCED HYBRID POLYMER MATRIX COMPOSITE |
| JACOB T VARGHESE | Dr. S. Ghosh | AN OBSERVATIONAL AND MODELLING STUDY ON MASS AND ENERGY TRANSFER PROCESSES IN TROPICAL GREEN FAÇADES |
| MATHIVANAN A | Dr. K. Devakumaran | INVESTIGATIONS ON DUAL PULSE GAS METAL ARC WELDING |
| BURRA KARUNA KUMAR | Dr. Dega Nagaraju | MATHEMATICAL MODELLING AND ANALYSIS OF CENTRALIZED AND DE-CENTRALIZED MULTI-ECHELON INVENTORY SYSTEMS UNDER PRICE DEPENDENT DEMAND VARIATIONS |
| NANTHAGOPAL K | Dr. R. Thundil Karuppa Raj | EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE EVALUATION AND TRIBOLOGICAL STUDIES OF A BIODIESEL FUELLED COMPRESSION IGNITION ENGINE |
| DRS RAGHURAMAN | Dr. R. Thundil Karuppa Raj | THERMAL PERFORMANCE OF HIGH ASPECT RATIO MICROCHANNELS USING NANOFLUIDS |
| SIVAJI JINKA | Dr. Pulidindi Venu Gopal | PERCEPTION OF HOSPITAL EMPLOYEES ON THE ACCEPTANCE AND USE OF ELECTRONIC HEALTH RECORDS AND TELEMEDICINE |
| DEVENDIRAN S | Dr. K. Manivannan | VIBRATION BASED FAULT DIAGNOSIS OF BEARING AND GEAR USING ARTIFICIAL INTELLIGENT TECHNIQUE |
| GOKUL KUMAR K | Dr. N. Arivazhagan | EFFECT OF FILLER METALS ON THE STRUCTURE- PROPERTY RELATIONSHIPS AND HIGH TEMPERATURE CORROSION STUDIES ON DISSIMILAR JOINTS OF INCONEL 625 AND AISI 316L |
| VENKATESAN K | Dr. R. Ramanujam | EXPERIMENTAL INVESTIGATION, MODELING AND OPTIMIZATION OF LASER ASSISTED HYBRID MACHINING OF INCONEL 718 ALLOY |
| VENKATESH KANNAN M | Dr. P. Kuppan | EXPERIMENTAL INVESTIGATIONS INTO HYBRID LASER-ASSISTED TURNING OF ALUMINA AND SILICON NITRIDE |
| DEEPAK RANJITH KUMAR.P | Dr. Pulidindi Venu Gopal | CONSUMER ATTITUDE AND BEHAVIOUR TOWARDS INDIAN INDEPENDENT MUSIC |
| JAYACHANDRAN R | Dr. S. Denis Ashok | DEVELOPMENT OF TORQUE FEEDBACK MODEL USING FUZZY LOGIC AND NEURAL NETWORK FOR ROAD FEEL GENERATION IN STEER-BY-WIRE SYSTEM |
| ANIL P M | Dr. R. Vasudevan | AN INVESTIGATION ON THE INFLUENCE OF SURFACE ROUGHNESS AND OXIDATION ON FRICTION AND WEAR OF MACHINED COMPONENTS UNDER DRY AND LUBRICATED CONDITIONS |
| VINAYAGAMOORTHY R | Dr. M. Anthony Xavior | INVESTIGATIONS ON DRY TURNING OF TI-6AL-4V AND OPTIMIZATION OF MACHINING PARAMETERS USING GREY RELATIONAL ANALYSIS |
| SUBAHANA K R | Dr. R. Natarajan | MODELLING AND EXPERIMENTAL INVESTIGATION OF AN IMPROVED SOLAR TUNNEL DRYER |
| SENTHIL KUMAR K | Dr. R. Thundil Karuppa Raj | EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE AND DURABILITY STUDIES OF AN AUTOMOTIVE DIESEL ENGINE FUELLED WITH ETHANOL – BIODIESEL BLENDS |
| RAMESH BABU VEMULURI | Dr. R. Vasudevan | VIBRATION ANALYSIS OF TAPERED COMPOSITE MAGNETORHEOLOGICAL ELASTOMER SANDWICH PLATES |
| MUKUND WASUDEO TRIKANDE | Dr. R. Vasudevan | INVESTIGATION ON A SEMI-ACTIVE SUSPENSION SYSTEM FOR MULTI-AXLE ARMOURED MILITARY VEHICLE |
| TRIKANDE M W | Dr. R. Vasudevan | INVESTIGATION ON A SEMI ACTIVE SUSPENSION SYSTEM FOR MULTIAXLE ARMOURED MILITARY VEHICLE |
| SUSHIL SHRIKRISHNA RAMDASI | Dr. A. Senthil Kumar | STUDY OF HYBRID ELECTRIC AND FUEL CELL VEHICLE ARCHITECTURE FOR IMPROVISATION OF ENERGY EFFICIENCY AND DRIVABILITY USING PARALLEL COMPUTING BASED CONTROL SYSTEM SUPPORTED WITH MULTILEVEL INVERTER CONFIGURATION |
| VAMSIKRISHNA MAMIDI | Dr. M. Anthony Xavior | PROPERTY EVALUATION OF ALSIC COMPOSITES AND OPTIMIZATION OF END MILLING PROCESS |
| ASHWATH.P | Dr. M. Anthony Xavior | PROCESSING AND CHARACTERIZATION OF SIC /AL2O3 PARTICLE REINFORCED AA 2900/ AA 2024 METAL MATRIX COMPOSITES |
| M NATARAJAN | Dr. T. Srinivas | DEVELOPMENT AND STUDY ON POWER FREE SELF-TRACKING MECHANISM FOR A LINEAR FOCUSED SOLAR CONCENTRATING COLLECTOR |
| MONIMOY SAHA | Dr. Pankaj Balakrishna Tambe | INFLUENCE OF SURFACTANT ASSISTED MODIFICATION OF GRAPHENE AND HEXAGONAL BORON NITRIDE NANO PLATELETS ON MECHANICAL AND THERMAL PROPERTIES OF EPOXY NANOCOMPOSITES |
| KUBADE PRAVIN RAMCHANDRA | Dr. Pankaj Balakrishna Tambe | STRUCTURE PROPERTIES RELATIONSHIP STUDIES OF HALLOYSITE NANOTUBES (HNTS) FILLED PP/ABS BLENDS AND ITS COMPOSITES |
| B ASHOK | Dr. S. Denis Ashok | DEVELOPMENT AND VALIDATION OF AN IMPROVED POSITION CONTROL STRATEGY FOR AN ELECTRONIC THROTTLE BODY |
| RAVI K | Dr. E. Porpatham | INVESTIGATIONS ON LPG FUELLED LEAN BURN SPARK IGNITION ENGINE |
| P SATHYA | Dr. R. Natarajan | DESIGN AND ANALYSIS OF ENERGY EFFICIENT SOLAR PHOTOVOLTAIC POWERED LED LIGHTING SYSTEMS |
| JEYA SARAVANAN A. | Dr. Anand A. Samuel | STUDIES ON WIND FARMS AND LAYOUT OPTIMIZATION IN TAMIL NADU CONTEXT |
| MOHAN C G | Dr. A. Satheesh | NUMERICAL INVESTIGATION OF MIXED CONVECTIVE HEAT AND MASS TRANSFER IN MAGNETOHYDRODYNAMICS FLUID FLOW WITH AND WITHOUT SORET EFFECT |
| CHALASANI CHIRANJEEVI | Dr. T. Srinivas | EXPERIMENTAL AND SIMULATION STUDIES ON TWO STAGE HUMIDIFICATION-DEHUMIDIFICATION DESALINATION AND COOLING PLANT |
| KAVITHA C | Dr. S. Denis Ashok | NEW TECHNIQUES FOR SPINDLE RADIAL ERROR MEASUREMENT IN MACHINE TOOLS USING MACHINE VISION SYSTEM |
| JAGAN V | Dr. A. Satheesh | EXPERIMENTAL AND NUMERICAL INVESTIGATION OF NON-BOILING AND BOILING TWO PHASE FLOW CHARACTERISTICS IN A PIPE |
| KALAIMATHI M | Dr. VENKATACHALAM G | PERFORMANCE ANALYSIS OF ELECTROCHEMICAL MACHINING OF MONEL 400 ALLOYS AND OPITIMIZATION OF PROCESS PARAMETERS |
| PRASHANTHA KUMAR H.G | Dr. M. Anthony Xavior | DEVELOPMENT OF GRAPHENE DISPERSION STRENGTHENED AA 6061 COMPOSITE AND SURFACE MODIFICATION USING LASER SHOCK PEENING |
| VIDHYA PRADEEP VARMA GANAPATHI RAJU | Dr. T. Srinivas | THERMODYANAMIC STUDIES ON POWER AUGMENTION WITH LOW AND INTERMEDIATE TEMPERATURE HEAT RECOVERIES |
| SENTHILNATHAN N | Dr. VENKATACHALAM G | PROCESS OF TUNGSTEN HEAVY ALLOYS USING SPARK PLASMA SINTERING |
| BASKAR P | Dr. Senthilkumar A | EXPERIMENTAL INVESTIGATION OF OXYGEN ENRICHMENT IN A DIESEL ENGINE |
| VIMALANAND S | Dr. G. Venkatachalam | THE EFFECT OF PLANT FIBER'S TRANSVERSE ISOTROPY AND POROSITY ON THE DYANAMIC CHARACTERISTICS OF THE UNIFORM AN D THICKNESS TAPERED LAMINATED COMPOSITE PLATES |
| XAVIOR AROCKIARAJ S | Dr. Kuppan P | EXPERIMENTAL INVESTGATION ON LASER ASSISTED TURNING OF SKD11 HARDENED STEEL |
| MAGESH S | Dr. Geetha Manivasagam | ELECTROCHEMICAL AND WEAR BEHAVIOR OF UNCOATED AND COATED WE-43 MAGNESIUM ALLOY FOR BIOMEDICAL APPLICATION |
| VIJAYAKUMAR T | Dr. R. Thundil Karuppa Raj | NUMERICAL INVESTGATION ON CAVITATION AND SPRAY CHARACTERISTICS OF DIETHL ETHER AND DIESEL FUELS |
| RAMESH KUMAR V K | Dr. Edison Gundabattini | ANALYSIS OF SOLAR THERMAL DESALINATION SYSTEMS |
| SIVA PRASAD D | Dr. S. Narayanan | ACTIVITY BASED COSTING SYSTEM FOR PRODUCT LIFE CYCLE AND DEVELOPMENT OF HYBRID APPROACH FOR COST ESTIMATION OF PRODUCTS |
| KRISHNA S | Dr. Narayanan S | DEVELOPMENT OF CONTROL ALGORITHMS FOR IMPROVING YAW STABILITY OF A STEER BY WIRE VEHICLE USING ACTIVE FRONT FRONT STEERING |
| VADIVELU.M.A | Dr. C. Ramesh Kumar | A STUDY ON AN ENGINE COOLING SYSTEM FOR PERFORMANCE IMPROVEMENT USING CONTROL PARAMETERS AND POLYMER MATERIALS |
| AKELLA SRIKANTH | Prof. Manikandan M | DEVELOPMENT OF GAS TUNGSTEN ARC WELDING TECHNIQUES TO PREVENT SENSITIZATION IN THE ALLOY 600 |
| SHANKAR R | Dr. T. Srinivas | THEORETICAL AND EXPERIMENTAL ANALYSIS OF PERFORMANCEAUGMENTATION OF COOLING COGENERATION CYCLE |
| VENKATESAN S | Dr. M. Anthony Xavior | CHARACTERIZATION AND PROPERTY EVALUATION OF GRAPHENE PARTICLES REINFORCED ALUMINIUM ALLOY (AA 7050) MEAL MATRIX COMPOSITES |
| AJEET BABU P K | Dr. P. Kuppan | WORKABILITY ANALYSIS OF AA6061 ALUMINIUM ALLOY DURING COLD AND WARM FORGING PROCESSES |
| SRINIVAS VISWANTH V | Dr. R. Ramanujam | STUDIES ON ECO FRIENDLY DIELECTRIC FLUIDS FOR ELECTRIC DISCHARGE MACHINING OF AISI 2507 SUPER DUPLEX STAINLESS STEEL |
| KANNAN.C | Dr. R. Ramanujam | PROCESSING AND CHARACTERIZATION OF ALUMINIUM ALLOY BASED HYBRID NANOCOMPOSITES |
| ARUN S | Dr. A. Satheesh | STUDY OF HEAT AND MASS TRANSFER CHARACTERISTICS IN MAGNETOHYDRODYNAMIC FLOW EMPHASIZING LATTICE BOLTZMANN TECHNIQUES |
| P KISHORE KUMAR | Dr. Kuppan | FABRICATION MECHANICAL CHARATERIZATION OF DRILLING OF MWCNT GFRP NANOCOMPOSITES |
| SIDHARTH DEV | Dr. K. Devendranath Ramkumar | MECHANICAL, MICROSTRUCTURAL AND HOT CORROSION STUDIES ON DISSIMILAR WELDS OF INCONEL 718 AND AISI 416 BY DIFFERENT WELDING PROCESSES AND FILLER MATERIALS |
| ATUL RAJABHAU DESHMUKH | Dr. C. Pandivelan | VIRTUAL FATIGUE LIFE PREDICTION OF FULL PENETRATION WELD JOINTS IN OFF- HIGHWAY VEHICLES" |
| LAKSHMI PATHI JAKKAMPUTI | Dr. R. Vasudevan | DYNAMIC CHARACTERIZATION AND INSTABILITY ANALYSIS OF CNT REINFORCED HYBRID NON-UNIFORM COMPOSITE PLATES |
| MANIGANDAN K | Dr. S. Senthilkumar | EXPERIMENTAL INVESTIGATIONS ON FRICTION STIR CORNER WELDING OF DISSIMILAR THICKNESS AA5086 AND AA6061 ALUMINUM ALLOYS |
| ARULMURUGAN B | Dr. M. Manikandan | STUDIES ON PULSED CURRENT AND CONTINUOUS CURRENT GAS TUNGSTEN ARC WELDING OF SUPERALLOY 68 |
| HARI P R | Dr. N. Arivazhagan | HOT CORROSION STUDIES ON ALLOY 617 OCC IN ULTRA - SUPERCRITICAL POWER PLANT ENVIRONMENT |
| OYYARAVELU R | Dr. P. Kuppan | MECHANICAL AND METALLURIGCAL PROPERTIES OF LASER AND LASER HYBRID GMA WELDED HSLA STEEL |
| JOHNY JAMES. S | Dr. A. Raja Annamalai | STUDY OF DEVELOPED AA 6061 ZRO2 COMPOSTITE USING STIR CASTING COUPLED WITH SQUEEZE CASTING |
| CHAITANYA SHRIKANT VASUDEO | Dr. A.K. Jeevanatham | MODELLING AND ANALYSIS OF MULTI-COMPONENT SELECTIVE ASSEMBLY WITH GEOMETRIC AND DIMENSIONAL TOLERANCES TO CONTROL VARIATIONS IN HIGH PRECISION ASSEMBLIES |
| SUBRAMANI P | Dr. M. Manikandan | STUDIES ON WELDING PROCESSES ON METALLURGICAL, MECHANICAL AND HOT CORROSION BEHAVIOR OF AEROSPACE 80A GRADE ALLOY |
| SREENIVASULU VUNDELA | Dr. M. Manikandan | STUDIES ON HIGH TEMPERATURE CORROSION OF THERMAL SPRAY COATED NICKEL BASED SUPERALLOY 80A IN AIR OXIDATION AND MOLTEN SALT ENVIRONMENTS |
| PAUL PRAVEEN A | Dr. R. Vasudevan | VIBRATION ANALYSIS OF MULTI-FUNCTIONAL HYBRID HONEYCOMB COMPOSITE SANDWICH PLATES |
| VEERABATHRASWAMY K | Dr. A. Senthil Kumar | CFD MODELLING AND DESIGN OPTIMIZATION OF A LOW-PRESSURE STEAM TURBINE EXHAUST HOOD |
| VEMANABOINA HARINADH | Dr. Edison Gundabattini | ANALYSIS OF THERMAL STRESSES AND ITS EFFECT IN MULTIPASS WELDING PROCESS OF SS3161 TO INCONEL625 |
| MAN MOHAN | Dr. Vinod Kumar Sharma | CHARACTERISATION OF METAL HYDRIDES FOR PERFORMANCE INVESTIGATION OF SORPTION THERMODYNAMIC SYSTEMS FOR HEATING AND COOLING APPLICATIONS |
| KAVITHA M S | Dr. S. Murugavelh | OPTIMISATION OF EXTRACTION PROCESS AND CHARACTERIZATION OF BIO DIESEL PRODUCTION FROM STERCULIA FOETIDA SEEDS |
| SUNDARAMALI G | Dr. S. Karthikeyan | IMPROVEMENT OF HARDNESS ,WEAR RESISTANCE ,CORROSION RESISTANCE ,TENSILE STRENGTH AND SURFACE MORPHOLOGICAL STUDIES OF PRESSURE DIE CAST AL 7075 USING NOVEL COATING PROCESS |
| KARTHIKEYAN A K | Dr. S. Murugavelh | EXPERIMENTAL INVESTIGATIONS AND MODELLING OF BIO MASS DRYING IN A MIXED MODE SOLAR TUNNEL DRYER |
| RAMMOHAN A | Dr. C. Ramesh Kumar | ON - BOARD LIFE TIME PREDICTION OF AUTOMOTIVE HEAD LAMPS HIGH POWER LED BASED ON THERMAL ASPECTS |
| SENTHUR PRABU S | Dr. K. Devendranath Ramkumar | INFLUENCE OF LASER PEENING AND SHOT PEENING ON FATIGUE BEHAVIOUR OF AEROSPACE GRADE TI-15V -3AL-3CR-3SN ALLOY IN DIFFERENT MATALLURGICAL CONDITIONS |
| SUDHAGARARAJAN.S | Dr. Geetha Manivasagam | INFLUENCE OF LASER PEENING AND SHOT PEENING ON FATIGUE BEHAVIOUR OF AEROSPACE GRADE TI-15V -3AL-3CR-3SN ALLOY IN DIFFERENT MATALLURGICAL CONDITIONS |
| SREEJA SADASIVAN | Dr. A. Senthil Kumar | NUMERICAL INVESTIGATIONS OF EXHAUST SYSTEM OF GAS /STEAM TURBINE USING THE ACTUATOR DISC MODEL |
| SHARAN CHANDRAN M | Dr. K. Padmanabhan | PREPARATION AND CHARACTERIZATION OF SELF REINFORCED FIBER POLYMER COMPOSITES WITH EMPHASIS ON THE FIBRE / MATRIX INTERFACE |
| ARUNSACO S | Dr. R. Thundil Karuppa Raj | “NUMERICAL AND EXPERIMENTAL INVESTIGATION ON THE EFFECT OF DESIGN AND OPERATING PARAMETERS FOR SCALED AND STACKED UP PEM-FC WITH VARIOUS FLOW FIELDS |
| MAGESHKUMAR K | Dr. N. Arivazhagan | STUDIES ON PULSED CURRENT AND CONSTANT CURRENT GAS TUNGSTEN ARC WELDING OF SUPERALLOY 617 |
| RAJINI J | Dr. Dega Nagaraju | INTEGRATION OF LEAN, SIX SIGMA AND THEORY OF CONSTRAINTS FOR PRODUCTIVITY IMPROVEMENT IN THE MANUFACTURING INDUSTRY |
| SARITHA N | Dr. A. Senthil Kumar | “CFD ANALYSIS OF THERMAL / THERMOSOLUTAL NATURAL CONVECTION IN ENCLOSURES FILLED WITH NANOFLUID |
| YELAMASETTI BALRAM | Dr. G. Rajyalakshmi | ANALYSIS OF RESIDUAL STRESSES DEVELOPED IN CONSTANT, PULSED AND INTERPULSE CURRENT GTAW DISSIMILAR WELDMENTS OF MONEL 400 AND AISI 316 |
| VIGNESH M | Dr. R. Ramanujam | “MACHINING ANALYSIS AND CHARACTERIZATION OF WIRE ELECETRICAL DISCHARGE TURNING TI-6AL-4V ALLOY” |
| MUTHU S M | Dr. M. Arivarasu | “IMPROVEMENT OF HOT CORROSION RESISTANCE OF ALLOY A286 AND ITS WELDMENTS IN SIMULATED GAS TURBINE ENVIRONMENT BY HVOF COATING” |
| KARVINKOPPA MATHEW VIJAYAKUMAR | Dr. Tapano Kumar Hotta | “NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF AIR AND PCM BASED COOLING TECHNIQUES FOR THE THERMAL CONTROL OF DISCRETE IC CHIPS” |
| NIDHI NAGARAJU | Prof. Raja Annamalai A | FABRICATION OF NOVEL CERAMIC BY MICROWAVE SINTERING |
| RAMASESHAN H | Dr. Syed Khalid Perwez | EMOTIONAL INTELLIGENCE, EMPLOYEE ENGAGEMENT AND INTENTION TO QUIT: AN EMPIRICAL STUDY |
| JEYAPANDIARAJAN P | Dr. M. Anthony Xavior | EXPERIMENTAL INVESTIGATION AND MACHINABILITY ANALYSIS OF INCONEL 718 |
| R.DINAKARAN | Prof. Karthikeyan S | STUDIES ON THE PERFORMANCE AND CORROSION RESISTANCE PROPERTIES OF NOVEL METAL/METAL OXIDE MATERIALS AS ENERGY STORAGE DEVICES |
| GIDDALURI RANJITH KUMAR | Prof. Rajyalakshmi G | CHARACTERIZATION AND CORROSION STUDIES OF TI6AL4V THROUGH SIMULATION BASED OPTIMIZED LASER PEENING PROCESS |
| SUJAI S | Prof. Devendranath Ramkumar K | EFFECT OF GRAIN BOUNDARY CARBIDE PRECIBITATION ON THE MECHANICAL INTEGRITY IN INCOLOY 925 WELDS |
| G VIDYA SAGAR REDDY | Prof. Govindha Rasu N | EXPERIMENTAL STUDIES ON THE PERFORMANCE OF LOW HEAT REJECTION ENGINE WITH DIESEL AND BIODIESEL USINGG SCR FOR NOX REDUCTION |
| SHASHIKANT | Prof. Devendra Kumar Patel | HEAT TRANSFER STUDY OF TURBULENT PLANE JET IMPINGING ONTO A MOVING FLAT PLATE AT INCLINED ANGLE |
| SATHISHKUMAR M | Prof. Manikandan M | STUDIES ON GAS TUNGSTEN ARC WELDING ON METALLURGICAL, MECHANICAL AND HOT CORROSION BEHAVIOUR OF AEROSPACE GRADE HASTELLOY X |
| NAVEEN G PATIL | Prof. Tapano Kumar Hotta | NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF HYBRID COOLING TECHNIQUES FOR THE TEMPERATURE CONTROL OF DISCRETE IC CHIPS |
| VIGNESH P | Prof. Mallikarjuna Reddy D | INVESTIGATION ON EXTRACTION, CHARACTERIZATION AND MECHANICAL PROPERTIES OF CELLULOSE MICROFIBRILS REINFORCED POLYMER COMPOSITES |
| PRASHANTH S R | Prof. Senthilkumar A | CFD MODELLING AND PERFORMANCE ANALYSIS OF A TWIN SCREW HYDROGEN EXTRUDER |
| ARUN KUMAR K | Prof. Mallikarjuna Reddy D | VIBRATION BASED STRUCTURAL DAMAGE IDENTIFICATION USING MODAL DATA AND OPTIMAL WAVELET SELECTION METHOD |
| RAMESH S | Prof. Denis Ashok S | DEVELOPMENT OF INTELLIGENT CONTROL STRATEGIES FOR IMPROVED POSITION TRACKING AND ENERGY SAVING IN AN ELECTRO-HYDRAULIC SYSTEM |
| SOUNDHAR A | Prof. Jayakrishna K | INVESTIGATIONS ON BIO-MECHANICAL PROPERTIES OF HYBRID SISAL/GLASS/CHITOSAN REINFORCED POLYMER COMPOSITE FOR ORTHOPAEDIC BONE PLATE APPLICATIONS |
| SEELAM KRUGON | Prof. Dega Nagaraju | OPTIMALITY OF INVENTORY AND SHIPMENT DECISIONS IN A MULTI ECHELON INVENTORY SYSTEMS UNDER BANK MARGIN MONEY COUPLED WITH TRADE CREDIT |
| SHREEKANT PATIL | Prof. Mallikarjuna Reddy D | DEVELOP A METHOD FOR ESTIMATING RESIDUAL STRENGTH OF COMPOSITE STRUCTURES DAMAGED BY IMPACT LOADING |
| ARUN D | Prof. Devendranath Ramkumar K | EFFECT OF WELDING PROCESSES ON THE FUSION ZONE MICROSTRUCTURES, MECHANICAL INTEGRITY AND MICROBIAL INDUCED CORROSION BEHAVIOR OF UNS S32750 SUPER-DUPLEX STAINLESS STEEL JOINTS |
| LIBU GEORGE B | Prof. Bharanidaran R | DESIGN AND DEVELOPMENT OF A MULTIPURPOSE COMPLIANT FORCEPS FOR BIOPSY APPLICATIONS |
| MOHAMMED IMRAN M | Prof. SK Ariful Rahaman | PREPARATION AND INVESTIGATION OF CARBON NANO MATERIALS/ HOLLOW GLASS MICROSPHERE REINFORCED EPOXY MATRIX COMPOSITE FOAMS |
| RAJADURAI M | Prof. Raja Annamalai A | EFFECT OF TIN (SN), MOLYBDENUM (MO) AND NICKEL (NI) ADDITIONS ON THE PHASES, MICROSTRUCTURES AND MECHANICAL PROPERTIES OF PRE-ALLOYED TI-6AL-4V THROUGH SPARK PLASMA SINTERING |
| LOGANATHAN R | Prof. Arun Tom Mathew | ANALYTICAL SOLUTION FOR LARGE DEFLECTION OF MULTILAYERED COMPOSITE CANTILEVER BEAMS WITH INTERLAYER SLIP |
| NATESH M | Prof. Manikandan M | STUDIES ON MECHANICAL, METALLURGICAL AND CORROSION BEHAVIOUR OF INCOLOY 20 WELDED WITH CONTINUOUS AND PULSED GAS TUNGSTEN ARC WELDING |
| JITHESH K | Prof. Arivarasu M | IMPROVEMENT OF HOT CORROSION RESISTANCE OF COBALT BASED ALLOY L605 AND ITS WELDMENTS BY THERMAL SPRAY COATINGS |
| ASHWATH P | Prof. Anthony Xavior M | AEROSPACE BRAKING EVALUATION OF SURFACE PROCESSED ALUMINIUM ALLOY COMPOSITES DURING DRY BRAKING CONDITIONS |
| C R SATHISH KUMAR | Prof. Satyajit Ghosh | ON THE DYNAMICS AND MICROPHYSICS OF TROPICAL AIR MASSES WITH A PARTICULAR REFERENCE TO CARBONACEOUS EMISSIONS FROM CITY SLUMS |
| MANUEL GEORGE | Prof. Akash Mohanty | INFLUENCE OF GRAPHENE DECORATED WITH GRAPHENE QUANTUM DOTS (GDGQD) REINFORCEMENT ON THE VARIOUS PROPERTIES OF EPOXY NANOCOMPOSITES |
| RAJESHKUMAR S | Prof. Manoharan R | DYNAMIC ANALYSIS OF LAMINATED COMPOSITE CNT REINFORCED MAGNETORHEOLOGICAL ELASTOMER SANDWICH BEAMS |
| M GOWTHAM | Prof. Prakash R | EXPERIMENTAL INVESTIGATION ON ADVANCED COMBUSTION STRATEGIES FOR AN ALTERNATIVE FUELLED INTERNAL COMBUSTION ENGINE |
| JOEL J | Dr. M. Anthony Xavior | DEVELOPMENT OF GRAPHENE REINFORCED ALUMINIUM ALLOY METAL MATRIX COMPOSITES AND ITS MACHINABILITY EVALUATION |
| SUBASHINI R | Dr. Lourthuraj S A | TACID KNOWLEDGE IN SOFTWARE COMPANIES: AN EMPIRICIAL STUDY |
| DEEPA A | Dr. Padmanabhan K | INFLUENCE OF NOVEL MACHINING INDUCED MOLECULAR CHANGES ON THE MECHANICAL AND DAMAGE CHARACTERIZATION OF SELF REINFORCED POLYMER COMPOSITES |
| SANJAY GUPTA | Prof. Vinod Kumar Sharma | DESIGN AND ANALYSIS OF METAL HYDRIDE REACTOR TO INVESTIGATE THE PERFORMANCE OF SINGLE- AND MULTI-STAGE SORPTION HYDROGEN COMPRESSORS |
| SHAJIULLAH NAVEED SYED | Prof. Vinod Kumar Sharma | PERFORMANCE INVESTIGATIONS ON HYDROGEN – METAL HYDRIDE BASED AND CARBON DIOXIDE – ADSORBENT BASED SORPTION REFRIGERATION SYSTEMS |
| AJITHKUMAR J P | Dr. Anthony Xavior M | MACHINABILITY STUDIES ON AL7075 BASED HYBRID COMPOSITES REINFORCED WITH SILICON CARBIDE, BORON CARBIDE, GRAPHENE AND CNT |
| ASHISH JAIN | Dr. Porpatham. E | INVESTIGATIONS ON VARIABLE VALVE ACTUATION MECHANISM FOR LIGHT COMMERCIAL VEHICLE DIESEL ENGINE |
| BAGEERATHAN T | Dr. Thundil Karuppa Raj R | VIBRATION ANALYSIS AND STRUCTURAL OPTIMIZATION OF MWCNT REINFORCED DOUBLY CURVED LAMINATED COMPOSITE SHALLOW SHELL PANEL |
| MAGESHWARAN S | Dr. Manoharan R | VIBRATION ANALYSIS AND STRUCTURAL OPTIMIZATION OF MWCNT REINFORCED DOUBLY CURVED LAMINATED COMPOSITE SHALLOW SHELL PANEL |
| SREETHUL DAS | Dr. Pandivelan C | ULTRASONIC ASSISTED GRINDING OF ALUMINA CERAMIC AND INCONEL 718 SUPERALLOY |
| KESAVULU A | Dr. Akash Mohanty | STUDY OF PHYSICAL, MECHANICAL, THERMAL, TRIBOLOGICAL, AND DYNAMIC MECHANICAL BEHAVIOUR OF ALUMINA/GRAPHENE N |
| K MOHAN KUMAR | Dr. Velmurugan V | MECHANICAL AND TRIBOLOGICAL PROPERTIES OF EPOXY BASED POLYMER MICROCOMPOSITES FOR MEMS DEVICES |
| MANAVALAN E | Dr. Jayakrishna K | DEVELOPMENT OF A ROADMAP FOR DIGITAL SUPPLY CHAIN TRANSFORMATION USING INDUSTRY 4.0 AND CIRCULAR STRATEGIES |
| PRAVEEN KUMAR M | Dr. Denis Ashok S | DEVELOPMENT OF NEURAL NETWORK BASED IMAGE PROCESSING TECHNIQUES FOR AUTOMATED INSPECTION OF LEATHER DEFECTS |
| SATHIYA MOORTHY R M | Dr. Senthil Kumar S | CHARACTERIZATION AND INVESTIGATION OF MECHANICAL, MOISTURE ABSORPTION AND DRILLING BEHAVIOR OF JUTE/CARBON FIBER HYBRID COMPOSITES |
| GOPI KANNAN K | Dr. Kamatchi R | AMELIORATED HEAT TRANSFER IN ELECTRONIC COOLING WITH DIFFERENT THERMIC FLUIDS USING THERMOSYPHON AIDED PCM HEAT EXCHANGER: AN EXPERIMENTAL STUDY |
| SATHISHKUMAR S | Dr. Mohamed Ibrahim M | INVESTIGATION ON HYDROGEN POWERED HOMOGENEOUS CHARGE COMPRESSION IGNITION AND DUAL FUEL MODES WITH MULTIPLE DIESEL INJECTION SCHEDULES USING A TWIN-CYLINDER AUTOMOTIVE ENGINE |
| SHIVANANDA MOOLYA | Dr. Satheesh A | ANALYSIS AND PREDICTION OF INCLINED MAGNETIC FIELD EFFECT AND ITS OPTIMISATION ON DOUBLE DIFFUSIVE MIXED CONVECTION |
| SOURABH KUMAR SONI | Dr. Benedict Thomas | EXPERIMENTAL INVESTIGATION ON MICROSTRUCTURAL, MECHANICAL AND MACHINING CHARACTERISTICS OF AL-BASED HYBRID NANOCOMPOSITES |
| SENTHIL KUMAR M | Dr. Senthil Kumar A | INVESTIGATIONS ON CRYOGENIC HEAT PIPES |
On Role
| Name of the Candidate | Guide (S) | Dept. |
|---|---|---|
| DINESH BABU G | Dr. Nageswara Rao M | DME |
| BASKAR P | Dr. Edison Gundabattini | DTEE |
| HEMAKUMAR S | Dr. Kuppan P | DME |
| SAKTHIRAJA V R | Dr. Edison Gundabattini | DTEE |
| SURESH E | Dr. Padmanabhan K | DME |
| VASANTHARAJU C | Dr. Naiju C D | DDA |
| JAYA GOPAL S | Dr. Porpatham. E | DAE |
| BHANAGE AMOL SADASHIV | Dr. Padmanabhan K | DME |
| SRIDHARAN K | Dr. Manoharan R | DDA |
| QURESHI ASIF MAHAMMADSAYEED | Dr. Darius Gnanaraj S | DDA |
| ANIVEL. S | Dr. Thundil Karuppa Raj R | DAE |
| K.GAYATHRI | Dr. Denis Ashok S | DDA |
| SIVAPRIYA B | Dr. Solaman Bobby S | DME |
| SUPRIYA JAGDEV KALYANKAR | Dr. Ramesh Kumar C | DAE |
| PAWAR PRASHANT RAMESHCHANDRA | Dr. Arun Tom Mathew | DDA |
| S.MAHENDIRAN | Dr. Ramanujam R | DME |
| J SREEDHARAN | Dr. Jeevanantham A.K | DME |
| GHATGE DAYANAND ANANDA | Dr. Ramanujam R | DME |
| RICHU THOMAS | Dr. Padmanabhan K | DME |
| LAVAKUMAR M | Dr. Padmanabhan K | DME |
| LOKESH BABU.E | Dr. Senthil Kumar S | DDA |
| KOPPULA JOHN SAMUEL | Dr. Edison Gundabattini | DTEE |
| CHANDBADSHAH S B V J | Dr. Giriraj M | DDA |
| SHERIN SAM JOSE J | Dr. Ramesh Kumar C | DAE |
| NAVEEN KUMAR GAVIRINENI | Dr. Edison Gundabattini | DTEE |
| KUMARAVEL B | Dr. Giriraj M | DDA |
| SHIJO J S | Dr. Niranjana Behera | DDA |
| KOKA TIRUMALA RAO | Dr. Arun Tom Mathew | DDA |
| SHANU PN | Dr. Senthil Kumar S | DDA |
| S SRINIVASAN | Dr. Naiju C D | DDA |
| KULKARNI SWAPNIL SHRIRAM | Dr. Satheesh A | DTEE |
| VISWANATHAN T | Dr. Soumen Pal | DME |
| A SANKARKUMAR | Dr. Karthikeyan S | SAS |
| K MOHANAM | Dr. Karthikeyan S | SAS |
| RAVI S | Dr. Arun Tom Mathew | DDA |
| ABU MANI | Dr. Pankaj Balakrishna Tambe | BHOPAL |
| A. GURU | Dr. Venkatachalam G | CHENNAI |
| DINESH KUMAR R | Dr. Thundil Karuppa Raj R | DAE |
| SARAVANAN S | Dr. Ramesh Kumar C | DAE |
| VIJAYKUMAR DNYANDEO KAMBLE | Dr. Arun Tom Mathew | DDA |
| JOSHI SANTOSH PRAKASH | Dr. SK Ariful Rahaman | DME |
| VELUDURTHI AJAY | Dr. Venkateshwarlu B | DME |
| SUDHAKAR UPPALAPATI | Dr. Thangaraja J | DAE |
| MUTHUKRISHNAN K | Dr. Ramesh Kumar C | DAE |
| SANTOSH KUMAR B | Dr. Soumen Pal | DME |
| RUTUJA RAVERKAR | Dr. Senthil Kumar S | DDA |
| BENJAMIN ROHIT | Dr. Nageswara Rao M | DME |
| MADDIGATLA VINOD KUMAR REDDY | Dr. Ramesh Babu Vemuluri | DDA |
| KRUTHIVENTI SAI SARATH | Dr. Govindha Rasu N | DAE |
| K BABU RAO | Dr. Mallikarjuna Reddy D | DDA |
| B S LAKSHMI PRASAD | Dr. Raja Annamalai | DME |
| MOHAMMED THALIB BASHA G | Dr. Venkateshwarlu B | DME |
| JIJO JOSE | Dr. Niranjana Behera | DDA |
| JAYA KRISHNA N | Dr. Dega Nagaraju | DME |
| K VEERA RAGHAVULU | Dr. Govindha Rasu N | DAE |
| S VIJAYA KUMAR REDDY | Dr. Premkartikkumar SR | DAE |
| RAJESH P | Dr. Srinivasa Gupta N | DME |
| ANAND RAJ R | Dr. Senthil Kumar S | DDA |
| ANBUMANI D | Dr. Jeevanantham A.K | DME |
| JIM ALEXANDER | Dr. Porpatham. E | DAE |
| CHAITHANYA KALANGI | Dr. Venkateshwarlu B | DME |
| K.PAVAN KUMAR REDDY | Dr. Jeevanantham A.K | DME |
| V.CHANDRA SEKAR | Dr. Devendranath Ramkumar K | DME |
| BALJIT SINGH | Dr. Akash Mohanty | DDA |
| SIVA T | Dr. Raja Annamalai | DME |
| BANU MURTHY S P | Dr. Bharanidaran R | DDA |
| KAUTKAR NITIN UTTAMRAO | Dr. Premkartikkumar SR | DAE |
| GOPIDESI RADHA KRISHNA | Dr. Premkartikkumar SR | DAE |
| DINEK R | Dr. Arivarasu M | DDA |
| INGOLE VILAS MOTIRAM | Dr. Niranjana Behera | DDA |
| ABDUL HAKEEM JAVEED V M | Dr. Bibin John | DTEE |
| SUDIP K R PAUL | Dr. SK Ariful Rahaman | DME |
| VENKATESH KANNAN M | Dr. Arivazhagan N | DME |
| TILE PRASHANT SURESH | Dr. Benedict Thomas | DDA |
| NARAYANA MOORTHY N | Dr. Kanish T.C | DDA |
| JOHN GEORGE | Dr. Sreekanth M S | DME |
| REBIN SANFORD B | Dr. Arivarasu M | DDA |
| B GANGADHARA TILAK KANETI | Dr. Dega Nagaraju | DME |
| DEVUNURI SURESH | Dr. Porpatham. E | DAE |
| SYED AMJAD AHMED | Dr. Bibin John | DTEE |
| NIVIN CHACKO | Dr. Thangaraja J | DAE |
| SOMASHEKAR V | Dr. Immanuel Selwyn Raj A | DTEE |
| JAYESH P | Dr. Bibin John | DTEE |
| SHAIKH FIROZ AHMED AKBAR ALI | Dr. Akash Mohanty | DDA |
| AKKULA MURALI | Dr. Velu M | DDA |
| SHAIK INAYATH | Dr. Rajkumar E | DDA |
| KURIAN JORY | Dr. Satheesh A | DTEE |
| D CHINNA CHENNAIAH | Dr. Immanuel Selwyn Raj A | DTEE |
| SREENIVASULU BEZAWADA | Dr. Rajyalakshmi G | DME |
| VICKNESH KUMAR Y | Dr. Giriraj M | DDA |
| CALVIN SAMUEL S | Dr. Arivarasu M | DDA |
| ROSHITH P | Dr. Arivarasu M | DDA |
| KARUNAKARAN C | Dr. Oyyaravelu R | DME |
| MADHU SUDAN REDDY D | Dr. Nantha Gopal K | DAE |
| CHAITHANYA VINAY V | Dr. Mohan Varma. D.S | DDA |
| ABHISHEK KUMAR JHA | Dr. Sovan Sundar Dasgupta | DDA |
| LAKSHMI NARAYANAN V | Dr. Ramakrishnan R | DDA |
| SARAVANAKUMAR T | Dr. Thangaraja J | DAE |
| GNANA PRAKASH | Dr. Raja K | DME |
| SUGUMAR N | Dr. Giriraj M | DDA |
| NALAWADE JAYANT KRISHNAJI | Dr. Prakash R | DTEE |
| DOLLU BHASKAR | Dr. Prakash R | DTEE |
| SANDESH GHATE | Dr. Denis Ashok S | DDA |
| BELLAM VENKATESH | Dr. Rahul Singh Sikarwar | DDA |
| GHATAGE PANKAJ SHAMRAO | Dr. Edwin Sudhagar P | DDA |
| ANBU P | Dr. Denis Ashok S | DDA |
| JITENDRA SATPUTE | Dr. John Rajan A | DME |
| GADHAM SETTY GURU MAHESH | Dr. Jayakrishna K | DME |
| SACHIN BHIMRAO KHOT | Dr. Thiagarajan S | DME |
| RAKESH VILASRAO MULIK | Dr. Senthil Kumar A | DAE |
| MUNAGALA N V R L KUMAR | Dr. Ramakrishnan R | DDA |
| RAHUL WARGHANE | Dr. Rajkumar E | DDA |
| PRAKASH R | Dr. Kamatchi R | DTEE |
| PRADIP SHAHAJI PATIL | Dr. Akash Mohanty | DDA |
| DILEEP KUMAR GANJI | Dr. Rajyalakshmi G | DME |
| CHAITALI GAJANAN NALAWADE | Dr. Akash Mohanty | DDA |
| K HARSHAVARDHAN REDDY | Dr. Nantha Gopal K | DAE |
| SHAIK JAVEED | Dr. Satheesh A | DTEE |
| SIDDHARTH GUMBER | Dr. Satyajit Ghosh | DTEE |
| FREDERICK EMMANUEL V | Dr. Premkartikkumar SR | DAE |
| MOOPURI GANGARAJU | Dr. Sakthivel P | DAE |
| SATHISH SHARMA G | Dr. Prakash R | DTEE |
| NAGARAJAN . R | Dr. Murugavelh S | CO2 |
| MAGDUM ROHIT ABHAYKUMAR | Dr. Pandivelan C | DME |
| KUMBHAR SURAJKUMAR GORAKSHA | Dr. Edwin Sudhagar P | DDA |
| PRASHANT SAMPATRAO JADHAV | Dr. Chinmaya Prasad Mohanty | DME |
| RENU KIRAN SHASTRI | Dr. Chinmaya Prasad Mohanty | DME |
| S LAKSHMI NARAYANA | Dr. Venkatachalam G | CHENNAI |
| SHELAR PRASHANT BAJIRAO | Dr. Narendra Kumar U | DME |
| P V N VENKATA MALLIKARJUNA | Dr. Giriraj M | DDA |
| AKASH VIJAYKUMAR BIRADAR | Dr. Rijesh M | DME |
| MIDHUN PRASAD K | Dr. Murugavelh S | CO2 |
| SURYAWANSHI ABHIJEET SHIVAJI | Dr. Niranjana Behera | DDA |
| DEEPAK B | Dr. Mohamed Ibrahim M | DAE |
| VIJAYARAJ K | Dr. Prakash R | DTEE |
| MADURU VENKATA RAMANA | Dr. Saboor S | DTEE |
| CHANDRASEKAR P | Dr. Dega Nagaraju | DME |
| ASHWIN JACOB | Dr. Ashok B | DAE |
| MANOJ SHYAMRAO CHOUDHARY | Dr. Vinod Kumar Sharma | DTEE |
| P RASHEEDA | Dr. Rahul Singh Sikarwar | DDA |
| PRAVEENKUMAR K | Dr. Geetha Manivasagam | DME |
| CHELLIAH.A | Dr. Saboor S | DTEE |
| PANABAKAM DEVKIRAN | Dr. Rajesh M | DDA |
| BEYANAGARI SUDHEER REDDY | Dr. Jayakrishna K | DME |
| GOPINATH K V | Dr. Padmanabhan K | DME |
| V LOKESH VARMA | Dr. Narendiranath Babu T | DDA |
| HARIHARAN | Dr. Vasudevan R | DDA |
| NAGAPRIYA C N | Dr. Denis Ashok S | DDA |
| ABHIJEET BHUPAL VANTE | Dr. Ramakrishnan R | DDA |
| DATHI S N V RAJASEKHAR RAO | Dr. Bibin John | DTEE |
| XAVIER AROCKIARAJ S | Dr. Kuppan P | DME |
| FAKRUDEEN ALI AHAMED J | Dr. Pandivelan C | DME |
| AKELLA SRIKANTH | Dr. Venkateshwarlu B | DME |
| KRISHNA PRASAD V | Dr. Manoharan R | DDA |
| VINEETH KUMAR V | Dr. Senthil Kumaran S | DME |
| ANIL KUMAR G | Dr. Nantha Gopal K | DAE |
| VIGNESH R | Dr. Ashok B | DAE |
| SELVARAJI M | Dr. Sekarapandian N | DTEE |
| ANAND N | Dr. Vasudevan R | DDA |
| VEMULA PRUTHVIRAJ | Dr. Kamatchi R | DTEE |
| PAJARLA SAITEJA | Dr. Ashok B | DAE |
| QUBERK JEEVA SINGH C | Dr. Rajamurugan G | DME |
| VINEETH V K | Dr. Devendra Kumar Patel | DTEE |
| AMIT KUMAR PANIGRAHY | Dr. Tapano Kumar Hotta | DTEE |
| SIVAYAZI KAPPAGANTULA | Dr. Giriraj M | DDA |
| A.M.ANUSHREE KIRTHIKA | Dr. Nageswara Rao M | DME |
| SHIYAS K.A | Dr. Ramanujam R | DME |
| ANEEZ KUNDUKULATHIL | Dr. Vasudevan R | DDA |
| SUREKHA.G | Dr. Vasudevan R | DDA |
| THIYAGU C | Dr. Narendra Kumar U | DME |
| BIBIN JOSE | Dr. Manikandan M | DDA |
| K NAGIREDDY | Dr. Ramesh Babu Vemuluri | DDA |
| UDAY KN | Dr. Rajamurugan G | DME |
| AMARNATH M | Dr. Prabu K | DAE |
| VENUGOPAL B | Dr. Vasudevan R | DDA |
| PRAVEEN KUMAR V | Dr. Vinoth Jebaraj A | DDA |
| RAKESH C | Dr. Balaji K | DTEE |
| VIVEK.T | Dr. Balaji K | DTEE |
| D PRAVEEN KUMAR | Dr. Vinoth Jebaraj A | DDA |
| ELANGOVAN T | Dr. Ponnusamy P | DTEE |
| TOM SAJU | Dr. Velu M | DDA |
| SANTOSH S BAGEWADI | Dr. Ranjeet Kumar | DME |
| JAYARAMAN | Dr. Prabu K | DAE |
| GOLLANGI RAJU | Dr. Nagamalleswara Rao | CDMM |
| BASKARAN K | Dr. Mohan C.G | DTEE |
| VINOTH KUMAR P | Dr. Jayaprakash Narayan M | DTEE |
| RAVI TEJA TIRUMALAPUDI | Dr. Rajay Vedaraj I.S | DDA |
| DHILIPKUMAR T | Dr. Rajesh M | DDA |
| ANAND N | Dr. Senthil Kumaran S | DME |
| JAMES JOSEPH | Dr. Thiagarajan S | DME |
| BINEESH C P | Dr. Anandavel K | DDA |
| ANWARSHA. A | Dr. Narendiranath Babu T | DDA |
| Mohan C C | Dr. Chiranjeevi C | DTEE |
| ESSUMAN CHARLES BENJAMIN | Dr. Porpatham. E | DAE |
| MRUDHUSHA MOHANAN | Dr. Suraj Kushe Shekhar | DTM |
| SNEHA K | Dr. Suraj Kushe Shekhar | DTM |
| KEERTHANA D | Dr. Gemini V. Joy | DTM |
| ROSHINI S | Dr. Gemini V. Joy | DTM |
| SHAPLY ABDUL KAREEM | Dr. Pulidindi Venu Gopal | DTM |
| YUVARAJ D | Dr. Pulidindi Venu Gopal | DTM |
| RENANGI SANDEEP | Dr. Arivazhagan N | DME |
| KARTHICK C | Dr. Nantha Gopal K | DAE |
| BARATH KUMAR M D | Dr. Manikandan M | DDA |
| PREM KUMAR M | Dr. Manikandan M | DDA |
| BENNI AJITH A | Dr. Prakash R | DTEE |
| ADARSH S J | Dr. Arivazhagan N | DME |
| BIBIN B S | Dr. Edison Gundabattini | DTEE |
| BALA MURALI N | Dr. Manikandan M | DDA |
| NIVASH | Dr. Sakthivadivel D | DTEE |
| KARTHIKEYAN V M | Dr. Senthil Kumaran S | DME |
| VENKATA RAMANAN S | Dr. Ponnusamy P | DTEE |
| MUTHUKUMARAN G | Dr. Edwin Sudhagar P | DDA |
| SHRISWAROOP S | Dr. Nirmala Grace | CNR |
| KUMARAN.V | Dr. Muralidharan B | DME |
| CALEB DANIEL R | Dr. Edwin Sudhagar P | DDA |
| NANDHAKUMAR.E | Dr. Kamatchi R | DTEE |
| SAKTHI PRIYA M | Dr. Sakthivadivel D | DTEE |
| S. S. ANUJ SRIVATHSA | Dr. Muralidharan B | DME |
| TIRUPATHI | Dr. Raja Sekhar Y | DTEE |
| AVINASH T | Dr. Rahul Singh Sikarwar | DDA |
| BHARATHI P | Dr. Sampath Kumar T | DME |
| ARUNKUMAR E | Dr. Devendiran S | DDA |
| SATHISH KUMAR T | Dr. Ashok B | DAE |
| MAHENDRAN T | Dr. Renold Elsen S | DDA |
| SHASHIKUMAR S | Dr. Sreekanth M S | DME |
| SOURABH SHARMA | Dr. Arun Tom Mathew | DDA |
| SHIVA KUMAR G N | Dr. Rajamurugan G | DME |
| PRAVEENKUMAR B | Dr. Darius Gnanaraj S | DDA |
| JOBEL JOSE | Dr. Senthil Kumar A | DAE |
| MADHANKUMAR A | Dr. Anthony Xavior M | DME |
| VENKATRAMAN M | Dr. Anthony Xavior M | DME |
| JAGADEESH.B | Dr. Kuppan P | DME |
| ASHISH DANIEL | Dr. Solaman Bobby S | DME |
| MADESH R | Dr. Gokul Kumar K | DDA |
| NANDHAKUMAR S | Dr. Gokul Kumar K | DDA |
| ARUNPRAKASH S | Dr. Gokul Kumar K | DDA |
| BIBHASH KUMAR | Dr. Kanish T.C | DDA |
| PEDPATI PRITHVI RAJ | Dr. Ramesh Kumar C | DAE |
| SHENBAGAMUTHURAMAN V | Dr. Nantha Gopal K | DAE |
| M YUGANDHAR | Dr. Chinmaya Sahu | DDA |
| RALLABANDI SIVA KRISHNAM RAJU | Dr. Rajay Vedaraj I.S | DDA |
| SHASHANK RAJKUMAR R | Dr. Jeevanantham A.K | DME |
| LOKESH RAJ K | Dr. Jeevanantham A.K | DME |
| GOKULAKRISHNAN J | Dr. Manoharan R | DDA |
| NARAYANAN T | Dr. Manoharan R | DDA |
| SIVALINGAM | Dr. Senthil Kumar S | DDA |
| ARUN SAM VARGHESE M | Dr. Sreekanth M S | DME |
| JAKIE SHERAF | Dr. Darius Gnanaraj S | DDA |
| THANABAL N | Dr. Seenuvasaperumal P | DDA |
| BALAMURALI.D | Dr. Natarajan M | DTEE |
| VINOTHKUMAR C | Dr. Rajyalakshmi G | DME |
| GNANASEKARAN M | Dr. Satheesh A | DTEE |
| C.SASIKUMAR | Dr. Oyyaravelu R | DME |
| KUMARESH.D | Dr. Venkatesan S | DDA |
| GOUTHAMRAJ KANAPAKALA | Dr. Venkatesan S | DDA |
| ADARSH MATHEW ABRAHAM | Dr. Venkatesan S | DDA |
| T.MURALI | Dr. Devendiran S | DDA |
| ASHOK | Dr. Ravi K | DAE |
| ELUMALAI R | Dr. Ravi K | DAE |
| DEEPAK SAMBHAJI BHOSALE | Dr. Ravi K | DAE |
| BHARATH H | Dr. Venkatesan K | DDA |
| PEMMAREDDY SAITEJA | Dr. Ashok B | DAE |
| GURUSAMY A | Dr. Ashok B | DAE |
| SEETHARAM V | Dr. Ramanujam R | DME |
| CHITHAMBARAM K | Dr. Senthilnathan N | DDA |
| RAJESH.S | Dr. Chiranjeevi C | DTEE |
| SOMASUNDARAM M | Dr. Narendra Kumar U | DME |
| NITIN RALPH POCHONT | Dr. Raja Sekhar Y | DTEE |
| GECIL EVANGELINE T | Dr. Raja Annamalai | DME |
| DEEPU DINESAN | Dr. Bibin John | DTEE |
| RANGA DINESH S | Dr. Bibin John | DTEE |
| GUDLAVALLETI VAMSI BABU | Dr. Devendra Kumar Patel | DTEE |
| AISWARYA UNNY | Dr. Devendra Kumar Patel | DTEE |
| GANAMATAYYA KALLAYYA HIKKIMATH | Dr. Devendra Kumar Patel | DTEE |
| SACHIN D | Dr. Mallikarjuna Reddy D | DDA |
| RAMEEZ P V | Dr. Mohamed Ibrahim M | DAE |
| VINOTH KUMAR R | Dr. Kannan C | DAE |
| RAJASOZHAPERUMAL | Dr. Kannan C | DAE |
| SATHESSHKUMAR P | Dr. Immanuel Selwyn Raj A | DTEE |
| TAMILSELVAN R | Dr. Immanuel Selwyn Raj A | DTEE |
| ARUNPRAKASH R | Dr. Manikandan M | DDA |
| ANAND BIRADAR | Dr. Jayakrishna K | DME |
| KUMARAVELU P | Dr. Jayakrishna K | DME |
| HARIBASKAR R | Dr. Sampath Kumar T | DME |
| RAGHURAMAN | Dr. Sampath Kumar T | DME |
| GIRIJA M | Dr. Sampath Kumar T | DME |
| S RAJA | Dr. John Rajan A | DME |
| RAJESHKANNAN R | Dr. Muralidharan B | DME |
| A VISHNU PRIYA | Dr. Saboor S | DTEE |
| KARTHICK M P G | Dr. Chinmaya Prasad Mohanty | DME |
| VIRAJ VISHWAS PATIL | Dr. Chinmaya Prasad Mohanty | DME |
| RUBESH RAJA V | Dr. Ponnusamy P | DTEE |
| MOULIKA G | Dr. Ponnusamy P | DTEE |
| PRABAKARAN.V | Dr. Ponnusamy P | DTEE |
| ILANCHEZHIYAN | Dr. Ponnusamy P | DTEE |
| SENTHILRAJ K | Dr. Rajamurugan G | DME |
| HARI VENKIT | Dr. Senthil Kumaran S | DME |
| DEEPAK C N | Dr. Aruna Kumar Behura | DTEE |
| INTURU SRINIVAS | Dr. Sekarapandian N | DTEE |
| KARTHICK.T | Dr. Renold Elsen S | DDA |
| UMANATH P | Dr. Renold Elsen S | DDA |
| R.VINOTH KUMAR | Dr. Srinivasan Narayanan | DME |
| GOUDILYAN M | Dr. Prabu K | DAE |
| NARGATTI KIRAN ISHWAR | Dr. Ahankari Sandeep Sureshrao | DME |
| NITHIN MITHRA S | Dr. Ahankari Sandeep Sureshrao | DME |
| ARUNMOZHI B | Dr. Sudhakara Pandian R | DME |
| SANKHADEEP BOSE | Dr. Mangaiyarkarasi R | CNR |
| D RAMAKRISHNA | Dr. Gunji Bala Murali | DDA |
| GANESH CHOUHAN | Dr. Gunji Bala Murali | DDA |
| MUSTHAFA B | Dr. Asokan M A | DTEE |
| ARAVINDAN M | Dr. Praveen Kumar G | DTEE |
| DIVYA LAXMI G S | Dr. Sakthivadivel D | DTEE |
| SILAMBARASAN R | Dr. Seenuvasaperumal P | DDA |
| YUVAARAJ J S | Dr. Somasundharam S | DTEE |
| PRAGYA THAKUR | Dr. D Vincent Herald Wilson | DTM |
| PARTHIBAN S | Dr. Krishna S | DAE |
| ANANDHAN V | Dr. Edwin Sudhagar P | DDA |
| GOPINATHAN RL | Dr. Mohamed Ibrahim M | DAE |
| SENTHAMIZH SELVAN S | Dr. Rajay Vedaraj I.S | DDA |
| BALAJI B | Dr. Renold Elsen S | DDA |
| KAKUMANU SUVARNA JAYA PRAKASH | Dr. Vinod Kumar Sharma | DTEE |
| SHAHID QAYOOM | Dr. Thangaraja J | DAE |
| NANDHAKUMAR R | Dr. Venkatesan K | DDA |
| GOKULRAJ K | Dr. Edison Gundabattini | DTEE |
| RAMESHKUMAR R | Dr. Padmanabhan K | DME |
| DEEPAN K | Dr. Renold Elsen S | DDA |
| KUMARESAN N | Dr. Rammohan A | ARC |
| NARISIMHA MURTY T | Dr. Rajasekhara Reddy Mutra | DDA |
| RAVI SEKHAR BHAVANASI | Dr. Sivaprasad Darla | DME |
| ELANGO V | Dr. Devendiran S | DDA |
| ANANTH PAI | Dr. Balaji K | DTEE |
| JERRIN JOY VARUGHESE | Dr. Sreekanth M S | DME |
| HARISH KUMAR S | Dr. Kanish T.C | DDA |
| KARTHIKEYAN B | Dr. Praveen Kumar G | DTEE |
| MEGHAVATH MOTHILAL | Dr. Atul Kumar | DME |
| RAVI VS | Dr. Dega Nagaraju | DME |
| UVANARAYANAN C | Dr. Suya Prem Anand P | DME |
| DINESH KUMAR P K | Dr. Darius Gnanaraj S | DDA |
| ARULMURUGAN G | Dr. Kamatchi R | DTEE |
| AKA UVARANI | Dr. Aruna Kumar Behura | DTEE |
| SREENATH S | Dr. Ashish Alex Sam | DTEE |
| PRATHIVRAJ S | Dr. Oyyaravelu R | DME |
| DIVYA THEJA K | Dr. Rajyalakshmi G | DME |
| VIGNESH P | Dr. Ashirbad Swain | DDA |
| VIGNESH AR | Dr. Oyyaravelu R | DME |
| ANEESH AM | Dr. Ashish Alex Sam | DTEE |
| KHADHAR BASHA SK | Dr. Aruna Kumar Behura | DTEE |
| VINAYAK HIREMATH S | Dr. Mallikarjuna Reddy D | DDA |
| MUPPALA PRARDHAN YOGYA | Dr. Devendranath Ramkumar K | DME |
| MANIKANDAN R | Dr. Rajasekhara Reddy Mutra | DDA |
| SELVARAJ B | Dr. Jose S | DTM |
| ANANDAN B | Dr. Manikandan M | DDA |
| RISHABH KUMAR | Dr. Anuj Kumar | DTEE |
| DEVAN BA | Dr. Mohan C.G | DTEE |
| RAJNITU RAJANAND RAKSHASKAR | Dr. Kannan C | DAE |
| VIGNESH G | Dr. Oyyaravelu R | DME |
| MANIKANDAN R | Dr. Raja Annamalai | DDA |
| VIGNESH BOOPALAN | Dr. Senthil Kumar A | DAE |
| ABIN ROY | Dr. Saboor S | DTEE |
| PRAYER RIJU | Dr. Solaman Bobby S | DME |
| VINOTHRAJ UT | Dr. Anthony Xavior M | DME |
| KATIKANI NIRANJAN KUMAR | Dr. Arivazhagan N | DME |
| RAZZAK KHAN | Dr. Anuj Kumar | DTEE |
| SAYAN ATTA | Dr. Sitaram Dash | DME |
| CLINTON WILSON BARNABAS V | Dr. Mohan Varma. D.S | DDA |
| MANIKANDAN P | Dr. Venkatesan K | DDA |
| SARAVANAN B | Dr. Asokan M A | DTEE |
| INDRA KUMAR LOKHANDE | Dr. Nishant Tiwari | DTEE |
| ROSHBE S CALOLSA | Dr. SK Ariful Rahaman | DME |
| PRAVEEN S M | Dr. Rammohan A | DAE |
| JOBIN JOSE | Dr. Tapano Kumar Hotta | DTEE |
| ARUNKANNAN C | Dr. SK Ariful Rahaman | DME |
| MOHAN RAM M | Dr. Jayakrishna K | DME |
| RAVISHANKAR R | Dr. Sudhakara Pandian R | DME |
| CHAUDHARI ASHISH DATTATRAY | Dr. Vijesh V Joshi | DAE |
| MARIMUTHU | Dr. Kamatchi R | DTEE |
| MUTHUKUMAR P | Dr. Arulvel S | DDA |
| RAJEETH KUMAR | Dr. Jeevanantham A.K | DME |
| K.JOEL ASHIRVADAM | Dr. Saboor S | DTEE |
| JAYARAM DASARI | Dr. Anthony Xavior M | DME |
| NAVEEN KUMAR C | Dr. Venkatesan S | DDA |
| PON PAVITHIRAN C K | Dr. Sakthivadivel D | DTEE |
| JOYEL PAUL | Dr. Ahankari Sandeep Sureshrao | DME |
| RAJESH A | Dr. Akash Mohanty | DDA |
| BICHITRA NANDA BEHERA | Dr. Tapano Kumar Hotta | DTEE |
| DHAYANITHI J | Dr. Tapano Kumar Hotta | DTEE |
| POOJARY JATIN BHASKAR | Dr. Vasudevan R | DDA |
| HEMANATHAN M | Dr. Manoharan R | DDA |
| MUKKA SRIKANTH | Dr. Ranjeet Kumar | DME |
| MAIARUTSELVAN V | Dr. Manoharan R | DDA |
| UDDALA SREEKANTH | Dr. Saboor S | DTEE |
| SANDEEP RAJAN N | Dr. Sakthivel P | DAE |
| SUPRITH M | Dr. Mohan Varma. D.S | DDA |
| LINCE MATHEW THOMAS | Dr. Sreekanth M S | DME |
| SAKTHI BALAN G | Dr. Aravind Raj S | DME |
| SANTHOSH MUGIL R | Dr. Somasundharam S | DTEE |
| V.B.MOHAMED FAYAS | Dr. Vinod Kumar Sharma | DTEE |
| RAJA SEKAR P | Dr. Muralidharan B | DME |
| ANANDA MURUGAN M | Dr. Nataraj G | DAE |
| GANPAT LAL RAKESH | Dr. Vinod Kumar Sharma | DTEE |
| CIBI GABRIEL GOLDWYNSINGH D R | Dr. Solaman Bobby S | DME |
| MD SAAD PATEL | Dr. Md. Faseeullakhan | DME |
| SATHISH KUMAR | Dr. Arivazhagan N | DME |
| K K HARI | Dr. Nataraj G | DAE |
PhD Scholars’ Accolades
Ms. Pragya Ramsinh Thakur (20PHD0541) has been selected for the Research Exchange at the Department of Energy Technology of KTH Royal Institute of Technology. Sweden [01/08/2022 to 30/10/2022]
Mr. Lokesh Raj K (20PHD0626) has been invited to carry out the research work at Taltech university for a period of three months from 15/08/2022 to 15/11/2022, in the field of “Additive Manufacturing of Bio-Implants”
Dr. C. Pandivelan, Dr. M. Giriraj, and Dr. Rohit Magdum (17PHD0228) published a patent (Application No. 343824-001) entitled “Design of Multi-point tools with up to twelve balls of different diameters for incremental sheet metal forming using CNC machines” DoP; 22-04-2022
Dr. Y. Rajasekhar and Mr. V. Tirupati Rao published a patent titled Bi-symmetrical Web Flow Thermal Absorber For Photovoltaic Thermal System“ [Published on 10/06/22]
Ph.D. scholars Ms. Gecil Evangeline (20PHD0037) and Mr. D. Sachin (20PHD0117) have participated in the Johnson Controls Tech Connections 2022 Global Event - White paper contest. Scholars were presented the white paper titled "Effective recycling of waste printed circuit board through Small molecule approach”. They have been declared as "WINNERS" after iterative rounds of this contest
Ms. Divya Laxmi G.S. (20PHD0180) has been awarded with "Innovation in Science Pursuit for Inspired Research (INSPIRE)" fellowship by the Department of Science and Technology (DST), New Delhi for a period of five years or completion of her Ph.D. program,
Publications
| Sl No | Month | Calendar Year | School/ Centre | Dept | Reg. No | Scholar Name | Name of the author/s | Title of paper | Name of journal | Indexed In Scopus / WOS/Pub Med / ICI / Non Scopus |
ISSN number | Impact factor |
| 1 | January | 2022 | ARC | DAE | 11PHD0071 | JAYA GOPAL S | Jeyaseelan T., Ekambaram P., Subramanian J., Shamim T. | A comprehensive review on the current trends, challenges and future prospects for sustainable mobility | Renewable and Sustainable Energy Reviews | WOS | 1364-0321 | 14.98 |
| 2 | January | 2022 | SMEC | DTEE | 18PHD0102 | MADURU VENKATA RAMANA | Shaik S., Maduru V.R., Kontoleon K.J., Arıcı M., Gorantla K., Afzal A. | Building glass retrofitting strategies in hot and dry climates: Cost savings on cooling, diurnal lighting, color rendering, and payback timeframes | Energy | WOS | 0360-5442 | 7.147 |
| 3 | January | 2022 | SMEC | DAE | 20PHD0319 19PHD0317 |
Mr. SHENBAGAMUTHURAMAN V Mr. KARTHICK C |
Shenbagamuthuraman V., Patel A., Khanna S., Banerjee E., Parekh S., Karthick C., Ashok B., Velvizhi G., Nanthagopal K., Ong H.C. | State of art of valorising of diverse potential feedstocks for the production of alcohols and ethers: Current changes and perspectives | Chemosphere | WOS | 0045-6535 | 7.086 |
| 4 | January | 2022 | SMEC | DDA | 19PHD0151 | Mr. DHILIPKUMAR T | Dhilipkumar T., Rajesh M. | Multi-scale strengthening of co-cure joints through multiwall carbon nanotube modified adhesive and GFRP pins | Composites Communications | WOS | 2452-2139 | 6.617 |
| 5 | January | 2022 | SMEC | DTEE | 17PHD0215 | SATHISH SHARMA G | Sathish Sharma G., Sugavaneswaran M., Prakash R. | Design and validation of additive manufactured catalytic converter for the control of regulated and unregulated emissions of a gasohol fuelled spark ignition engine | Fuel | WOS | 0016-2361 | 6.609 |
| 6 | January | 2022 | SMEC | DAE | 20PHD0698 | GURUSAMY A | GURUSAMY A., Bragadeshwaran A. | Critical review on recent progress of ethanol fuelled flex-fuel engine characteristics | International Journal of Energy Research | WOS | 1099-114X | 5.164 |
| 7 | January | 2022 | CIMR | DME | 17PHD0252 20PHD0184 |
RENU KIRAN SHASTRI KARTHICK M P G |
Shastri R.K., Mohanty C.P., Dash S., Gopal K.M.P., Annamalai A.R., Jen C.-P. | Reviewing Performance Measures of the Die-Sinking Electrical Discharge Machining Process: Challenges and Future Scopes | Nanomaterials | WOS | 2079-4991 | 5.076 |
| 8 | January | 2022 | CIMR | DME | 20PHD0289 | Mr. SOMASUNDARAM M | Somasundaram M., Narendrakumar U., Raja Annamalai A. | Effect of heat treatment on fatigue behaviour of stir-cast EV31A magnesium alloy | Materials Letters | WOS | 0167-577X | 3.423 |
| 9 | January | 2022 | SMEC | DAE | 16PHD0373 | KAUTKAR NITIN UTTAMRAO | Kautkar N.U., Premkartikkumar S.R. | An impact of emulsified cottonseed biodiesel with Nano additives on low heat rejection engine | Environment, Development and Sustainability | WOS | 1387-585X | 3.219 |
| 10 | January | 2022 | SMEC | DAE | 18PHD0066 | ASHWIN JACOB | Jacob A., Ashok B., Ong H.C., Le P.T.K. | Scaling-up heterotrophic cultures of C. Pyrenoidosa microalgae for sustainable synthesis of low-density biodiesel mixtures and predict CI engine behavior at optimal proportions |
Environment, Development and Sustainability | WOS | 1387-585X | 3.219 |
| 11 | January | 2022 | SMEC | DDA | 19PHD0151 | Mr. DHILIPKUMAR T | Dhilipkumar T., Rajesh M. | Effect of manufacturing processes and multi-walled carbon nanotube loading on mechanical and dynamic properties of glass fiber reinforced composites | Polymer Composites | WOS | 1548-0569 | 3.171 |
| 12 | January | 2022 | SMEC | DDA | 19PHD0151 | Mr. DHILIPKUMAR T | Dhilipkumar T., Rajesh M. | Influence of manufacturing process and GFRP pin loading on shear and dynamic behaviour of composite joints | Journal of Adhesion | WOS | 1545-5823 | 2.917 |
| 13 | January | 2022 | CIMR | DME | 20PHD0037 | GECIL EVANGELINE T | Evangeline T.G., Annamalai A.R. | Influence of heating modes on the microstructural and dielectric properties of calcium copper titanium oxide (CaCu3Ti4O12/CCTO) using conventional and microwave sintering | Journal of Materials Science: Materials in Electronics | WOS | 0957-4522 | 2.478 |
| 14 | January | 2022 | CO2 | DAE | 17MTR0019 | PRASHANTH S R | Verma S.K., Gupta V., Mukherjee S.S., Gangradey R., Srinivasan R., Arumugam S.K., Ravi Kumar P.S. | Numerical prediction of the operating point for the cryogenic twin-screw hydrogen extruder system | Cryogenics | WOS | 0011-2275 | 2.226 |
| 15 | January | 2022 | SMEC | DME | 19PHD0409 | RENANGI SANDEEP | Sandeep R., Natarajan A. | Advances in joining technologies for the innovation of 21st century lightweight aluminium-CFRP hybrid structures | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | WOS | 0954-4089 | 1.62 |
| 16 | January | 2022 | ARC | DAE | 14PHD0127 | SHERIN SAM JOSE J | Jose S.S., Chidambaram R.K. | Thermal Comfort Optimization in an Electric Vehicle | International Journal of Heat and Technology | SCOPUS | 0392-8764 | - |
| 17 | January | 2022 | SMEC | DDA | 19PHD0134 | TOM SAJU | Saju T., Velu M. | Finite Element and Experimental Analysis of Residual Stresses in Electron Beam Welded Nickel-Based Superalloys | European Journal of Computational Mechanics | SCOPUS | 2642-2085 | - |
| 18 | January | 2022 | SMEC | DDA | 17PHD0147 | RAHUL WARGHANE | Warghane R.S., Pillai R.E. | Design optimisation and development of thresher machine using artificial intelligence and machine learning | International Journal of Engineering Systems Modelling and Simulation | SCOPUS | 1755-9758 | - |
| 19 | February | 2022 | SMEC | DAE | 18PHD0189 | VIGNESH R | Ashok B., Usman K.M., Vignesh R., Umar U.A. | Model-based injector control map development to improve CRDi engine performance and emissions for eucalyptus biofuel | Energy | WOS | 0360-5442 | 7.147 |
| 20 | February | 2022 | CBCMT | DME | 18PHD0078 | PRAVEENKUMAR K | Vishnu J., Ansheed A.R., Hameed P., Praveenkumar K., Pilz S., Andrea Alberta L., Swaroop S., Calin M., Gebert A., Manivasagam G. | Insights into the surface and biocompatibility aspects of laser shock peened Ti-22Nb alloy for orthopedic implant applications | Applied Surface Science | WOS | 0169-4332 | 6.707 |
| 22 | February | 2022 | SMEC | DTEE | 17PHI0002 | SIDDHARTH GUMBER | Gumber S., Ghosh S. | An experimental and modelling analysis of cloud droplet growth from vehicular emissions with non-ideal microphysics over an Asian mega-city | Atmospheric Science Letters | WOS | 1530-261X | 2.415 |
| 23 | February | 2022 | SMEC | DME | 19PHD0407 | SHIVA KUMAR G N | ShivaKumar G.N., Rajamurugan G. | Friction stir welding of dissimilar alloy combinations—A Review | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | WOS | 0954-4062 | 1.762 |
| 24 | February | 2022 | SMEC | DTEE | 14PHD0278 | NAVEEN KUMAR GAVIRINENI | Kumar G.N., Gundabattini E. | Irreversibility analysis of various components in a supercritical thermal power plant | International Journal of Exergy | WOS | 1742-8297 | 1.383 |
| 25 | February | 2022 | ARC | DAE | 20PHD0008 | RAMEEZ P V | Rajagopal S., Pulapparambil Vallikkattil R., Mohamed Ibrahim M., Velev D.G. | Electrode Materials for Supercapacitors in Hybrid Electric Vehicles: Challenges and Current Progress | Condensed Matter | SCOPUS | 2410-3896 | - |
| 26 | March | 2022 | SMEC | DAE | 18PHD0066 | ASHWIN JACOB | Jacob A., Ashok B., Usman K.M., Kulla D.M. | Influence of post-injection parameters on the performance of continuous regeneration trap to mitigate greenhouse gas and particulate emissions from CI engine | Energy | WOS | 0360-5442 | 7.147 |
| 27 | March | 2022 | SMEC | DAE | 18PHD0189 | VIGNESH R | Vignesh R., Ashok B. | Enhancement of biofuel engine characteristics through cyclic variation and multi-variate effect of split injection parameters | Fuel | WOS | 0016-2361 | 6.609 |
| 28 | March | 2022 | SMEC | DAE | 18PHD0066 | ASHWIN JACOB | Jacob A., Ashok B., Usman K.M. | Production of Chlorella pyrenoidosa biodiesel by heterotrophic pathway to improve CI engine output characteristics using statistical approaches | Process Safety and Environmental Protection | WOS | 0957-5820 | 6.158 |
| 30 | March | 2022 | SMEC | DTEE | 18PHD0234 | VINEETH V K | Vineeth V.K., Patel D.K. | Influence of aspect ratio on the wake dynamics of a pitching wing | Physics of Fluids | WOS | 1070-6631 | 3.521 |
| 31 | March | 2022 | SMEC | DTEE | 19PHD0526 | NANDHAKUMAR.E | Nandhakumar E., Selvakumar P., Sasikumar A., Prem kumar M., Vivek E., Kamatchi R. | Facile eco-friendly synthesis of rare- earth cobaltite-based perovskite nanostructures as electrocatalysts for oxygen evolution reaction | Materials Letters | WOS | 0167-577X | 3.423 |
| 32 | March | 2022 | SMEC | DDA | 19PHD0301 | MUTHUKUMARAN G | Gunasegeran M., Sudhagar P. E. | Experimental and numerical study of transverse shear modulus for bioinspired glass fiber-reinforced polymer sandwich core | Polymer Composites | WOS | 0272-8397 | 3.171 |
| 33 | March | 2022 | SMEC | DDA | 16PHD0313 | KESAVULU A | Kesavulu A., Mohanty A. | Investigation of physical, flexural, and dynamic mechanical properties of alumina and graphene nanoplatelets filled epoxy nanocomposites | Polymer Composites | WOS | 0272-8397 | 3.171 |
| 34 | March | 2022 | SMEC | DTEE | 17PHI0002 | SIDDHARTH GUMBER | Gumber S., Ghosh S. | Quick Predictions of Onset Times and Rain Amounts from Monsoon Showers over Urban Built Environments | Atmosphere | WOS | 2073-4433 | 2.686 |
| 35 | March | 2022 | SMEC | DDA | 16PHD0021 | K BABU RAO | Babu Rao K., Mallikarjuna Reddy D. | Crack detection methodology in rotor bearing system by DWT based adaptive neuro-fuzzy inference systems | Applied Acoustics | WOS | 0003-682X | 2.639 |
| 36 | March | 2022 | SMEC | DME | 18PHD0054 | CHANDRASEKAR P | Chandrasekar P., Nagaraju D. | The Effects of Electroless Ni–P- Coated SiC and Al2O3 on Wear Behaviour and Thermal Stability of AMMCs | Arabian Journal for Science and Engineering | WOS | 2191-4281 | 2.334 |
| 37 | March | 2022 | SMEC | DTEE | 17PHI0002 | SIDDHARTH GUMBER | Gumber S., Ghosh S., Bera S., Prabhakaran T.V. | On the importance of non-ideal sulphate processing of multi- component aerosol haze over urban areas | Meteorology and Atmospheric Physics | WOS | 0177-7971 | 2.065 |
| 38 | March | 2022 | CBCMT | DME | 18PHD0078 | PRAVEENKUMAR K | Praveenkumar K., Swaroop S., Manivasagam G. | Residual Stress Distribution, Phase Transformation, and Wettability Characteristics of Laser Peened Austenitic Stainless Steel | Journal of Materials Engineering and Performance | WOS | 1059-9495 | 1.819 |
| 39 | March | 2022 | SMEC | DME | 18PHD0054 | CHANDRASEKAR P | Chandrasekar P., Nagaraju D. | The Effect of Electroless Ni–P-Coated Al2O3 on Mechanical and Tribological Properties of Scrap Al Alloy MMCs | International Journal of Metalcasting | WOS | 1939-5981 | 1.805 |
| 40 | March | 2022 | SMEC | DTEE | 19PHD0418 | BIBIN B S | Katoch A., Razak F.A., Suresh A., BS B., Gundabattini E. | Performance analysis of nano- refrigerants used in the vapor compression refrigeration system using MATLAB-Simulink | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | WOS | 0954-4062 | 1.762 |
| 41 | March | 2022 | SMEC | DME | 17PHD0081 16PHD0374 16PHD0053 |
SATHISHKUMAR M ARULMURUGAN B VIGNESH M |
Sathishkumar M., Manikandan M., Arivazhagan N., Arulmurugan B., Kumaran Selvaraj S., Vignesh M., Rajakumar S., Rajkumar S. | Hot corrosion behaviour of constant and pulsed current welded Hastelloy X in Na2SO4, V2O5, and NaCl salt mixture at 900 °C | Materials Research Express | WOS | 2053-1591 | 1.62 |
| 42 | March | 2022 | SMEC | DTEE | 19PHD0061 | Elangovan T | Elangovan T., Palanisamy P. | Performance analysis of lauric acid embedded with nanoparticles as phase change materials in heat transfer applications | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | WOS | 0954-4089 | 1.620 |
| 43 | March | 2022 | SMEC | DAE | 18PHD0189 | VIGNESH R | Chidambaram K., Ashok B., Vignesh R., Deepak C., Ramesh R., Narendhra T.M.V., Muhammad Usman K., Kavitha C. | Critical analysis on the implementation barriers and consumer perception toward future electric mobility | Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering | WOS | 0954-4070 | 1.484 |
| 44 | March | 2022 | SMEC | DTEE | 16PHD0601 | SOMASHEKAR V | Somashekar V., Immanuel Selwynraj A. | Numerical study of unmanned aerial vehicle (UAV) in dry microburst environment using large eddy simulation (LES) model | Aircraft Engineering and Aerospace Technology | WOS | 22667 | 0.975 |
| 45 | March | 2022 | CIMR | DME | 16PHD0293 | SIVA T | Srikanth M., Siva T., Annamalai A.R. | Effect of Rhenium and Gadolinium Additions on the Mechanical Properties of Ti-48Al-2Cr-2Nb Sintered Through Spark Plasma Sintering | Strength of Materials | WOS | 1573-9325 | 0.620 |
| 46 | March | 2022 | SMEC | DME | 15511 | MOHAMMED IMRAN M | Kotbi A., Imran M., Kaja K., Rahaman A., Ressami E.M., Lejeune M., Lakssir B., Jouiad M. | Graphene and g-C3N4-Based Gas Sensors | Journal of Nanotechnology | SCOPUS | 1475-7435 | - |
| 47 | April | 2022 | SMEC | DTEE | 18PHD0102 | MADURU VENKATA RAMANA | Shaik S., Nundy S., Maduru V.R., Ghosh A., Afzal A. | Polymer dispersed liquid crystal retrofitted smart switchable glazing: Energy saving, diurnal illumination, and CO2 mitigation prospective | Journal of Cleaner Production | WOS | 0959-6526 | 9.297 |
| 48 | April | 2022 | SMEC | DAE | 19PHD0431 18PHD0189 20PHD0667 |
Mr. SATHISH KUMA,T Mr. VIGNESH R Mr. PEMMAREDDY SAITEJA |
Sathish Kumar T, Ashok B., Senthil Kumar M., Vignesh R., Saiteja P., Ramachandra Bhat Hire K., Harshal Tote M., Pandey R., Jadhav A., Gupta A., Rastogi D., Ayyasamy T. | Biofuel powered engine characteristics improvement through split injection parameter multivariate optimization with titanium based nano- particle additives | Fuel | WOS | 0016-2361 | 6.609 |
| 49 | April | 2022 | SMEC | DAE | 18PHD0189 | Mr. VIGNESH R | Perumalla Vijaya Kumar, Ashok B., Kumar M.S., Vignesh R., Bhasker J.P., Kumar A.N. | Evaluation of performance, emissions and combustion attributes of CI engine using palmyra biodiesel blend with distinct compression ratios, EGR rates and nano-particles | Fuel | WOS | 0016-2361 | 6.609 |
| 50 | April | 2022 | SMEC | DAE | 18PHD0066 | Mr. ASHWIN JACOB | Jacob A, Ashok B., Muhammad Usman K., Bupesh Raja V.K., Jino L. | Synergistic effect of post injection and CART unit in extenuating Tail-Pipe pollutants in CI engine using C. pyrenoidosa microalgae biodiesel | Sustainable Energy Technologies and Assessments | WOS | 2213-1388 | 5.353 |
| 51 | April | 2022 | SMEC | DTEE | 19PHD0526 | NANDHAKUMAR.E | Eswaramoorthy N., Rajaram K. | Planar perovskite solar cells: Plasmonic nanoparticles-modified ZnO as an electron transport layer for enhancing the device performance and stability at ambient conditions | International Journal of Energy Research | WOS | 0363-907X | 5.164 |
| 52 | April | 2022 | SMEC | DME | 18PHD0232 | QUBERK JEEVA SINGH C | Singh C Q.J., Rajamurugan G. | Vibration and tribological behaviour of flax/wire mesh/hemp composite reinforced with WCFC particles | Journal of Manufacturing Processes | WOS | 1526-6125 | 5.010 |
| 53 | April | 2022 | SMEC | DME | 21PHD0243 | SAKTHI BALAN G | Ganapathy S.B., Sakthivel A.R., Sultan M.T.H., Shahar F.S., Shah A.U.M., Khan T., Sebaey T.A. | Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites | Polymers | WOS | 2073-4360 | 4.329 |
| 54 | April | 2022 | SMEC | DTEE | 19PHD0377 20PHD0180 |
SAKTHI PRIYA M DIVYA LAXMI G S |
Manivannan S.P., Gunasekaran D.L., Jaganathan G., Natesan S., Muthusamy S.M., Kim S.C., Kumar B., Poongavanam G.K., Duraisamy S. | Energy and environmental analysis of a solar evacuated tube heat pipe integrated thermoelectric generator using IoT | Environmental Science and Pollution Research | WOS | 0944-1344 | 4.223 |
| 55 | April | 2022 | SMEC | DDA | 19PHD0301 | Mr. MUTHUKUMARAN G | Gunasegeran M., Edwin Sudhagar P. | Free and forced vibration analysis of 3D printed bioinspired sandwich beam using HSDT: Numerical and experimental study | Polymer Composites | WOS | 0272-8397 | 3.171 |
| 56 | April | 2022 | SMEC | DAE | 18PHD0066 | Mr. ASHWIN JACOB | Jacob A., Ashok B. | Biosynthesis of Amyl Alcohol From Scenedesmus quadricauda Microalgae for Light Commercial Vehicle Compression Ignition Engine Using Prediction Models | Journal of Energy Resources Technology, Transactions of the ASME | WOS | 0195-0738 | 2.903 |
| 57 | April | 2022 | SMEC | DDA | 19PHD0151 | Mr. DHILIP KUMAR T | Dhilipkumar T., Rajesh M. | Influence of glass fibre reinforced polymer composite pin reinforcement on shear and dynamic behaviour of composite joint manufactured through co-cure technique | Journal of Composite Materials | WOS | 0021-9983 | 2.591 |
| 58 | April | 2022 | SMEC | DME | 19PHD0255 | Mr. UDAY K N | Uday K.N., Rajamurugan G. | Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites–a review | Journal of Adhesion Science and Technology | WOS | 0169-4243 | 2.077 |
| 59 | April | 2022 | SMEC | DDA | 17PHD0070 | ABHISHEK KUMAR JHA | Jha A.K., Dasgupta S.S. | Steady-State and Bifurcation Analysis of Nonlinear Jumps in a Non-ideal Rotor System Using Magnetorheological Fluid Dampers | Journal of Vibration Engineering and Technologies | WOS | 2523-3920 | 1.889 |
| 60 | April | 2022 | SMEC | DDA | 19PHD0258 | ANWARSHA A | Anwarsha A.,Narendiranath Babu T. | A Review on the Role of Tunable Q- Factor Wavelet Transform in Fault Diagnosis of Rolling Element Bearings | Journal of Vibration Engineering and Technologies | WOS | 2523-3920 | 1.889 |
| 61 | April | 2022 | SMEC | DAE | 16PHD0097 | K VEERA RAGHAVULU | Raghavulu K.V., Govindha Rasu N. | Taguchi optimization of process parameters used for improving tribological behaviour of graphene nanoparticle dispersed nanolubricant | Engineering Research Express | SCOPUS | 2631-8695 | - |
| 62 | May | 2022 | SMEC | DAE | 19PHD0431 | Mr. SATHISH KUMAR T | Sathish Kumar T., (TRA- 16783) Ashok B., Senthilkumar M., Saiteja P., Vignesh R ., Karthick C (TRA-16423)., Nithin P.S., Durairaj K., Saju N., Agarwal C., Bhutani S., Gadwe J. | Enhancement of engine characteristics through zirconium nano particle addition and split injection parameter optimization for the adaptability of eucalyptus biofuel in diesel engine | Fuel | WOS | 0016-2361 | 8.035 |
| 63 | May | 2022 | SMEC | DAE | 19PHD0317 | Mr. KARTHICK C | Muthuraman V.S (TRA-17222)., Patel A., Shreya V., Vaidyanathan A., Reshwanth K.N.G.L., Karthick C, Jacqueline P.J., Jan Gęca M., Ashok B., Sivagami K., Nanthagopal K. | Progress on compatibility issues of alcohols on automotive materials: Kinetics, challenges and future prospects- a comprehensive review | Process Safety and Environmental Protection | WOS | 0957-5820 | 7.926 |
| 64 | May | 2022 | SMEC | DDA | 14PHD0340 | Mr. SHIJO J S | JS S ., Behera N. | Statistical analysis of fuidized dense phase conveying of fine particles | Powder Technology | WOS | 0032-5910 | 5.640 |
| 65 | May | 2022 | SMEC | DME | 16PHD0149 | Mr. CHAITHANYA KALANGI | Kalangi C., Bolleddu V. | Microstructural characteristics and mechanical properties of thermally sprayed conventional ceramic coatings reinforced with multiwalled carbon nanotubes | Journal of Reinforced Plastics and Composites | WOS | 0731-6844 | 3.383 |
| 66 | May | 2022 | SMEC | DDA | 19PHD0406 | Mr. BARATH KUMAR M D | Kumar M.D.B., Manikandan M. | Evaluation of Microstructure, Residual Stress, and Mechanical Properties in Different Planes of Wire + Arc Additive Manufactured Nickel-Based Superalloy | Metals and Materials International | WOS | 1598-9623 | 3.451 |
| 67 | May | 2022 | SMEC | DDA | 17PHD0083 | LAKSHMI NARAYANAN V | Narayanan V.L., Ramakrishnan R., Rengaswamy R. | Real-Time testing of novel robust digital pitch controller for digital hydraulic pitch system in wind turbine | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | WOS | 1556-7036 | 2.490 |
| 68 | May | 2022 | SMEC | DDA | 15PHD0243 | Arun Kumar K | Arun Kumar K., Arumugam A.B., Mallikarjuna Reddy D., Edwin Sudhagar P., Anbumani P., Kassa M.K., Agarwal D. | Prediction of influences of size and locations of delamination on dynamic characteristics of laminated composite plate using particle swarm optimization and artificial neural network | Polymer Composites | WOS | 1548-0569 | 3.531 |
| 70 | May | 2022 | SMEC | DME | 19PHD0428 | Mr. ADARSH S J | Adarsh S.J., Natarajan A. | Review on the advancements and relevance of emerging joining techniques for aluminium to polymers/carbon fibre- reinforced polymer lightweight hybrid structures | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 1464-4207 | 2.663 |
| 71 | May | 2022 | SMEC | DDA | 19PHD0134 | TOM SAJU | Saju T., Velu M. | Characterization of Welded Joints of Dissimilar Nickel-Based Superalloys by Electron Beam and Rotary Friction Welding | Journal of Materials Engineering and Performance | WOS | 1059-9495 | 2.036 |
| 72 | May | 2022 | SMEC | DME | 19PHD0511 | Kumaran V | Kumaran V., Muralidharan B. | A thermophysical modelling of electric discharge coating process | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | WOS | 1.762 | |
| 73 | May | 2022 | SMEC | DTEE | 16PHD0601 | SOMASHEKAR V | V S., A I.S. | Aerodynamic study of low Reynolds number airfoil and mini-unmanned aerial vehicle in simulated rain environment | Aircraft Engineering and Aerospace Technology | WOS | 0002-2667 | 0.975 |
| 74 | May | 2022 | SMEC | DDA | 17PHD0269 | SURYAWANSHI ABHIJEET SHIVAJI | Suryawanshi A., Behera N. | Dental composite resin: a review of major mechanical properties, measurements and its influencing factors [Zahnmedizinischer Kompositharz: Eine Übersicht über wesentliche mechanische Eigenschaften, Messungen und ihre beeinflussenden Faktoren] | Materialwissenschaft und Werkstofftechnik | WOS | 1521-4052 | 1.034 |
| 75 | May | 2022 | SMEC | DTEE | 14PHD0278 | NAVEEN KUMAR GAVIRINENI | Gavirineni N.K., Gundabattini E. | Enhancing the energy efficiency of a supercritical thermal power plant through improved plant load factor, and optimized performance of auxiliary equipment | International Journal of Design and Nature and Ecodynamics | SCOPUS | 1755-7437 | - |
| 76 | May | 2022 | SMEC | DAE | 16PHD0072 | BAGEERATHAN T | Bageerathan T., Rajagopal T.K.R. | Investigation on elevation of sloshing liquid in the square tank under excitation using CFD and RSM | International Journal of Environmental Technology and Management | SCOPUS | 1466-2132 | - |
| 77 | May | 2022 | SMEC | DME | 20PHD0249 | Mr. NARGATTI KIRAN ISHWAR | Nargatti K., Ahankari S. | Additive Manufacturing of Supercapacitor Electrodes-Materials, Methods and Design | Key Engineering Materials | SCOPUS | 1013-9826 | - |
| 78 | May | 2022 | CIMR | DDA | 17PHD0028 | ROSHITH P | Roshith P., Arivarasu M. | Improvements on hot corrosion behaviour of HVOF coated CO2laser beam and pulsed gas tungsten arc weldments in 2.5% sulphur gas plus molten salt in industrial waste incinerator environment | Engineering Research Express | SCOPUS | 2631-8695 | - |
| 79 | June | 2022 | SMEC | DAE | 18PHD0213 | PAJARLA SAITEJA | Saiteja P., Ashok B. | Study on interactive effects of CRDi engine operating parameters through RSM based multi-objective optimization technique for biofuel application | Energy | SCOPUS | 0360-5442 | - |
| 80 | June | 2022 | SMEC | DAE | 18PHD0189 18PHD0189 18PHD0213 18PHD0066 19PHD0317 |
Mr. SATHISH KUMAR T Mr. VIGNESH R Mr.PAJARLA SAITEJA Mr. ASHWIN JACOB Mr. KARTHICK C |
Sathish Kumar T., Vignesh R., Ashok B., Saiteja P., Jacob A., Karthick C., Jeevanantham A.K., Senthilkumar M., Muhammad Usman K. | Application of statistical approaches in IC engine calibration to enhance the performance and emission Characteristics: A methodological review | Fuel | SCOPUS | 0016-2361 | - |
| 81 | June | 2022 | SMEC | DTEE | 18PHD0102 | Mr. MADURU VENKATA RAMANA | Ramana Maduru V., Shaik S., Cuce E., Afzal A., Panchal H., Mert Cuce P. | UV coated acrylics as a substitute for generic glazing in buildings of Indian climatic conditions: Prospective for energy savings, CO2 abatement, and visual acceptability | Energy and Buildings | SCOPUS | 0378-7788 | - |
| 82 | June | 2022 | SMEC | DAE | 20PHD0040 | Mr. GOUDILYAN M | Mylsamy G., Krishnasamy P. | A Review on Natural Plant Fiber Epoxy and Polyester Composites–Coating and Performances | Journal of Natural Fibers | WOS | 1544-0479 | 4.507 |
| 83 | June | 2022 | CIMR | DME | 20PHD0037 | Ms. GECIL EVANGELINE T | Gecil Evangeline T., Raja Annamalai A. | Dielectric properties of conventional and microwave sintered Lanthanum doped CaCu3Ti4O12 ceramics for high- frequency applications | Ceramics International | SCOPUS | 0272-8842 | - |
| 84 | June | 2022 | SMEC | DDA | 18PHD0091 | HARIHARAN | Elangovan H(TRA-16068)., Rajamohan V. | Dynamic characterization of tapered composite sandwich plate with honeycomb core: Numerical and experimental investigations | Thin-Walled Structures | SCOPUS | 0263-8231 | - |
| 85 | June | 2022 | CBCMT | DME | 19PHD0419 | PRAVEENKUMAR B | Praveenkumar K(19PHD0419)., Swaroop S., Manivasagam G. | Effect of multiple laser peening on microstructural, fatigue and fretting-wear behaviour of austenitic stainless steel | Surface and Coatings Technology | SCOPUS | 0257-8972 | - |
| 86 | June | 2022 | SMEC | DDA | 19PHD0301 | Mr. MUTHUKUMARAN G | Gunasegeran M (TRA-16766)., Edwin Sudhagar P. | Investigation of free and forced vibration of GFRP corrugated bio-inspired sandwich beam with HSDT: Numerical and experimental study | Mechanics of Advanced Materials and Structures | WOS | 1537-6494 | 3.338 |
| 87 | June | 2022 | SMEC | DME | 18PHD0232 | Mr. QUBERK JEEVA SINGH C | Singh C Q.J., Rajamurugan G. | Importance of WCFC particle on the mechanical and tribological performance of flax/hemp epoxy composite | Particulate Science and Technology | WOS | 0272-6351 | 2.628 |
| 88 | June | 2022 | SMEC | DME | 14PHD0340 | Mr. SHIJO J S | JS S., Behera N. | Prediction of flow mode transition in pneumatic conveying of fine particles using CFD | Particulate Science and Technology | WOS | 0272-6351 | 2.628 |
| 89 | June | 2022 | SMEC | DDA | 17PHD0252 | Mr. RENU KIRAN SHASTRI | Shastri R.K., Mohanty C.P. | A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy | Journal of Materials Engineering and Performance | WOS | 1059-9495 | 2.036 |
| 90 | June | 2022 | SMEC | DDA | 17PHD0143 | Kumar M.N.V.R. | Kumar M.N.V.R.L., Ramakrishnan R. | Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile- Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose | Journal of Materials Engineering and Performance | WOS | 1059-9495 | 2.036 |
| 91 | June | 2022 | SMEC | DME | 17PHD0269 | SURYAWANSHI ABHIJEET SHIVAJI | Suryawanshi A.S(TRA-17PHD0269)., Behera N. | Prediction of abrasive wears behavior of dental composites using an artificial neural network | Computer Methods in Biomechanics and Biomedical Engineering | WOS | 1025-5842 | 1.669 |
| 92 | June | 2022 | SMEC | DME | 19PHD0409 | Mr. RENANGI SANDEEP | Sandeep R., Natarajan A. | Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | WOS | 0954-4062 | 1.758 |
| 93 | June | 2022 | SMEC | DTEE | 20PHD0525 | Mr. HARI VENKIT | Venkit H., Selvaraj S.K. | Review on latest trends in friction-based additive manufacturing techniques | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | WOS | 0954-4062 | 1.758 |
| 95 | June | 2022 | SMEC | DTEE | 16PHD0601 | Mr. Somashekar V | Somashekar V., Immanuel Selwynraj A. | Experimental and numerical study on heatwave effect over an airfoil for unmanned aerial vehicle applications | Aircraft Engineering and Aerospace Technology | WOS | 0002-2667 | 0.975 |
| 96 | June | 2022 | SMEC | DME | 19PHD0255 | UDAY KN SENTHILRAJ K |
Uday K.N., Senthilraj K., Rajamurugan G. | Exfoliation corrosion susceptibility on friction stir welded aluminium 6061/Cr2O3composite | Engineering Research Express | SCOPUS | 2631-8695 | - |
| 97 | June | 2022 | SMEC | DTEE | 14PHD0278 | Mr. NAVEEN KUMAR GAVIRINENI | Gavirineni N.K., Gundabattini E. | Investigation of the Performance of a 660-MW Supercritical Boiler in Terms of NOx Emission and Enhancing the Thermal Efficiency by Optimizing the Air Distribution System |
Journal of The Institution of Engineers (India): Series C | WOS | 2250-0545 | 1.42 |
| 98 | June | 2022 | SMEC | DDA | 17PHD0083 | Mr. LAKSHMI NARAYANAN V | Lakshmi Narayanan V., Ramakrishnan R. | Model-based design optimisation of digital hydraulic pitch actuator for a large-scale wind turbine | International Journal of Ambient Energy | WOS | 0143-0750 | 2.326 |
| 99 | June | 2022 | SMEC | DTEE | 19PHD0418 | Mr. BIBIN B S | BS B., Gundabattini E. | Investigation on the density of Al2O3/R1234yf, TiO2/R1234yf and CuO/R1234yf nano-refrigerants | Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems | WOS | 2397-7914 | 2.263 |
| 100 | July | 2022 | CIMR | DME | 20PHD0289 | Mr. SOMASUNDARAM M | Somasundaram M., Uttamchand N.K., Annamalai A.R., Jen C.-P. | Insights on Spark Plasma Sintering of Magnesium Composites: A Review | Nanomaterials | WOS | 5.719 | |
| 101 | July | 2022 | SMEC | DTEE | 21PHD0152 | PON PAVITHIRAN C K | Kuppusamy P.P., Bhatia A., Verma A., Shah N.R., Pratyush P., Shanmugarajan V., Kim S.C., Poongavanam G.K., Duraisamy S. | Accumulation of biomedical waste during the COVID-19 pandemic: concerns and strategies for effective treatment | Environmental Science and Pollution Research | WOS | 5.190 | |
| 102 | July | 2022 | SMEC | DAE | 20PHD0667 | Mr. PEMMAREDDY SAITEJA | Saiteja P., Ashok B., Wagh A.S., Farrag M.E. | Critical review on optimal regenerative braking control system architecture, calibration parameters and development challenges for EVs | International Journal of Energy Research | WOS | 4.672 | |
| 103 | July | 2022 | SMEC | DTEE | 19PHD0526 | Mr. NANDHAKUMAR E | Eswaramoorthy N., Arulraj A., Mangalaraja R.V., Pitchaiya S., Rajaram K. | Nanoscale interfacial engineering of 1D g- C3 N4 enables effective and thermally stable HTL-free carbon-based perovskite solar cells with aging for 100 hours | International Journal of Energy Research | WOS | 4.672 | |
| 104 | July | 2022 | SMEC | DDA | 17PHD0083 | Valayapathy Lakshmi Narayanan | Arumugam S., Kandasamy J., Venkatesan S., Murugan R., Narayanan V.L., Sultan M.T.H., Shahar F.S., Shah A.U.M., Khan T., Sebaey T.A. | A Review on the Effect of Fabric Reinforcement on Strength Enhancement of Natural Fiber Composites | Materials | WOS | 3.748 | |
| 105 | July | 2022 | SMEC | DTEE | 19PHD0419 | Praveenkumar V | Kumar V.P., Jebaraj A.V. | Attainment of favorable microstructure for residual stress reduction through high-temperature heat treatment on additive manufactured inconel 718 alloy | International Journal of Advanced Manufacturing Technology | WOS | 3.563 | |
| 106 | July | 2022 | SMEC | DDA | 19PHD0061 | Mr. ELANGOVAN T | Thangapandian E., Palanisamy P. | An experimental and numerical study to enhance the thermal characteristics of LA/CuO/Al2O3 nanocomposites as a phase change material for building cooling applications | Polymer Composites | WOS | 3.531 | |
| 107 | July | 2022 | SMEC | DDA | 19PHD0087 | Mr. VENUGOPAL B | Barathan V., Rajamohan V., Haboussi M., Manickam G. | Variable stiffness composite laminated beams - nonlinear free flexural vibration behavior using a sinusoidal based shear flexible structural theory accounting for Poisson's effect | International Journal of Non-Linear Mechanics | WOS | 3.336 | |
| 108 | July | 2022 | SMEC | DME | 17PHD0143 | Kumar M | Kumar M., Ramakrishnan R. | Effect of Fused Filament Fabrication Parameters and Tetrabromobisphenol- A/Microcrystalline Cellulose Additives on the Dynamic Mechanical Behavior of Polycarbonate/Acrylonitrile–Butadiene– Styrene Blends for Precision Structures | Journal of Materials Engineering and Performance | WOS | 2.036 | |
| 109 | July | 2022 | SMEC | DME | 19PHD0142 | Mr. SANTOSH S BAGEWADI | Bagewadi S.S., Sugavaneswaran M., Bhagchandani R.K. | Investigation on Mechanical Properties of Additive Manufactured Hybrid Auxetic Structure | Journal of Materials Engineering and Performance | WOS | 2.036 | |
| 110 | July | 2022 | SMEC | DME | 20PHD0207 | Raja S | Raja S., Rajan A.J. | A Decision-Making Model for Selection of the Suitable FDM Machine Using Fuzzy TOPSIS | Mathematical Problems in Engineering | WOS | 1.430 | |
| 111 | July | 2022 | SMEC | DTEE | 20PHD0617 | Ms. MOULIKA GRANDHI | Moulika G., Ponnusamy P. | 3D printing for ceramic based PLA composites: Development, security, potential and challenges | Journal of Ceramic Processing Research | WOS | 0.636 | |
| 112 | July | 2022 | SMEC | DAE | 16PHD0139 | Mr. PRAVEEN KUMAR M | Moganam P.K., Sathia Seelan D.A. | Deep learning and machine learning neural network approaches for multi class leather texture defect classification and segmentation | Journal of Leather Science and Engineering | SCOPUS | - | |
| 113 | July | 2022 | SMEC | DME | 20PHD0237 | Mr. RAJESHKANNAN R | Rajeshkannan R., Muralidharan B., Pandi Rajasabai S., Naveenkumar R. | Mechanical and thermomechanical characterization of Ni50-x Ti50Cux(x = 2, 5, 10at%) with morphological studies | Materials Today: Proceedings | SCOPUS | - | |
| 114 | July | 2022 | SMEC | DAE | 15PHD0006 | Mr. DINESHKUMAR R | Ravi D., Rajagopal T.K.R. | Numerical Investigation on the Effect of Geometric Shape and Outlet Angle of a Bladeless Fan for Flow Optimization using CFD Techniques | International Journal of Thermofluids | SCOPUS | - | |
| 115 | July | 2022 | SMEC | DDA | 14PHD0089 | Mr. CHANDBADSHAH S B V J | S.B.V.J. C., Mannayee G. | Structural analysis and simulation of solid microneedle array for vaccine delivery applications | Materials Today: Proceedings | SCOPUS | - | |
| 116 | July | 2022 | SMEC | DAE | 16PHD0097 | Mr. K VEERA RAGHAVULU | Raghavulu K.V., Rasu N.G., Jani S.P. | Tribology analysis and the effect of molybdenum disulphide lubricant additive on the performance of VCR system | Advances in Materials and Processing Technologies | SCOPUS | - | |
| 117 | July | 2022 | CIMR | DDA | 17PHD0028 | Mr. ROSHITH P | P R., M A. | Hot corrosion and air oxidation behavior of pulsed current gas tungsten arc welded and CO2 laser beam welded SMO 254 at 800 °C | Welding International | SCOPUS | - | |
| 118 | August | 2022 | SMEC | DME | 20PHD0207 | Raja S | Natrayan L., Kaliappan S., Baskara Sethupathy S., Sekar S., Patil P.P., Raja S., Velmurugan G., Abdeta D.B. | Investigation on Interlaminar Shear Strength and Moisture Absorption Properties of Soybean Oil Reinforced with Aluminium Trihydrate-Filled Polyester- Based Nanocomposites | Journal of Nanomaterials | WOS | 1687-4129 | 3.791 |
| 119 | August | 2022 | SMEC | DAE | 18PHD0066 | ASHWIN JACOB | Oliveira C.Y.B., Jacob A., Nader C., Oliveira C.D.L., Matos Â.P., Araújo E.S., Shabnam N., Ashok B., Gálvez A.O. | An overview on microalgae as renewable resources for meeting sustainable development goals | Journal of Environmental Management | WOS | 0301-4797 | 8.910 |
| 120 | August | 2022 | SMEC | DTEE | 18PHD0102 | MADURU VENKATA RAMANA | Shaik S., Maduru V.R., Kirankumar G., Arıcı M., Ghosh A., Kontoleon K.J., Afzal A. | Space-age energy saving, carbon emission mitigation and color rendering perspective of architectural antique stained glass windows | Energy | WOS | 1873-6785 | 8.857 |
| 121 | August | 2022 | SMEC | DAE | 18PHD0066 | ASHWIN JACOB | Jacob A., Ashok B., Shanthakumar S., Jino L., Karthikeyan A., Kavvampally R., Raja I. | Formulation of optimal bioenergy mixtures from phototrophic and heterotrophic cultures of S. quadricauda and C. pyrenoidosa microalgal strains | Renewable Energy | WOS | 0960-1481 | 8.634 |
| 122 | August | 2022 | SMEC | DDA DDA |
17PHD0022 | SOURABH KUMAR SONI | Soni S.K., Thomas B., Swain A., Roy T. | Functionally graded carbon nanotubes reinforced composite structures: An extensive review | Composite Structures | WOS | 0263-8223 | 6.603 |
| 123 | August | 2022 | SMEC | DME | 16PHD0229 | Chandrasekar V | Chandrasekar V., Ramkumar K.D. | Effect of Nb-free consumables on the microstructure and structural integrity of pressure vessel grades of dissimilar austenitic stainless steel welded joints | Journal of Materials Research and Technology | WOS | 2238-7854 | 6.267 |
| 124 | August | 2022 | SMEC | DDA | 19PHD0374 | BALA MURALI N | Nagarajan B.M., Manoharan M. | Influence of cooling conditions on tensile lap shear strength and microstructure of friction stir welded aluminum alloy 5052- H32 and polycarbonate light weight hybrid joint | Journal of Manufacturing Processes | WOS | 1526-6125 | 5.684 |
| 125 | August | 2022 | CBCMT | DME | 20PHD0950 | UVANARAYANAN C | C U.N., P S.P.A. | Selective laser melting and post- processing stages for enhancing the material behavior of cobalt-chromium alloy in total hip replacement: a review | Materials and Manufacturing Processes | WOS | 1042-6914 | 4.783 |
| 126 | August | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Natrayan L., Kaliappan S., Baskara Sethupathy S., Sekar S., Patil P.P., Raja S., Velmurugan G., Abdeta D.B. | Investigation on Interlaminar Shear Strength and Moisture Absorption Properties of Soybean Oil Reinforced with Aluminium Trihydrate-Filled Polyester- Based Nanocomposites | Journal of Nanomaterials | WOS | 1687-4129 | 3.791 |
| 127 | August | 2022 | SMEC | DDA | 19PHD0134 | TOM SAJU | Saju T., Velu M. | Fracture toughness and fatigue crack growth rate studies on rotary friction weldments of nickel-based superalloys | Materials Letters | WOS | 0167-577X | 3.574 |
| 128 | August | 2022 | SMEC | DDA | 20PHD2088 | ANANDAN B | Anandan B., Manikandan M. | Machine learning approach for predicting the peak temperature of dissimilar AA7050-AA2014A friction stir welding butt joint using various regression models | Materials Letters | WOS | 0167-577X | 3.574 |
| 129 | August | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Subramani R., Kaliappan S., Sekar S., Patil P.P., Usha R., Manasa N., Esakkiraj E.S. | Polymer Filament Process Parameter Optimization with Mechanical Test and Morphology Analysis | Advances in Materials Science and Engineering | WOS | 1687-8434 | 2.098 |
| 130 | August | 2022 | SMEC | DME | 18PHD0277 | A.M.ANUSHREE KIRTHIKA | Kirthika A.M.A., Rao M.N., Manivasagam G. | Duplex aging of metastable beta titanium alloys: A Review | Transactions of the Indian Institute of Metals | WOS | 0975-1645 | 1.391 |
| 131 | August | 2022 | SMEC | DME | 16PHD0655 | SREENIVASULU BEZAWADA | Bezawada S., Gajjela R. | Microstructural and Mechanical Characterization of Welded Joints between Stainless Steel and Hastelloy Made Using Pulsed Current Gas Tungsten Arc Welding | Journal of Materials Engineering and Performance | WOS | 1059-9495 | 2.036 |
| 132 | August | 2022 | SMEC | DDA | 19PHD0086 | PRAVEEN KUMAR D | Praveen Kumar D., Vinoth Jebaraj A. | Role of Volumetric Energy Density and Post-Heat Treatments to Achieve Stable Microstructure on Additive Manufactured Ti6Al4V Alloy | Transactions of the Indian Institute of Metals | WOS | 0975-1645 | 1.391 |
| 133 | September | 2022 | SMEC | DTEE | 20PHD0036 | RUBESH RAJA V | Veeramanikandan M., Arjunan T.V., Gunasekar N., Rubesh Raja V. | Design optimization and experimental evaluation of novel photovoltaic modules in comparison with a conventional photovoltaic module | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | 2.902 | ||
| 134 | September | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Raja S., Logeshwaran J., Venkatasubramanian S., Jayalakshmi M., Rajeswari N., Olaiya N.G., Mammo W.D. | OCHSA: Designing Energy-Efficient Lifetime- Aware Leisure Degree Adaptive Routing Protocol with Optimal Cluster Head Selection for 5G Communication Network Disaster Management | Scientific Programming | 1.672 | ||
| 135 | September | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Subramani R., Kaliappan S., Kumar P.V.A., Sekar S., Poures M.V.D., Patil P.P., Raj E.S.E. | A Recent Trend on Additive Manufacturing Sustainability with Supply Chain Management Concept, Multicriteria Decision Making Techniques | Advances in Materials Science and Engineering | 2.098 | ||
| 136 | September | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Tamil Mannan K., Sivaprakash V., Raja S., Kulandasamy M., Patil P.P., Kaliappan S. | Significance of Si3N4/Lime powder addition on the mechanical properties of natural calotropis gigantea composites | Materials Today: Proceedings | - | ||
| 137 | September | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Tamil Mannan K., Sivaprakash V., Raja S., Patil P.P., Kaliappan S., Socrates S. | Effect of Roselle and biochar reinforced natural fiber composites for construction applications in cryogenic environment | Materials Today: Proceedings | - | ||
| 138 | September | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Raja S., Agrawal A.P., P Patil P., Thimothy P., Capangpangan R.Y., Singhal P., Wotango M.T. | Optimization of 3D Printing Process Parameters of Polylactic Acid Filament Based on the Mechanical Test | International Journal of Chemical Engineering | 2.729 | ||
| 327 | September | 2022 | SMEC | DAE | 18PHD0059 | CHELLIAH.A | Shaik S., Arumugam C., Shaik S.V., Arıcı M., Afzal A., Ma Z. | Strategic design of PCM integrated burnt clay bricks: Potential for cost-cutting measures for air conditioning and carbon dioxide extenuation | Journal of Cleaner Production | WOS | 0959-6526 | 11.072 |
| 328 | September | 2022 | SMEC | DME | 20PHD0249 | NARGATTI KIRAN ISHWAR | Nargatti K.I., Subhedar A.R., Ahankari S.S., Grace A.N., Dufresne A. | Nanocellulose-based aerogel electrodes for supercapacitors: A review | Carbohydrate Polymers | WOS | 0144-8617 | 10.723 |
| 363 | October | 2022 | SMEC | DTEE | 19PHD0526 | NANDHAKUMAR.E | Pitchaiya S., Eswaramoorthy N., Madurai Ramakrishnan V., Natarajan M., Velauthapillai D. | Bio-Inspired Graphitic Carbon-Based Large-Area (10 × 10 cm2) Perovskite Solar Cells: Stability Assessments under Indoor, Outdoor, and Water-Soaked Conditions | ACS Applied Materials and Interfaces | WOS | 1944-8244 | 10.383 |
| 380 | October | 2022 | SMEC | DDA | 17PHD0028 | ROSHITH P | Sivamurugan P., Selvam R., Pandian M., Ashraf M.S., Chakrapani I.S., Thanikasalam A., Roshith P., Ramesh K., Ramesh B. | Extraction of novel biosilica from finger millet husk and its coconut rachilla- reinforced epoxy biocomposite: mechanical, thermal, and hydrophobic behaviour | Biomass Conversion and Biorefinery | WOS | 2190-6823 | 4.050 |
| 385 | October | 2022 | SMEC | DDA | 20PHD0851 | NANDHAKUMAR R | Kiruthiga G., Rajni K.S., Geethanjali N., Raguram T., Nandhakumar E., Senthilkumar N. | SnO2: Investigation of optical, structural, and electrical properties of transparent conductive oxide thin films prepared by nebulized spray pyrolysis for photovoltaic applications | Inorganic Chemistry Communications | WOS | 1387-7003 | 3.428 |
| 441 | November | 2022 | SMEC | DDA | 17PHD0069 | CHAITHANYA VINAY V | Sankar B., Vinay C., Vishnu J., Shankar K.V., Gokul Krishna G.P., Govind V., Jayakrishna A.J. | Focused Review on Cu–Ni–Sn Spinodal Alloys: From Casting to Additive Manufacturing | Metals and Materials International | WOS | 1598-9623 | 3.451 |
| 341 | September | 2022 | SMEC | DME | 19PHD0255 | UDAY KN | Uday K.N., Rajamurugan G. Dhaou I.B. | Influence of tool rotational and transverse speed on friction stir welding of dissimilar aluminum 6061 composites | Materials Letters | WOS | 0167-577X | 3.574 |
| 342 | September | 2022 | SMEC | DDA | 19PHD0087 | VENUGOPAL B | Barathan V., Rajamohan V. | Nonlinear buckling analysis of a sandwich composite semi-ellipsoidal shell under hydrostatic pressure: A numerical and experimental investigation | Mechanics of Advanced Materials and Structures | WOS | 1537-6532 | 3.338 |
| 343 | September | 2022 | SMEC | DTM | 20PHD0541 | PRAGYA THAKUR | Thakur P., Wilson V.H. | Analysis of barriers affecting the adoption of community solar from consumer's perspective: A hybrid ISM-DEMATEL approach | Energy and Environment | WOS | 0958-305X | 3.154 |
| 345 | September | 2022 | SMEC | DTEE | 19PHD0050 | RAKESH C | Chandrashekar R., Kumar B. | Experimental investigation on energy saving potential for thermally activated buildings integrated with the active cooling system | Energy Sources, Part A: Recovery, Utilization and Environmental Effects | WOS | 1556-7230 | 2.902 |
| 346 | September | 2022 | SMEC | DAE | 20PHD0623 | RAJASOZHAPERUMAL | Rajasozhaperumal G., Kannan C. | Influence of Fatty Acid Composition on the Tribological Performance of Methyl Esters Under Boundary Lubrication Regime | Arabian Journal for Science and Engineering | WOS | 2191-4281 | 2.807 |
| 347 | September | 2022 | SMEC | DME | 20PHD0289 | SOMASUNDARAM M | Somasundaram M., NarendraKumar U. | Microstructural and Mechanical Properties of a Heat-Treated EV31A Magnesium Alloy Fabricated Using the Stir-Casting Process | Crystals | WOS | 2073-4352 | 2.670 |
| 348 | September | 2022 | SMEC | DDA | 20PHD0715 | ADARSH MATHEW ABRAHAM | Abraham A.M., Venkatesan S. | A review on application of biomaterials for medical and dental implants | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 2041-3076 | 2.663 |
| 352 | September | 2022 | SMEC | DME | 20PHD0207 | S RAJA | Raja S., John Rajan A., Praveen Kumar V., Rajeswari N., Girija M., Modak S., Vinoth Kumar R., Mammo W.D. | Selection of Additive Manufacturing Machine Using Analytical Hierarchy Process | Scientific Programming | WOS | 1875-919X | 1.672 |
| 354 | September | 2022 | SMEC | DAE | 19PHD0135 | JAYARAMAN | Thangamani J., Krishnasamy P. | Coated Natural Fiber Reinforced Hybrid Composite: Mechanical, Thermal, and Acoustic Performances | Transactions of the Indian Institute of Metals | WOS | 0972-2815 | 1.391 |
| 355 | September | 2022 | SMEC | DDA | 16PHD0138 | ANAND RAJ R | Rajasekharan Unnithan A.R., Subramaniam S. | Enhancing Ride Comfort and Stability of a Large Van Using an Improved Semi-active Stability Augmentation System | SAE International Journal of Vehicle Dynamics, Stability, and NVH | SCOPUS | 2380-2170 | - |
| 361 | October | 2022 | CO2 | DAE | 21PHD0297 | ANANDA MURUGAN M | Sasidhar K.B., Somasundaram M., Ekambaram P., Arumugam S.K., Nataraj G., Murugan M.A. | A critical review on the effects of pneumatic mixing in anaerobic digestion process | Journal of Cleaner Production | WOS | 0959-6526 | 11.072 |
| 363 | October | 2022 | SMEC | DAE | 20PHD0522 | ELUMALAI R | Elumalai R., Ravi K. | Strategy to reduce carbon emissions by adopting ammonia–Algal biodiesel in RCCI engine and optimize the fuel concoction using RSM methodology | International Journal of Hydrogen Energy | WOS | 0360-3199 | 7.139 |
| 364 | October | 2022 | SMEC | DME | 20PHD0037 | GECIL EVANGELINE T | Gecil Evangeline T., Annamalai A.R., Magdaline T.B. | Modern Synthesis and Sintering Techniques of Calcium Copper Titanium Oxide (CaCu3Ti4O12) Ceramics and Its Current Trend in Prospective Applications: A Mini-Review | Nanomaterials | WOS | 2079-4991 | 5.719 |
| 365 | October | 2022 | SMEC | DTEE | 20PHD0356 | A VISHNU PRIYA | Priya A.V., Shaik S. | Crystal mud transparent slime as a glazing material for net-zero energy buildings: Enhanced energy savings, diurnal lighting, and CO2 mitigation | Energy for Sustainable Development | WOS | 0973-0826 | 5.655 |
| 369 | October | 2022 | SMEC | DME | 21PHD0243 | SAKTHI BALAN G | Sakthi Balan G., Aravind Raj S. | A review on Shock tubes with multitudinous applications | International Journal of Impact Engineering | WOS | 0734-743X | 4.592 |
| 371 | October | 2022 | SMEC | DDA | 20PHD0478 | UMANATH P | Puthillam U., Ravoor J., Elsen Selvam R., Karuppan D., Bakthavachalam B., Aseer J.R. | Physical, mechanical, and biological characterization of robocasted carbon nanotube reinforced microwave sintered calcium phosphate scaffolds for bone tissue engineering | Journal of the Mechanical Behavior of Biomedical Materials | WOS | 1751-6161 | 4.042 |
| 372 | October | 2022 | CIMR | DME | 21PHD0188 | MUKKA SRIKANTH | Srikanth M., Annamalai A.R., Muthuchamy A. | Medium heavy alloy fabrication with ultrafine grain and high performance via spark plasma sintering | Materials Letters | WOS | 0167-577X | 3.574 |
| 374 | October | 2022 | SMEC | DDA | 19PHD0301 | MUTHUKUMARAN G | Gunasegeran M., Sudhagar P.E. | Evaluation, optimization and prediction of the transverse shear modulus of biomimetic 3D printed sandwich core | Mechanics of Advanced Materials and Structures | WOS | 1537-6494 | 3.338 |
| 375 | October | 2022 | SMEC | DDA | 18PHD0040 | ABHIJEET BHUPAL VANTE | Vante A.B., Kanish T.C. | Experimental investigation on digital offset switching strategy for precise dosing using digital multiple micropump infusion system | Microfluidics and Nanofluidics | WOS | 2411-5134 | 3.090 |
| 376 | October | 2022 | SMEC | DME | 19PHD0207 | THIYAGU C | Thiyagu C., NarendraKumar U. | Effect of graphene on thermal, mechanical, and shape memory properties of polyurethane nanocomposite | Applied Physics A: Materials Science and Processing | WOS | 0947-8396 | 2.983 |
| 377 | October | 2022 | SMEC | DME | 18PHD0232 | QUBERK JEEVA SINGH C | Singh Q.J., Rajamurugan G. | Experimental study on abrasive water jet machining of WCFC reinforced flax/wire mesh/hemp composite | Journal of Industrial Textiles | WOS | 1528-0837 | 2.926 |
| 378 | October | 2022 | SMEC | DME | 20PHD0289 | SOMASUNDARAM M | Somasundaram M., NarendraKumar U. | Electrochemical corrosion behaviour of stir cast and heat-treated EV31A magnesium alloy in different electrolytic mediums | Journal of Applied Electrochemistry | WOS | 0021-891X | 2.925 |
| 380 | October | 2022 | SMEC | DDA | 19PHD0134 | TOM SAJU | Saju T., Velu M. | Experimental studies of fracture and fatigue crack growth in dissimilar metal welded joints of nickel-based superalloys: Cracks oriented along the weld | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 2041-3076 | 2.663 |
| 382 | October | 2022 | SMEC | DDA | 17PHD0022 | SOURABH KUMAR SONI | Chandra S., Amulani A., Thomas S.B., Soni S.K., Thomas B. | Influence of CNT volume fractions on static and dynamic behavior of aluminum honeycomb-cored carbon-fiber- reinforced honeycomb sandwich structure | Journal of the Brazilian Society of Mechanical Sciences and Engineering | WOS | 1678-5878 | 2.361 |
| 384 | October | 2022 | SMEC | DME | 16PHD0149 | CHAITHANYA KALANGI | Kalangi C., Bolleddu V. | Influence of Carbon Nanotubes on Enhancement of Sliding Wear Resistance of Plasma-Sprayed Yttria-Stabilised Zirconia Coatings | Advances in Materials Science and Engineering | WOS | 1687-8442 | 2.098 |
| 386 | October | 2022 | CIMR | DDA | 17PHD0013 | CALVIN SAMUEL S | Samuel S.C., Arivarasu M., Prabhu T.R. | High-Temperature Solid Particle Erosion Behavior of Laser Powder Bed Fused Inconel 718 | Journal of Tribology | WOS | 1528-8897 | 1.891 |
| 389 | October | 2022 | SMEC | DME | 16PHD0511 | VENKATESH KANNAN M | Venkateshkannan M., Arivazhagan N., Nageswara Rao M., Madhusudhan Reddy G. | Characterization of weld joints produced by continuous wave and double pulse gas metal arc welding in naval grade high- strength low-alloy steel | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | WOS | 2041-3009 | 1.822 |
| 390 | October | 2022 | SMEC | DME | 19PHD0424 | BHARATHI P | Bharathi P., Sampath kumar T. | Latest research and developments of ceramic reinforced magnesium matrix composites—A comprehensive review | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | WOS | 2041-3009 | 1.822 |
| 393 | October | 2022 | SMEC | DDA | 20PHD2064 | VINAYAK HIREMATH S | Hiremath V.S., Reddy D.M. | Effect of ply orientation and laminate thickness on carbon fibre reinforced polymers under low-velocity impact [Einfluss der Gewebeorientierung und Laminatdicke auf kohlenstofffaserverstärkte Polymere unter Stoßbeanspruchung mit niedriger Geschwindigkeit] | Materialwissenschaft und Werkstofftechnik | WOS | 1521-4052 | 1.034 |
| 394 | October | 2022 | SMEC | DTEE | 19PHD0380 | VENKATA RAMANAN S | Srinivasan V., Palanisamy P. | Carbon Nanotubes: An Optimistic Nanomaterial with Superfluity Characteristics in Drug Delivery for the Treatment of Arthritis | Indian Journal of Pharmaceutical Education and Research | WOS | 0019-5464 | 0.843 |
| 395 | October | 2022 | SMEC | DDA | 16PHD0138 | ANAND RAJ R | Rajasekharan Unnithan A.R., Subramaniam S. | Performance Enhancement of Semi- active Continuous Skyhook Control Using Chaotic Map Particle Swarm Optimization-Based Stability Augmentation System | SAE International Journal of Passenger Vehicle Systems | SCOPUS | 2770-3479 | - |
| 397 | October | 2022 | SMEC | DDA | 19PHD0258 | ANWARSHA. A | Anwarsha A., Babu T.N. | Recent advancements of signal processing and artificial intelligence in the fault detection of rolling element bearings: a review | Journal of Vibroengineering | SCOPUS | 1392-8716 | - |
| 398 | October | 2022 | SMEC | DDA | 16PHD0525 | NARAYANA MOORTHY N | Narayana Moorthy N., Kanish T.C. | Fault detection and identification in friction drilling process | Jurnal Tribologi | SCOPUS | 2289-7232 | - |
| 401 | October | 2022 | SMEC | DDA | 20PHD0588 | T.MURALI | Venkatesan K., Devendiran S., Murali T. | A hybrid algorithm for multi-objective optimisation of parameters nanofluid in MQL-turning of Inconel X-750 | Advances in Materials and Processing Technologies | SCOPUS | 2374-068X | - |
| 403 | October | 2022 | SMEC | DTEE | 18PHD0102 | MADURU VENKATA RAMANA | Maduru V.R., Shaik S., Cuce E., Kirankumar G., Chelliah A., Afzal A., Mohanty C.P. | Analysis of effective parameters of building’s glazing on energy savings and carbon emission mitigation prospective | International Journal of Ambient Energy | SCOPUS | 2162-8246 | - |
| 411 | November | 2022 | SMEC | DAE | 18PHD0066 | ASHWIN JACOB | Jacob A., Ashok B., Lawrence J., Soosairaj A.S., Anandan J., Elango M. | Exploring the potential of third- generation microalgae bio-alcohol and biodiesel in arresting particulate smoke emissions and greenhouse gases using CART | Environmental Science and Pollution Research | WOS | 1614-749 | 5.190 |
| 415 | November | 2022 | SMEC | DME | 20PHD0201 | HARIBASKAR R | Haribaskar R., Kumar T.S., Tamiloli N. | Surface Integrity of additively manufactured Inconel-718 by peening approaches | Materials and Manufacturing Processes | WOS | 1042-6914 | 4.783 |
| 416 | November | 2022 | SMEC | DDA | 19PHD0178 | SUREKHA.G | Gnanasekar S., Rajamohan V. | Numerical and Experimental Investigations on Nonlinear Buckling Response of a Laminated Composite Shell | International Journal of Applied Mechanics | WOS | 1758-8251 | 3.951 |
| 417 | November | 2022 | SMEC | DME | 20PHD0525 | HARI VENKIT | Venkit H., Selvaraj S.K. | Novel Technique for Design and Manufacture of Alternating Gradient Composite Structure of Aluminum Alloys Using Solid State Additive Manufacturing Technique | Materials | WOS | 1996-1944 | 3.748 |
| 419 | November | 2022 | SMEC | DME | 19PHD0207 | THIYAGU C | Thiyagu C., NarendraKumar U. | Effect of ammonium polyphosphate on fire-retardant, mechanical, and vibrational analysis of epoxy/glass/ramie hybrid composite | Polymer Composites | WOS | 0272-8397 | 3.531 |
| 423 | November | 2022 | SMEC | DME | 19PHD0428 | ADARSH S J | Adarsh S.J., Natarajan A. | Analysis and prediction of the joint strength of friction stir welded Aluminium 5754 to polyamide using response surface methodology and artificial neural network | Journal of Thermoplastic Composite Materials | WOS | 0892-7057 | 3.027 |
| 424 | November | 2022 | SMEC | DDA | 20PHD0182 | D RAMAKRISHNA | Ramakrishna D., Bala Murali G. | Bio-inspired 3D-printed lattice structures for energy absorption applications: A review | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 1464-4207 | 2.663 |
| 428 | November | 2022 | SMEC | DME | 17PHD0260 | AKASH VIJAYKUMAR BIRADAR | Biradar A., Rijesh M. | Surface roughness–the key for roll bonding aluminium | Materials Science and Technology (United Kingdom) | WOS | 0267-0836 | 2.060 |
| 429 | November | 2022 | SMEC | DME | 19PHD0409 | RENANGI SANDEEP | Sandeep R., Arivazhagan N. | Impact of Pin Length on Joint Strength of Friction Lap Welded Aluminum Alloy 7475 and Polyphenylene Sulfide Thermoplastic Polymer Joints | Journal of Materials Engineering and Performance | WOS | 1059-9495 | 2.036 |
| 431 | November | 2022 | SMEC | DME | 17PHD0137 | JITENDRA SATPUTE | Satpute J., Rajan J. | ANALYSIS OF ENERGY, EXERGY, ENVIRONMENTAL, AND ECONOMICS (4E) ON PHOTOVOLTAIC-THERMAL COLLECTOR SYSTEM | Thermal Science | WOS | 0354-9836 | 1.971 |
| 432 | November | 2022 | SMEC | DDA | 19PHD0457 | PREM KUMAR M | Prem Kumar M., Manikandan M. | Investigation of corrosion behaviour on Ni–Cr–Co and Ni–Cr–Mo alloys exposed to molten salt for thermal energy storage applications | Corrosion Engineering Science and Technology | WOS | 1478-422X | 1.971 |
| 436 | November | 2022 | ARC | DAE | 14PHD0127 | SHERIN SAM JOSE J | Jose S.S., Chidambaram R.K. | Electric Vehicle Air Conditioning System and Its Optimization for Extended Range—A Review | World Electric Vehicle Journal | SCOPUS | 2032-6653 | - |
| 438 | November | 2022 | SMEC | DME | 21PHD0243 | SAKTHI BALAN G | Sakthi Balan G., Prakash B., Aravind Raj S., Karthik S., Mohan Kumar V. | Analysis on the impact of recycled ceramic waste, fiber format, and manufacturing techniques on polymer composite properties | Engineering Research Express | SCOPUS | 2631-8695 | - |
| 439 | November | 2022 | SMEC | DME | 11PHD0120 | BHANAGE AMOL SADASHIV | Bhanage A., Padmanabhan K. | Quasi-Static and Fatigue Reliability Analysis of C45 Automotive Leaf Spring Beam Under Flexural Loads in Sub-Zero Temperature | Journal of Failure Analysis and Prevention | SCOPUS | 1864-1245 | - |
| 440 | November | 2022 | SMEC | DAE | 11PHD0071 | JAYA GOPAL S | Subramanian J., Ekambaram P., Arumugam S.K. | Investigation on combustion and emission characteristics of hydrogen- enriched dual-fuel engine operated under waste frying oil biodiesel | Heat Transfer | SCOPUS | 2688-4534 | - |
| 441 | November | 2022 | SMEC | DAE | 19PHD0135 | JAYARAMAN | Krishnasamy P., Arvinda Pandian C.K., Rajamurugan G., Jayaraman T., Maniyambath A., Kesav Chandran J. | Dynamic mechanical behavior of mono/synthetic-natural fiber composites—a review | Engineering Research Express | SCOPUS | 2631-8695 | - |
| 443 | November | 2022 | SMEC | DTEE | 16PHD0493 | ABDUL HAKEEM JAVEED V M | Javeed A., John B. | An experimental study on tribofilm formation and endurance with nanolubricants | Tribology - Materials, Surfaces and Interfaces | SCOPUS | 1751-584X | - |
| 444 | December | 2022 | SMEC | DAE | 15PHD0006 | DINESH KUMAR R | Yarasai S.S., Ravi D., Yoganand S., Raj Rajagopal T.K. | Numerical investigation on the performance and combustion characteristics of a cavity based scramjet combustor with novel strut injectors | International Journal of Hydrogen Energy | WOS | 0360-3199 | 7.139 |
| 445 | December | 2022 | SMEC | DTEE | 16PHD0627 | KURIAN JORY | Jory K., Satheesh A. | Marangoni convection in shallow annular pools of silicone oil heated from above | Case Studies in Thermal Engineering | WOS | 2214-157X | 6.268 |
| 449 | December | 2022 | CO2 | DTEE | 20PHD0914 | KARTHIKEYAN B | Bhuvaneshwaran K., Govindasamy P.K. | Technical assessment of novel organic Rankine cycle driven cascade refrigeration system using environmental friendly refrigerants: 4E and optimization approaches | Environmental Science and Pollution Research | WOS | 1614-7499 | 5.19 |
| 452 | December | 2022 | SMEC | DTEE | 21PHD0152 | PON PAVITHIRAN C K | Pavithiran C.K.P., Sakthivadivel D., Kumar G.P., John B., Jaganathan V.M., Iniyan S. | Energy analysis and carbon dioxide mitigation potential of biomass-driven combined power, cooling, and cooking systems for rural applications | Biomass Conversion and Biorefinery | WOS | 2190-6823 | 4.05 |
| 453 | December | 2022 | SMEC | DTEE | 19PHD0329 | NIVASH | Nivash V., Sakthivadivel D. | Characterization and thermo-chemical conversion of invasive biomass by varying gasifying agents for hydrogen rich producer gas using ASPEN Plus | Biomass Conversion and Biorefinery | WOS | 2190-6823 | 4.05 |
| 454 | December | 2022 | SMEC | DDA | 20PHD0133 | ARUNPRAKASH R | Arunprakash R., Manikandan M., Meshram S.D. | Development of Multipass Gas Tungsten Arc Welding Technique for Aerospace Grade 18% Ni-Co-Mo Based Maraging Steel to Improve the Metallurgical and Mechanical Properties by Reducing Austenite Pools | Journal of Manufacturing Science and Engineering | WOS | 1087-1357 | 3.952 |
| 456 | December | 2022 | SMEC | DTEE | 14PHD0278 | NAVEEN KUMAR GAVIRINENI | Kumar G.N., Gundabattini E. | Investigation of Supercritical Power Plant Boiler Combustion Process Optimization through CFD and Genetic Algorithm Methods | Energies | WOS | 1996-1073 | 3.252 |
| 459 | December | 2022 | SMEC | DME | 20PHD0237 | RAJESHKANNAN R | Radhamani R., Balakrishnan M. | The effect of copper on phase transformation, microstructure and mechanical characterization of Ni50- xTi50Cux shape-memory alloy | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 2041-3076 | 2.663 |
| 463 | December | 2022 | CIMR | DDA | 16PHD0552 | REBIN SANFORD B | Muthu S.M., Arivarasu M., Sanford B.R., Dinakaran V., Gupta S. | Microstructure and hot corrosion characteristics evaluation of high-velocity oxy-fuel sprayed Ni–20%Cr coating on AISI 321 steel with Na2SO4–60%V2O5 salt deposits | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | WOS | 2041-3009 | 1.822 |
| 464 | December | 2022 | SMEC | DDA | 17PHD0269 | SURYAWANSHI ABHIJEET SHIVAJI | Gupta A., Mohan I., Jude R.R., Suryawanshi A., Behera N. | Investigation of stress and tribological properties of dental composite materials using FEM | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | WOS | 2041-305X | 1.818 |
| 465 | December | 2022 | SMEC | DDA | 16PHD0021 | K BABU RAO | Babu Rao K., Reddy D.M. | Fault diagnosis in rotors using adaptive neuro-fuzzy inference systems | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | WOS | 2041-2983 | 1.758 |
| 467 | December | 2022 | SMEC | DME | 17PHD0245 | PRASHANT SAMPATRAO JADHAV | Jadhav P.S., Mohanty C.P. | Comparative analysis of indirect, direct, and hybrid cryogenic machining of Nimonic C-263 superalloy | Journal of Engineering Research (Kuwait) | WOS | 2307-1877 | 1.325 |
| 472 | December | 2022 | SMEC | DTEE | 21PHD0167 | DHAYANITHI J | Dhayanithi J., Gupta M.K., Hotta T.K., Das T. | Numerical investigations on the testing and selection of different phase change materials for peak load reduction in buildings of Indian climates | Materials Today: Proceedings | SCOPUS | 2214-7853 | - |
| 473 | December | 2022 | SMEC | DDA | 20PHD0969 | DINESH KUMAR P K | Bheda T., Joshi D., Dinesh Kumar P.K., Darius Gnanaraj S. | Modeling and Simulation of Brake Disc Using Lightweight Materials | Journal of The Institution of Engineers (India): Series D | SCOPUS | 2250-2130 | - |
| 474 | December | 2022 | SMEC | DME | 11PHD0120 | BHANAGE AMOL SADASHIV | Bhanage A., Padmanabhan K. | Quasi-Static and Fatigue Reliability of Glass/Epoxy Composite Automotive Leaf Spring Beams Under Flexural Loads at Sub-Zero Temperatures | Journal of Failure Analysis and Prevention | SCOPUS | 1864-1245 | - |
| 477 | December | 2022 | SMEC | DDA | 19PHD0537 | MAHENDRAN T | Thangavel M., Elsen Selvam R. | Review of Physical, Mechanical, and Biological Characteristics of 3D-Printed Bioceramic Scaffolds for Bone Tissue Engineering Applications | ACS Biomaterials Science and Engineering | WOS | 2373-9878 | 5.395 |
| 478 | December | 2022 | SMEC | DDA | 19PHD0301 | MUTHUKUMARAN G | Ganapathy V., Muthukumaran G., Sudhagar P.E., Rashedi A., Norrrahim M.N.F., Ilyas R.A., Goh K.L., Jawaid M., Naveen J. | Mechanical properties of cellulose-based multiscale composites: A review | Polymer Composites | WOS | 0272-8397 | 3.531 |
| 479 | December | 2022 | SMEC | DTM | 20PHD2079 | SELVARAJ B | Balachandran S., Swaminathan J. | Advances in Indoor Cooking Using Solar Energy with Phase Change Material Storage Systems | Energies | WOS | 1996-1073 | 3.252 |
| 480 | December | 2022 | SMEC | DDA | 19PHD0190 | BIBIN JOSE | Jose B., Manoharan M., Natarajan A., Muktinutalapati N.R., Madhusudhan Reddy G., Meshram S.D. | Current research and developments in welding of 18% nickel maraging steel | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 2041-3076 | 2.663 |
| 481 | December | 2022 | SMEC | DME | 19PHD0407 | SHIVA KUMAR G N | ShivaKumar G.N., Rajamurugan G. | Understanding the effect of particle reinforcement on friction stir weldment: A review | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 2041-3076 | 2.663 |
| 482 | December | 2022 | SMEC | DDA | 20PHD0134 | GOUTHAMRAJ KANAPAKALA | Kanapaakala G., Subramani V. | A review on β-Ti alloys for biomedical applications: The influence of alloy composition and thermomechanical processing on mechanical properties, phase composition, and microstructure | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | WOS | 2041-3076 | 2.663 |
| 484 | December | 2022 | SMEC | DME | 18PHD0054 | CHANDRASEKAR P | Saicharan K., Sai M.K., Chandrasekhar P., Gopinath A., Selvaraj S.K. | A concise approach to designing an intelligent welding station system platform | International Journal on Interactive Design and Manufacturing | SCOPUS | 1955-2513 | - |