Sorry, you need to enable JavaScript to visit this website.

School of Chemical Engineering (SCHEME)

Publications

2018

  • Simha P, Lalander C, Ramanathan A, Vijayalakshmi C, McConville JR, Vinnerås B, Ganesapillai M. What do consumers think about recycling human urine as fertiliser? Water Res., 15;143:527-538, 2018.
  • Dipesh S. Patle, Davide Manca, Salman Nazir, Swapnil Sharma, Operator training simulators in virtual reality environment for process operators: a review. Virtual Reality, doi.org/10.1007/s10055-018-0354-3, 2018.
  • Aafaq urRehman Jin, Woong Baek Eldon, R. Rene, NataliaSergienko, Shishir Kumar Behera, Hung-Suck Park, Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal, Process Saf Environ., 118; 384-396, 2018.
  • Ansari A.R., Hussain S., Imran M., Al-Ghamdi A.A., Chandan M.R., Optical investigations of microwave induced synthesis of zinc oxide thin-film, Materials Science-Poland, 36 (2): 304-309:2018.
  • Patle D.S., Gadhamsetti A.P., Sharma S., Agrawal V., Rangaiah G.P., Plantwide Control of the Formic Acid Production Process Using an Integrated Framework of Simulation and Heuristics., Ind. Eng. Chem. Res. 57: 40; 13478-13489;  2018.
  • Babu Ponnusami A., Kumar S., Bansal P., Biosorption and kinetic studies of Malachite Green (MG) dye removal from aqueous solution using a low-cost adsorbent prepared from male palm tree flower (Borassus flabellifer). Desalination and water treatment, 121:219-232; 2018.
  • Krutika Patidara , Rituparna Roya , Sampatt Kumara , Gnanasundaram Nirmala, Thanapalan Murugesanb., Experimental investigation of Sterculia foetida and Moringa oleifera as a coagulant for water and wastewater treatment. Desalination and water treatment, 122;254–259; 2018.
  • K. Rambabu, S. Gokula, A.S. Russel, Akella Sivaramakrishna, Babu Ponnusami , Fawzi Banat., Lithium perchlorate modified nanoporous polyethersulfone membranes for improved dye rejection. Desalination and water treatment, 122; 146–157; 2018.
  • Dharmendra Kumar Bal, Jaykumar B. Bhasarkar, Mechanistic investigation of Sono Phosphotungstic acid/phase transfer agent assisted oxidative desulfurization of liquid fuel. Asia-Pac. J. Chem. Eng., e2271; 2018.
  • Swapnil Sharma, Dipesh S. Patle, Akhil Premkumar Gadhamsetti, Sanket Pandit, Davide Manca, G S Nirmala., Intensification and performance assessment of the formic acid production process through a dividing wall reactive distillation column with vapor recompression. Chem. Eng. and Proces., 123; 204-213; 2018.
  • A. Sankar Vinayaka, Biswanath Mahanty, Eldon R. Rene & Shishir Kumar Behera, Biodiesel production by transesterification of a mixture of pongamia and neem oils. Biofuels; DOI: 10.1080/17597269.2018.1464874; 2018.
  • S. Nachiappan, P. Senthil Kumar, K.P. Gopinath, V. Rajinikanth, R. Baskaran, A. Babu Ponnusami, “Intensified degradation of pharmaceutical effluents by novel aerobic iron-swarf activated molecular oxygen in the presence of ascorbic acid”, Desalination and Water Treatment, 102; 273–279;2018. .
  • K. Nagamalleswara Rao and A. Babu Ponnusami, “Design of high pressure vessels using Aspen HYSYS blowdown analysis”, Int. J. Environment and Waste Management, 22; 2018.
  • K. Nagamalleswara Rao and A. Babu Ponnusami, “simulation studies on natural gas sweetening using piperazine amine”, Petroleum and Coal, 60(4): 632-640, 2018.
  • Aabid Hussain Shaik, Mohammed Rehaan Chandan, Preparation of stable copper nanostructures and their direct phase transfer using mercaptosuccinic acid, Physicochem. Eng.; 550(5); 46-55; 2018.
  • Sagadevan Velu, Krishnamoorthy Rambabu, Purushothaman Monash, Chandan Sharma, Improved hydrophilic property of PES/PEG/MnCO3 blended membranes for synthetic dye separation, Int. J. Environ. Studies;75 (4); 592-604; 2018.
  • Mohammed R. Chandan,  Nilanjon Naskar, Anuja Das , Rabibrata Mukherjee , G. Harikrishnan, Deducing Multiple Interfacial Dynamics during Polymeric Foaming,  Langmuir, 34( 27); 8024-8030; 2018.
  • Mohd Imran, Akhalakur Rahman Ansari, Aabid Hussain Shaik, Abdulaziz, Shahir Hussain, Afzal Khan and Mohammed Rehaan Chandan, Ferrofluid synthesis using oleic acid coated Fe3O4nanoparticles dispersed in mineral oil for heat transfer applications, Materials Research Express, 5(3); 36108;2018.
  • Akhalakur Rahman Ansari, Mohd Imran, I.S. Yahia, Mohamed Shaaban Abdel-Wahab, Ahmed Alshahrie, Afzal Husain Khan, Chandan Sharma, Effect of microwave power on morphology of AgO thin film grown using microwave plasma CVD. Int. J. Sur. Sci. Eng., 12 (1); 1-12; 2018.
  • Mohammed Javed, Aabid Hussain Shaik, Tasmeem Ahmad Khan, Mohd Imran, Abdul Aziz, Akhalakur Rahman Ansari, Mohammed Rehaan Chandan, Synthesis of stable waste palm oil based CuO nanofluid for heat transfer applications, Heat and Mass Transfer, 54; 3739–3745; 2018.
  • Mohd Imran, Aabid Hussain Shaik, Akhalakur Rahman Ansari, Abdul Aziz, Shahir Hussain, Ahmed Farag Fadil Abouatiaa, Afzal Khan, Mohammed Rehaan Chandan. Synthesis of highly stable γ-Fe2O3 ferro-fluid dispersed in liquid paraffin, motor oil and sunflower oil for heat transfer applications, RSC Advances, 8;13970-13975; 2018.
  • Hirra Anjum, Khairiraihanna Johari, Nirmala Gnanasundaram, Magesh Ganesapillai, Appusamy Arunagiri, Iyyaswami Regupathi, Murugesan Thanabalan, A review on adsorptive removal of oil pollutants (BTEX) from wastewater using carbon nanotubes., J. Mol. Liq., doi.org/10.1016/j.molliq.2018.10.105; 2018
  • P.Simha, Anastasia Zabioutou, M. Ganesapillai. Continuous urea-nitrogen recycling from human urine: a step towards creating a human excreta based bio-economy. J. Clean. Prod., 172; 4152-4161; 2018.
  • Aditya M. Kashyap, Anand V.P. Gurumoorthy, Pushpavanam Subramaniamb, Symmetric and asymmetric coupled autocatalytic reactions in an isothermal CSTR, Chem.Eng. J., 337( 1) ; 642-653; 2018.
  • Siddharth Gumber, Anand V.P.Gurumoorthy, Methanol Economy Versus Hydrogen Economy.,  Methanol: Science and Engineering, 25; 661-674; 2018.

2017

  • N. F. Ishak, N. A. Hashim, M. H. D. Othman, P. Monash, and F. M. Zuki, “Recent progress in the hydrophilic modification of alumina membranes for protein separation and purification,” Ceram. Int., vol. 43, no. 1, pp. 915–925, 2017.
  • P. Simha, C. Lalander, B. Vinnerås, and M. Ganesapillai, “Farmer attitudes and perceptions to the re–use of fertiliser products from resource–oriented sanitation systems – The case of Vellore, South India,” Sci. Total Environ., vol. 581–582, pp. 885–896, 2017.
  • M. M. Bello, A. A. Abdul Raman, and M. Purushothaman, “Applications of fluidized bed reactors in wastewater treatment – A review of the major design and operational parameters,” J. Clean. Prod., vol. 141, pp. 1492–1514, 2017.
  • G. Koteswara Reddy, K. Nagamalleswara Rao, and K. Yarrakula, “Insights into structure and function of 30S Ribosomal Protein S2 (30S2) in Chlamydophila pneumoniae: A potent target of pneumonia,” Comput. Biol. Chem., vol. 66, pp. 11–20, 2017.
  • P. Simha, A. Zabaniotou, and M. Ganesapillai, “Continuous urea-nitrogen recycling from human urine: A step towards creating a human excreta based bio-economy,” J. Clean. Prod., pp. 1–10, 2017
  • P. Simha and M. Ganesapillai, “Ecological Sanitation and nutrient recovery from human urine: How far have we come? A review,” Sustain. Environ. Res., vol. 27, no. 3, pp. 107–116, 2017.
  • S. Velu, G. Arthanareeswaran and Harshad Lade “Removal of Organic and Inorganic Substances from Industry Wastewater Using Modified Aluminosilicate-Based Polyethersulfone Ultrafiltration Membranes, AICHE, Environmental Progress and Sustainable Energy, DOI 10.1002, 2017
  • A. A. M, T. Sekar, and T. Pathak, “Study on production of Ultra low sulfur diesel fuel by Non- Hydrodesulfurization integrated with Bio-desulphurization process,”Periodica Polytechnica Chemical Engineering, vol. 70, no. 4, pp. 11–15, 2017.
  • N. Gnanasundaram, A. Venugopal, Y. Katragadda, and G. Ullas, “Effect of Inventory Change in a Liquid – Solid Circulating Fluidized Bed (LSCFB),” Chem. Prod. Process Model., pp. 1–9, 2017.
  • M. Mathew and L. Muruganandam, “Pyrolysis of Agricultural Biomass using an Auger Reactor: A Parametric Optimization,” Int. J. Chem. React. Eng., vol. 15, no. 3, 2017.
  • N. Gnanasundaram, A. Venugopal, G. Ullas, and Y. Katragadda, “Effect of liquid viscosity and solid inventory on hydrodynamics in a liquid - solid circulating fluidized bed,” J. Appl. Fluid Mech., vol. 10, no. 1, pp. 267–274, 2017.
  • K. Nagamalleswara Rao, “Optimization and Retrofit studies for Naphthalene Production Process”, Petroleum and Coal, vol. 59, no. 3, pp. 265–272, 2017
  • K. Nagamalleswara Rao, “Sustainable Production of Drying Oil using ASPEN PLUS”, Emerging Trends in Chemical Engineering , vol. 4, no. 1, pp. 15-20, 2017
  • K. Nagamalleswara Rao and Juma Haydary “Storage Tank Protection using ASPEN HYSYS”, Petroleum and Coal , vol. 59, no. 4, pp. 533-542, 2017

2016

  • P. Simha, M. Mathew, and M. Ganesapillai, “Empirical modeling of drying kinetics and microwave assisted extraction of bioactive compounds from Adathoda vasica and Cymbopogon citratus,” Alexandria Eng. J., vol. 55, no. 1, pp. 141–150, 2016.
  • M. Ganesapillai, P. Simha, S. S. Beknalkar, and D. M. R. Sekhar, “Low-grade rock phosphate enriched human urine as novel fertilizer for sustaining and improving agricultural productivity of Cicer arietinum,” Sustain. Prod. Consum., vol. 6, no. December 2015, pp. 62–66, 2016.
  • M. Ganesapillai, P. Simha, K. Gupta, and M. Jayan, “Nutrient Recovery and Recycling from Human Urine: A Circular Perspective on Sanitation and Food Security,” Procedia Eng., vol. 148, pp. 346–353, 2016.
  • P. Simha, P. Banwasi, M. Mathew, and M. Ganesapillai, “Adsorptive Resource Recovery from Human Urine: System Design, Parametric Considerations and Response Surface Optimization,” Procedia Eng., vol. 148, pp. 779–786, 2016.
  • P. Simha, M. Mathew, P. Jain, and M. Ganesapillai, “Resource Recovery and Recycling in Sanitation is Key to Health, Water and Food Security,” Procedia Technol., vol. 25, no. Raerest, pp. 201–207, 2016.
  • M. Ganesapillai, P. Manara, and A. Zabaniotou, “Effect of microwave pretreatment on pyrolysis of crude glycerol-olive kernel alternative fuels,” Energy Convers. Manag., vol. 110, pp. 287–295, 2016.
  • F. Chemat, N. Gnanasundaram, A. M. Shariff, and T. Murugesan, “Effect of L-arginine on Solubility of CO2 in Choline Chloride + Glycerol Based Deep Eutectic Solvents,” Procedia Eng., vol. 148, pp. 236–242, 2016.
  • Z. Ahmad, D. S. Patle, and G. P. Rangaiah, “Operator training simulator for biodiesel synthesis from waste cooking oil,” Process Saf. Environ. Prot., vol. 99, pp. 55–68, 2016.
  • Dinesh Antony and S Murugavelh ,"Anaerobic co digestion of kitchen waste and waste water sludge- biogas based power generation" BioFuels 2016 DOI 107.23.5409/2309/2
  • Sunil Suresh, Duple Singha and Murugavelh, "Biodiesel production from Waste Cotton Seed Soil: Engine performance and emission characteristics" BioFuels 2016 DOI 100.223.85.4509/9/132
  • K. Rambabu and S. Velu, “Modified polyethersulfone ultrafiltration membrane for the treatment of tannery wastewater,” Int. J. Environ. Stud., vol. 73, no. 5, pp. 819–826, 2016.
  • K. Rambabu and S. Velu, “Improved performance of CaCl2 incorporated polyethersulfone ultrafiltration membranes,” Period. Polytech. Chem. Eng., vol. 60, no. 3, pp. 181–191, 2016.
  • M. Ganesapillai, M. Mathew, A. Singh, and P. Simha, “Influence of microwave and ultrasound pretreatment on solvent extraction of bio-components from walnut (Julgans regia L.) shells,” Period. Polytech. Chem. Eng., vol. 60, no. 1, pp. 40–48, 2016.
  • C. Devarajulu and M. Loganathan, “Effect of Impeller Clearance and Liquid Level on Critical Impeller Speed in an Agitated Vessel using Different Axial and Radial Impellers,” J. Appl. Fluid Mech., vol. 9, no. 6, pp. 2753–2761, 2016.
  • A. S. and M. G. Nirmala Gnanasundaram, “Adsorption of Ni++ ions from aqueous solution onto microwave irradiated Sterculia foetida fruit shells,” Manag. Environ. Qual. An Int. J., vol. Vol. 27 Is, no. 1, p. pp 59-70, 2016.
  • M. A. Abdullah and T. Sekar, “Enhanced removal of sulfur from diesel fuel using non-hydrodesulfurization technique coupled with ultrasound technique,” J. Sci. Ind. Res. (India)., vol. 75, no. 4, pp. 258–261, 2016.
  • J. Selvin and A. Singh, “Solar Cabinet Dryer Integerated With Heat Storage Unit for the Metreological Condition of Oman,” Int J Pharm Bio Sci, vol. 7, no. 4, pp. 935–942, 2016.
  • B. K. Verma, J. R. Picardo, A. V. P. Gurumoorthy, and R. Krishnamoorthy, “Using MATCONT to generate bifurcation plots for chemical systems,” Int. J. ChemTech Res., vol. 9, no. 7, pp. 552–565, 2016.
  • J. R. A. Raj and L. Muruganandam, “Microbial growth and degradation kinetics of perchlorate by Proteus sp. LMNCRE in a batch reactor system,” Int. J. Environ. Sustain. Dev., vol. 15, no. 3, pp. 254–263, 2016.
  • K. Rambabu and S. Velu, “Modified Cellulose Acetate Ultrafiltration Composite Membranes For Enhanced,” vol. 14, no. 1, pp. 195–205, 2016.
  • L. Muruganandam, J. Ranjitha, and A. Harshavardhan, “A review report on physical and mechanical properties of particle boards from organic waste,” Int. J. ChemTech Res., vol. 9, no. 1, pp. 64–72, 2016.
  • K. Rambabu, S. Velu, A. V. P. Gurumoorthy, M., “Cellulose acetate / Poly ( ethylene glycol ) / Iron oxide composite membranes for improved dye removal,” Res. J. Pharm. , Biol. Chem. Sci., vol. 7, no. 552, pp. 552–560, 2016.
  • D. D. A. U. J. Mahesh Ganesapillai, Ashish Singh, Bhavana Subba Rao, “Extraction Of Alkaloids From Microwave Dried Adathoda Vasica Leaves - A Comparative Study,” Int. J. Pharma Bio Sci., vol. 6, no. 2, pp. 36–52, 2016.
  • S. Velu, L. Muruganandam, and G. Arthanareeswaran, “Preparation and performance studies on polyethersulfone ultrafiltration membranes modified with gelatin for treatment of tannery and distillery wastewater,” Brazilian J. Chem. Eng., vol. 32, no. 1, pp. 179–189, 2015.
  • N. Gnanasundaram, M. Loganathan, and K. Perumal, “Solid holdup in liquid solid circulating fluidized bed with viscous liquid medium,” Alexandria Eng. J., vol. 53, no. 4, pp. 959–968, 2014
  • K. Rambabu and S. Velu, “Polyethersulfone / poly(acrylic acid) / calcium chloride composite membranes for improved dye removal,” J. Chem. Pharm. Res., vol. 7, no. 9, pp. 247–253, 2015.
  • R. Ranganayakulu, G. Uday Bhaskar Babu, A. Seshagiri Rao, and D. S. Patle, “A comparative study of fractional order PIλ/PIλDµ tuning rules for stable first order plus time delay processes,” Resour. Technol., vol. 2, pp. S136–S152, 2016.
  • M. Ganesapillai, A. Singh, and P. Simha, “Separation processes and technologies as the mainstay in chemical, biochemical, petroleum and environmental engineering: A special issue,” Resour. Technol., vol. 2, pp. S1–S2, 2016.
  • K. R. Balinge, A. G. Khiratkar, M. Krishnamurthy, D. S. Patle, C. K. K., and P. R. Bhagat, “Deep-desulfurization of the petroleum diesel using the heterogeneous carboxyl functionalized poly-ionic liquid,” Resour. Technol., vol. 2, pp. S105–S113, 2016.
  • Aslam. AM and M. A. Abdullah, “Quality of kitchen waste generated at VIT University, Vellore,” Res. Rev. J. Ecol. Environ. Sci., vol. SI 1, no. 1, pp. 6–8, 2015.
  • M. Ganesapillai, P. Simha, K. Desai, Y. Sharma, and T. Ahmed, “Simultaneous resource recovery and ammonia volatilization minimization in animal husbandry and agriculture,” Resour. Technol., vol. 2, no. 1, pp. 1–10, 2016.
  • L. S. Keong, D. S. Patle, S. R. Shukor, and Z. Ahmad, “Biodiesel Production using Heterogeneous Catalyst in CSTR: Sensitivity Analysis and Optimization,” IOP Conf. Ser. Mater. Sci. Eng., vol. 121, p. 12007, 2016.
  • M. Al-Maghrabi, M. Imran, and C. Sharma, “Top Down Activation Enhancement of Bentonite for the Removal of Emulsified Oil from Wastewater,” J. Nanoeng. Nano manufacturing, vol. 6, no. 4, pp. 288–294, 2016.
  • N. Gnanasundaram, M. Loganathan, and A. Singh, “Optimization and Performance parameters for adsorption of Cr 6+ by microwave assisted carbon from Sterculia foetida shells,” IOP Conf. Ser. Mater. Sci. Eng., vol. 206, p. 12065, 2017.
  • F. K. and P. T. T.Sekar , M. Aslam Abdulah, “Novel approach to produce ultra low sulfur diesel fuel by non-hydrodesulfurization process coupled with bio-desulfurizationtechnique to meet environmental standards,” J. Environ. Biol., vol. 37, no. Special Issue, pp. 1451–1456, 2016.
  • R. W. G. and S. L. B. J.B Bhasarkar, “Modeling of packed Bed Column for the Removal of Cu (II) Ions from Aqueous Solution by Indian 730,” Curr. Environ. Eng., vol. 5, no. 3, pp. 242–248, 2016.

2015

  • Ganesapillai, M., Simha, P., and Zabaniotou, A. “Closed-loop fertility cycle: Realizing sustainability in sanitation and agricultural production through the design and implementation of nutrient recovery systems for human urine”, Sustainable production and consumption, Vol. 4, pp. 36-46, 2015.
  • Krishnamoorthy, R, and Sagadevan, V., “Polyethylene glycol and iron oxide nanoparticles blended polyethersulfone ultrafiltration membrane for enhanced performance in dye removal studies”, e-Polymers, Vol.15, No.3, pp. 151-159, 2015.
  • Ganesapillai, M., Venugopal, A., Ananthkrishna, V., Tapankrishna, N., “Influence of process parameters on sorption capacity of microwave activated biosorbents for urea recovery from human urine: a comparative study”, Asia‐Pacific Journal of Chemical Engineering”,Vol. 10,No. 3, pp. 438-449,2015.
  • Velu, S., Rambabu, K. “Development And Characterization Of Polyvinylidene Fluoride-Imidazolium Functionalized Polysulfone Blend Anion Exchange Membrane.”, Journal of Engineering Science and Technology, Vol.10, No.9, pp.1162-1179, 2015.
  • Nirmala, G. S., and Muruganandam, L. “An Experimental Study of Liquid-Solid Flow in a Circulating Fluidized Bed of Varying Liquid Viscosity. Journal of Applied Fluid Mechanics”, Vol.8, No.1, pp. 95-101, 2015.
  • Chitra, D., and Muruganandan, L., “Effect of Impeller blade width on critical impeller speed in a flat-bottomed agitated vessel”, International Journal of Applied Engineering and Research, Vol.12, No.21, pp. 42091-42098, 2015.
  • Rambabu, K., and Velu, S., “Performance of polyethersulfone membranes modified with low molecular weight polyacrylic acid”, International Journal of ChemTech Research, Vol.8, No.7, pp. 413-421,2015.
  • Gurumoorthy, V. P., and Krishnamoorthy, R., “Continuum Formulation for Polymers in Solution-A Review”. International Journal of Chemical Sciences, Vol.13, No.4, 2015.
  • 9 Vinati, A., Mahanty, B., and Behera, S. K. “Clay and clay minerals for fluoride removal from water: a state-of-the-art review”, Applied Clay Science, Vol.114, pp. 340-348, 2015.

  • Bhasarkar, J., Borah, A. J., Goswami, P., and Moholkar, V. S. “Mechanistic analysis of ultrasound assisted enzymatic desulfurization of liquid fuels using horseradish peroxidase”, Bioresource Technology, Vol.196, pp 88-98, 2015.
  • Bhasarkar, J. B., Dikshit, P. K., and Moholkar, V. S., “Ultrasound assisted biodesulfurization of liquid fuel using free and immobilized cells of Rhodococcus rhodochrous MTCC 3552: a mechanistic investigation”, Bioresource technology, Vol. 187, pp. 369-378, 2015.
  • Chowdhury, P. P., Shaik, A. H., and Chakraborty, J. “Preparation of stable sub 10nm copper nanopowders redispersible in polar and non-polar solvents”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.466, pp.189-196, 2015.
  • Fujii, M., Fujita, T., Dong, L., Lu, C., Geng, Y., Behera, S. K, and Chiu, A. S. F. “Possibility of developing low-carbon industries through urban symbiosis in Asian cities”, Journal of Cleaner Production, Vol.114 ,pp. 376-386, 2015.
  • Bhasarkar, J. B., Chakma, S., and Moholkar, V. S. “Investigations in physical mechanism of the oxidative desulfurization process assisted simultaneously by phase transfer agent and ultrasound”, Ultrasonics sonochemistry, Vol.24, pp.98-106, 2015.
  • Tripathi, M., Sahu, J. N., Ganesan, P., Monash, P., and Dey, T. K. “Effect of microwave frequency on dielectric properties of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS”. Journal of Analytical and Applied Pyrolysis,Vol.112, pp.306-312,2015.
  • Patra, S., Bal, D. K., and Ganguly, S. “Bubble formation in complex fluids using an orifice in throat arrangement”, Experimental Thermal and Fluid Science, Vol.64, pp.62-69, 2015.
  • Bhandari, R., Volli, V., and Purkait, M. K. “Preparation and characterization of fly ash based mesoporous catalyst for transesterification of soybean oil”, Journal of Environmental Chemical Engineering, Vol.3, No.2, pp. 906-914, 2015.
  • Volli, V., and Purkait, M. K. “Selective preparation of zeolite X and A from flyash and its use as catalyst for biodiesel production”. Journal of hazardous materials, Vol.297, pp. 101-111, 2015.
  • Jagadeesh, A., Chaudhari, G. G., Bal, D. K., Patra, S., and Ganguly, S. “Enhancement of solute release from chitosan scaffold with embedded submillimeter voids”, International Journal of Polymeric Materials and Polymeric Biomaterials,Vol.64, No.3, pp.134-139, 2015.
  • Behera, S. K., Kalyani, G., Amrita, B., and Park, H. S. “Response surface optimization of pH and coagulant dosage for pharmaceutical wastewater pretreatment using alum and bentonite”, Desalination and Water Treatment, Vol.57, No.15, pp. 6863-6874, 2015.
  • Meher, S. K., Behera, S. K., Kim, M. C., and Park, H. S. “Multiple Decision Expert Systems for Performance Analysis of a Boiler System”, Applied Artificial Intelligence,Vol.29, No.9, pp. 839-858,2015.
  • Rosdi, A. N., Kang, Y. L., Purushothaman, M., Ibrahim, S., and Pichiah, S. “Preparation and characterization of zeolite polymer composite proton exchange membrane”, Desalination and Water Treatment, Vol.57, No.1, pp.13-21, 2015.
  • Patra, S., Bal, D. K., and Ganguly, S. “Diffusion of moisture from hydrogel scaffold with induced porosity from self-assembled bubbles”, Drying technology, Vol.33, No.3, pp.336-345,2015.
  • Bhasarkar, J. B., Singh, M., and Moholkar, V. S,”Mechanistic insight into phase transfer agent assisted ultrasonic desulfurization”. RSC Advances, Vol.5, No.125, pp.102953-102964, 2015.
  • Nurhalim, N. A., Don, M. M., Ahmad, Z., and Patle, D. S. “Modeling and optimization of xylose production by enzymatic hydrolysis using neural network and particle swarm optimization”, Chemical Product and Process Modeling, Vol.10, No.3, pp.173-178, 2015.
  • Kim, S. W., Behera, S. K., Jamal, Y., and Park, H. S. “Optimization of Sodium Hydrosulfide Synthesis for Metal Recovery from Wastewater Using Flue Gas Containing H2S”, Journal of Environmental Engineering, Vol.142. No.9, pp. C4015009, 2015.
  • A. H. Shaik, J. Chakraborty, “Synthesis of Monodisperse copper nanoparticals using a modified digestive ripening technique and formation of super lattices”, RSC Advances, Vol. 5, pp. 85974-85977, 2015.

2014

  • M. G. Pillai, P. Simha, and A. Gugalia, “Recovering urea from human urine by bio-sorption onto Microwave Activated Carbonized Coconut Shells: Equilibrium, kinetics, optimization and field studies”,J. Environ. Chem. Eng., Vol. 2, No. 1, pp. 46–55, 2014.1.
  • M. G. Pillai, S. Sudhir, and B. Aswin, “Evaluation of Performance of Crop ProductionUsingLow Grade Fine Sized Rock Phosphate with Ammonium Sulphate In Alkaline Soil”, Vol. 6, No. 11, pp. 4687–4696, 2014.
  • Anand V P Gurumoorthyand V A Juvekar “Bridging Flocculation A Modeling Study Of The Role of Polymer Adsorption Dynamics”, Int. J. Chem. Sci. Vol. 12, No. 2, pp 315-326, 2014.
  • SarthakTibdewal, UstavSaxsena, Anand V P , Gurumoorthy , “Hydrogen Economy Vs. Menthonal Economy”, Int. J. Chem. Sci. Vol. 12, No.2, pp 1478-1486, 2014.
  • A. Singh, and G. Baskar, “Osmotic Dehydration Of Fruits An Integrated Approach,” Int. J. Food Nutr. Sci. Vol 5. No.2, pp. 457-464, 2014.
  • K. Rambabuand S. Velu, “Iron Nanoparticles Blended Polyethersulfone Ultrafiltration Membranes for Enhanced Metal Ion Removal in Wastewater Treatment,” Vol. 6, No. 10, pp. 4468–4470, 2014.
  • D. Chitraand L. Muruganandan, “Effect of solid concentration and impeller type on mixing operations in an agitated vessel,” Int. J. ChemTech Res., Vol. 6, No. 7, pp. 3665–3671, 2014.
  • S. Velu, K. Rambabu, and L. Muruganandam, “Development, characterization and application studies of cellulose acetate - Activated carbon blend ultra-filtration membranes,” Int. J. ChemTech Res., Vol. 6, No. 1, pp. 565–577, 2014.
  • R. Ilamathi, G. S. Nirmala, and L. Muruganandam, “Heavy metals biosorption in liquid solid fluidized bed by immobilized consortia in alginate beads,” Int. J. ChemTech Res., Vol. 6, No. 1, pp. 652–662, 2014.
  • S. Veluand K. Rambabu, L. Muruganandam “Preparation, Characterization and application studies of Cellulose acetate- poly acrylic acid blend ultra filtration membranes”, Int. J. ChemTech Res. Vol. 6, No.3, pp. 1855-1857,2014.
  • D. Chitraand L. Muruganandan, “Effect of impeller clearance and multiple impeller combinations on solid suspension in a standard flat bottom agitated vessel,” Int. J. ChemTech Res., Vol. 6, No. 2, pp. 973–981, 2014.
  • JosephinSelvi, Baskar G, Aruna Singh, “Effect of various pretreatment methods on osmatic Dehydration of fruits for Qualitative and Quantitative Advantage”, Int. J. ChemTech Res., Vol. 6, No. 12, pp. 4995-5001, 2014.
  • K. Rambabuand S. Velu, “Polyethersulfone – zinc chloride blend ultrafiltration membranes for enhanced flux,” J. Chem. Pharm. Sci., Vol. 2, No. 4, pp. 48–49, 2014.
  • A. Babuponnusamiand K. Muthukumar, “A review on Fenton and improvements to the Fenton process for wastewater treatment,” J. Environ. Chem. Eng., Vol. 2, No. 1, pp. 557–572, 2014.
  • A. H. Shaikand J. Chakraborty, “Use of repeated phase transfer for preparation ofthiol coated copper organosols at higher particle loading,” Colloids Surfaces A Physicochem. Eng. Asp.,Vol. 454, No. 1, pp. 46–56, 2014.
  • D. S. Patle, S. Sharma, Z. Ahmad, and G. P. Rangaiah, “Multi-objective optimization of two alkali catalyzed processes for biodiesel from waste cooking oil,” Energy Convers. Manag.,Vol. 85, pp. 361–372, 2014.
  • H. S. Park and S. K. Behera, “Methodological aspects of applying eco-efficiency indicators to industrial symbiosis networks,” J. Clean. Prod., Vol. 64, pp. 478–485, 2014.
  • S. K. Rath, V.K.Aswal, Chandan Sharma, K. Joshi, “Mechanistic origins of multi-scale reinforcements in segmented polyurethane-clay nanocomposites,” Polymer, Vol. 55, No. 20, pp. 5198–5210, 2014.
  • V. Volliand M. K. Purkait, “Physico-chemical properties and thermal degradation studies of commercial oils in nitrogen atmosphere,” Fuel, Vol. 117, pp. 1010–1019, 2014.
  • K. H. Leong, P. Monash, S. Ibrahim, and P. Saravanan, “Solar photocatalytic activity ofanatase TiO2nanocrystals synthesized by non-hydrolitic sol-gel method,” Sol. Energy, Vol. 101, pp. 321–332, 2014.
  • N. Van Vinh, M. Zafar, S. K. Behera, and H. S. Park, “Arsenic(III) removal from aqueous solution by raw and zinc-loaded pine cone biochar: equilibrium, kinetics, and thermodynamics studies,” Int. J. Environ. Sci. Technol., Vol. 12, No. 4, pp. 1283–1294, 2014.
  • S. K. Behera, S. K. Meher, and H. S. Park, “Artificial neural network model for predicting methane percentage in biogas recovered from a landfill upon injection of liquid organic waste,” Clean Technol. Environ. Policy, Vol. 17, No. 2, pp. 443–453, 2014.
  • M. S. Taskhiri, S. K. Behera, R. R. Tan, and H. S. Park, “Fuzzy optimization of a waste-to-energy network system in an eco-industrial park,” J. Mater. Cycles Waste Manag.,Vol. 17, No. 3, pp. 476–489, 2014.
  • D. K. Bal, S. Patra, and S. Ganguly, “Use of orifice-in-throat device to make alginate scaffolds with embedded voids of sub-millimeter tunable dimensions,” Microsyst. Technol., Vol. 20, No. 7, pp. 1359–1364, 2014.
  • A. Jagadeesh, G. G. Chaudhari, D. K. Bal, S. Patra, and S. Ganguly, “Enhancement of solute release from chitosan scaffold with embedded submillimeter voids,” Int. J. Polym. Mater. Polym. Biomater.,Vol. 64, No. 3, pp. 134–139, 2014.
  • C. Sharma, S. Kumar, A. R. Unni, V. K. Aswal, S. K. Rath, and G. Harikrishnan, “Foam stability and polymer phase morphology of flexible polyurethane foams synthesized from castor oil,” J. Appl. Polym. Sci., Vol. 131, No. 17, pp. 8420–8427, 2014.
  • D. S. Patle, Z. Ahmad, and G. P. Rangaiah, “Plantwide Control of Biodiesel Production from Waste Cooking Oil Using Integrated Framework of Simulation and Heuristics,” Ind. Eng. Chem. Res., Vol. 53, No. 37, pp. 14408–14418, 2014.
  • D. S. Patle, Z. Ahmad, and G. P. Rangaiah, “Operator training simulators in the chemical industry: Review, issues, and future directions,” Rev. Chem. Eng., Vol. 30, No. 2, pp. 199–216, 2014.
  • K. Sharmila, S. Ramya, and A. BabuPonnusami, “Carbon sequestration using microalgae-a review,” Int. J. ChemTech Res., Vol. 6, No. 9, pp. 4128–4133, 2014.