Centre for Biomaterials, Cellular and Molecular Theranostics (CBCMT)

Publications

2025
S.No Publication in citation format
1 Kodiyawala, Akshay, et al. “A water-soluble colorimetric and turn-on fluorescence sensor for fast and sensitive detection of sulfite/bisulfite ions in real samples and live cells.”Journal of Molecular Structure1321 (2025): 139723.
2 Babu, P. Dinesh, et al. “Wear behavior of CoCrFeNi high-entropy alloy prepared by mechanical alloying.”Journal of Alloys and Compounds1010 (2025): 177115.
3 Liu, Chi-Hsien, et al. “Sensitive dual-target electrochemiluminescence biosensor for simultaneous miRNA detection using magnetic carbon nanotubes and resonance energy transfer.”Sensors and Actuators B: Chemical424 (2025): 136876.
4 Dinesh, Lanka, et al. “Electrochemical analysis of friction welded 17-4 PH stainless steel components manufactured by selective laser melting.”International Journal on Interactive Design and Manufacturing (IJIDeM)19.1 (2025): 255-262.
5 Shukla, Riddhi, et al. “A novel Ti-eggshell-based composite fabricated by combined additive manufacturing-powder metallurgical routes as bioimplants.”Ceramics International51.5 (2025): 6281-6291.
6 Chakraborti, Sourangshu, et al. “Detection of Oral Submucous Fibrosis at the Crossroads of Altering Nucleogeometry, Nuclear Spatial Distribution and Nuclear Molecular Abundance.”Indian Journal of Otolaryngology and Head & Neck Surgery(2025): 1-10.
7 Yadav, Mayank Kumar, et al. “Metallic Multimaterials Fabricated by Combining Additive Manufacturing and Powder Metallurgy.”Journal of Composites Science9.2 (2025): 80.
8 Chen, Yingqi, et al. “Biofunctional supramolecular injectable hydrogel with spongy-like metal-organic coordination for effective repair of critical-sized calvarial defects.”Asian Journal of Pharmaceutical Sciences20.1 (2025): 100988.
9 He, Yuqi, et al. “Evaluation of fatigue crack growth rates and fracture toughness in a selective laser-melted Ti-5.6 Al-3.8 V alloy with optimized microstructure after heat treatment.”Materials Science and Engineering: A924 (2025): 147822.
10 Clinton Wilson, B. V., and D. S. Mohan Varma. “Preliminary testing of a mechanism-based gait training device with able-bodied individuals.”Journal of Enabling Technologies(2025).
11 Dhanasekaran, Kumudhavalli, et al. “Thiazole-derived pyrazin-2-carbohydrazide chemosensors: Colorimetric & photoluminescent detection of silver ions for theoretical, environmental, and cell imaging.”Journal of Photochemistry and Photobiology A: Chemistry458 (2025): 115973.
12 Tamizhselvi, R., et al. “p-Toluenesulfonyl hydrazide appended phenothiazine fluorescent Schiff base for selective Cu2+ and Fe3+ ions detection: Their potential applications in food sample analysis and live cell imaging studies.”Inorganic Chemistry Communications175 (2025): 114144.
13 Maurya, Himanshu Singh, et al. “Binder jetting 3D printing of green TiC-FeCr based cermets-Effect of sintering temperature and systematic comparison study with Laser powder bed fusion fabricated parts.”Materials Today Advances25 (2025): 100562.
14 Maurya, H. S., et al. “Forming ability of the WC-based ceramic metal composites with different Fe-based binders by unique laser beam modulation.”Next Materials7 (2025): 100524.
15 Xi, Lixia, et al. “Irradiation-induced atomic migration and its effect on the surface and mechanical properties of laser additive manufactured MWCNTs/Al-Mg-Sc-Zr composites.”Journal of Materials Research and Technology(2025).
16 Ramajayam, Kalaipriya, and Arunkumar Palaniappan. “Facile and green synthesis of highly fluorescent boron and nitrogen-doped carbon dots (BN-CDs) for the fluorimetric detection of Au3+ ions in aqueous media and in in vitro cell imaging.”Colloids and Surfaces A: Physicochemical and Engineering Aspects709 (2025): 136062.
17 Zhang, Hao, et al. “A cross-linked coating loaded with antimicrobial peptides for corrosion control, early antibacterial, and sequential osteogenic promotion on a magnesium alloy as orthopedic implants.”Acta Biomaterialia193 (2025): 604-622.
18 Kumar, Deepak, et al. “Role of Microstructure on Tension-Compression Asymmetry in Additively Manufactured Stainless Steel 316L.”Metallurgical and Materials Transactions A56.5 (2025): 1620-1640.
19 Wang, Yongxia, et al. “The influence of process parameters on the microstructure and properties of the TiC/Ti-alloy composites fabricated by the directed energy deposition process.”Journal of Materials Research and Technology34 (2025): 164-174.
20 Dar, Mohammad Suhaan, et al. “Graphene quantum dots as nanotherapeutic agents for triple-negative breast cancer: Insights from 3D tumor models.”Coordination Chemistry Reviews523 (2025): 216247.
21 Prashanth, Konda Gokuldoss. “Interpenetrating Composites: A Nomenclature Dilemma.”Materials18.2 (2025): 273.
22 Fasogbon, Ilemobayo Victor, et al. “RECENT FOCUS IN NON-SELEX-COMPUTATIONAL APPROACH FOR DE NOVO APTAMER DESIGN: A MINI REVIEW.”Analytical Biochemistry(2024): 115756.
23 Mohan, Sunil P., et al. “The Potential Role of Adipose-Derived Stem Cells in Regeneration of Peripheral Nerves.”Neurology International17.2 (2025): 23.
2024
S.No Publication in citation format
1 Ganesan, Selvaganapathy, et al. “Efficient photocatalytic degradation of textile dye pollutants using thermally exfoliated graphitic carbon nitride (TE?g?C3N4).”Scientific Reports14.1 (2024): 2284.
2 Zhao, Shunli, et al. “Machine learning assisted design of high-entropy alloys with ultra-high microhardness and unexpected low density.”Materials & Design238 (2024): 112634.
3 Kumar, Deepak, et al. “Control of texture and microstructure in additive manufacturing of stainless steel 316 L.”Journal of Alloys and Compounds976 (2024): 173040.
4 Singh, Shalini, et al. “Wire arc additive manufacturing of NiTi 4D structures: influence of interlayer delay.”3D Printing and additive manufacturing11.1 (2024): 152-162.
5 Zhao, Jin, et al. “Enhanced osteogenic and ROS-scavenging MXene nanosheets incorporated gelatin-based nanocomposite hydrogels for critical-sized calvarial defect repair.”International Journal of Biological Macromolecules269 (2024): 131914.
6 Praveenkumar, K., et al. “High temperature dry sliding wear behaviour of selective laser melted Ti-6Al-4V alloy surfaces.”Journal of Materials Processing Technology329 (2024): 118439.
7 Wei, Shuimiao, et al. “Crack formation and control in an AlCoCrFeNi high entropy alloy fabricated by selective laser melting.”3D Printing and Additive Manufacturing11.2 (2024): e628-e637.
8 Dhanasekaran, Kumudhavalli, et al. “A thiazole-based colorimetric and photoluminescent chemosensors for As3+ ions detection: Density functional theory, test strips, real samples, and bioimaging applications.”Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy316 (2024): 124325.
9 Shyam, Rohin, and Arunkumar Palaniappan. “Development and optimization of starch-based biomaterial inks and the effect of infill patterns on the mechanical, physicochemical, and biological properties of 3D printed scaffolds for tissue engineering.”International Journal of Biological Macromolecules258 (2024): 128986.
10 Lekshmi, G. S., et al. “Engineering of brewery waste-derived graphene quantum dots with ZnO nanoparticles for treating multi-drug resistant bacterial infections.”Journal of environmental chemical engineering12.2 (2024): 112263.
11 Zhang, Zhen, et al. “Thermal deformation behavior and microstructural evolution of the rapidly-solidified Al?Zn?Mg?Cu alloy in hot isostatic pressing state.”Journal of Materials Research and Technology30 (2024): 5927-5939.
12 Murugapandian, Rama, et al. “Comparative Analysis of Electrospun Silk Fibroin/Chitosan Sandwich-Structured Scaffolds for Osteo Regeneration: Evaluating Mechanical Properties, Biological Performance, and Drug Release.”ACS omega9.26 (2024): 28072-28092.
13 Tamizhselvi, R., et al. “A dual responsive bis-thiophene affixed thiosemicarbazide based chemosensor for colorimetrically Hg2+ and fluorometrically Cu2+ ions and their applications in live cell imaging.”Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy322 (2024): 124766.
14 Praveenkumar, K., et al. “In-vitro fretting tribocorrosion and biocompatibility aspects of laser shock peened Ti-6Al-4V surfaces.”Applied Surface Science665 (2024): 160334.
15 Anandan, Dhivyaa, and Amit Kumar Jaiswal. “Synthesis methods of hydroxyapatite and biomedical applications: an updated review.”Journal of the Australian Ceramic Society60.2 (2024): 663-679.
16 Baskaran, Jagadeesh, et al. “Manufacturability and deformation studies on a novel metallic lattice structure fabricated by Selective Laser Melting.”Vacuum222 (2024): 113065.
17 Carvalho, Bruna Gregatti, et al. “Gelatin methacryloyl granular scaffolds for localized mRNA delivery.”Aggregate5.2 (2024): e464.
18 Karimi, J., C. Zhao, and K. G. Prashanth. “Massive transformation in dual-laser powder bed fusion of Ti6Al4V alloys.”Journal of Manufacturing Processes119 (2024): 282-292.
19 Maurya, Himanshu Singh, et al. “EBSD investigation of microstructure and microtexture evolution on additively manufactured TiC-Fe based cermets?Influence of multiple laser scanning.”Micron180 (2024): 103613.
20 Singh, Neera, et al. “In situ production of low-modulus Ti?Nb alloys by selective laser melting and their functional assessment toward orthopedic applications.”Journal of Materials Chemistry B12.24 (2024): 5982-5993.
21 Ye, Zimeng, et al. “Evaluating the microstructural formation in Mo added Ti6Al4V alloy fabricated by direct energy deposition using a laser-stop strategy.”Additive Manufacturing86 (2024): 104226.
22 Gao, Qingwei, et al. “High-temperature oxidation behaviors of Co-free Cr30Fe30Ni30Al5Ti5 dual-phase multi-component alloys with multi-scale nanoprecipitates.”Materials Today Advances22 (2024): 100482.
23 Kokulnathan, Thangavelu, et al. “Mechanochemically synthesized flower-like bismuth oxyhalides: An electrochemical platform for diclofenac detection.”Journal of Environmental Chemical Engineering12.5 (2024): 114049.
24 Singh, Shalini, et al. “NiTi?Cu Bimetallic Structure Fabrication through Wire Arc Additive Manufacturing.”Materials17.5 (2024): 1006.
25 Patil, Viraj Vishwas, Chinmaya P. Mohanty, and K. G. Prashanth. “Parametric optimization of selective laser melted 13Ni400 maraging steel by Taguchi method.”Journal of Manufacturing and Materials Processing8.2 (2024): 52.
26 Daniel, S. Ashish, and P. Suya Prem Anand. “A new approach to estimate unknown process parameters of laser-based powder bed fusion: printed SS316L using box?behnken method.”Journal of Materials Engineering and Performance33.17 (2024): 9178-9193.
27 Mamindla, Anjaneyulu, et al. “Mixed-ligand copper (ii)-diimine complexes of 3-formylchromone-N 4-phenyl thiosemicarbazone: 5, 6-dmp co-ligand confers enhanced cytotoxicity.”RSC advances14.43 (2024): 31704-31722.
28 Shastri, Renu Kiran, et al. “Optimizing the Electrical Discharge Machining Process Parameters of the Nimonic C263 Superalloy: A Sustainable Approach.”Journal of Manufacturing and Materials Processing8.3 (2024): 126.
29 Ganesan, Selvaganapathy, et al. “Sulfur-doped graphitic C3N4 decorated on cauliflower-like CaMoO4: An efficient electrocatalyst for electrochemical detection of carcinogenic organic pollutant (metol).”Chemosphere369 (2024): 143815.
30 Singh, Shalini, et al. “Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc Additive Manufactured Nitinol: Titanium Bimetallic Structures.”3D Printing and Additive Manufacturing11.1 (2024): 143-151.
31 Zhang, Peng, et al. “An injectable magnesium-coordinated phosphate chitosan-based hydrogel loaded with vancomycin for antibacterial and osteogenesis in the treatment of osteomyelitis.”Regenerative Biomaterials11 (2024): rbae049.
32 Khan, Pearlin Amaan, et al. “In Vivo Assessment of a Triple Periodic Minimal Surface Based Biomimmetic Gyroid as an Implant Material in a Rabbit Tibia Model.”ACS Materials Au4.5 (2024): 479-488.
33 Yang, Hong, et al. “Microstructure and mechanical performances of NiCoFeAlTi high-entropy intermetallic reinforced CoCrFeMnNi high-entropy alloy composites manufactured by selective laser melting.”Journal of Materials Research and Technology33 (2024): 6275-6287.
34 Kolli, Nishant Kumar, et al. “Unveiling the multi-faceted features and potential applications of novel combeite?barium titanate composites.”Chemical Papers78.7 (2024): 4425-4435.
35 Ye, Zimeng, et al. “Understanding the solute segregation and redistribution behavior in rapidly solidified binary Ti-X alloys fabricated through non-equilibrium laser processing.”Additive Manufacturing96 (2024): 104561.
36 Mishra, Arushi Hitendra, et al. “Bioselective and Radiopaque Zinc-Biopolymeric Complex-Based Porous Biomaterials Promote Mammalian Tissue Ingrowth In Vivo While Inhibiting Microbial Biofilm Gene Expression and Biofilm Formation.”ACS Applied Bio Materials7.6 (2024): 3701-3713.
37 Goenka, Vidul, et al. “Development of guar gum reinforced calcium magnesium phosphate?based bone biocement.”Journal of Biomedical Materials Research Part B: Applied Biomaterials112.3 (2024): e35384.
38 Wang, Ruiqi, et al. “Synergistic Strengthening Mechanisms of Dual-Phase (TiN plus AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion.”3D PRINTING AND ADDITIVE MANUFACTURING(2023).
39 Yarlapati, Akshay, et al. “Recent Advances in Additive Manufacturing of Refractory High Entropy Alloys: A Critical Review.”Journal of Alloys and Metallurgical Systems(2024): 100120.
40 Sellamuthu, Prabhukumar, Katakam Sivaprasad, and Konda Gokuldoss Prashanth. “Selective Laser Melting of AlSi10Mg: Corrosion Behavior.”Journal of Mines, Metals and Fuels(2024): 93-102.
41 Benny, Anjitha Theres, et al. “Synthesis and study of antibiofilm and antivirulence properties of flavonol analogues generated by palladium catalyzed ligand free Suzuki?Miyaura coupling against Pseudomonas aeruginosa PAO1.”RSC advances14.18 (2024): 12278-12293.
42 Babu, P. Dinesh, et al. “Impact of copper and manganese on phase transformation, microstructural development and material strength in CoCrFeNi high-entropy alloys through mechanical alloying.”Materials Today Communications40 (2024): 109579.
43 Deng, Guiying, et al. “Effect of Precipitation Heat Treatment on a Mechanically Alloyed Al?Based Composite Reinforced with Metallic Glassy Powder.”Advanced Engineering Materials: 2401075.
44 Ganesan, Selvaganapathy, et al. “Semiconductor quantum dots for in vitro diagnostics and cellular imaging.”Evolving Landscape of Molecular Diagnostics. Elsevier, 2024. 121-142.
45 Beena, Maya, Purnimajayasree Ramesh, and Arunkumar Palaniappan. “Poly (amidoamine)-based dendrimers for biomedical applications.”Synthetic Polymers in Drug and Biotherapeutics Delivery. Woodhead Publishing, 2025. 105-132.
46 Ramesh, Purnimajayasree, et al. “Poly (lactic-co-glycolic acid) in drug delivery and tissue engineering applications.”Synthetic Polymers in Drug and Biotherapeutics Delivery. Woodhead Publishing, 2025. 59-103.
47 Saamisha, Panneerselvam, et al. “Herbal Medicines for COVID-19: The Impact of Flavonoids on Protein Targets.”Traditional and Herbal Medicines for COVID-19. CRC Press, 2024. 221-238.
48 Kargozar, Saeid, et al. “Bioactive Glasses and Ceramics for Improved Angiogenesis.”Bioceramics: Status in Tissue Engineering and Regenerative Medicine (Part 2)(2024): 139.
49 Cheirmadurai, K., et al. “On the Selection and use of Biomaterials and Implants in Orthopedics: A Study and Evaluation into the Future.”Advanced Materials for Emerging Applications (Innovations, Improvements, Inclusion and Impact). Bentham Science Publishers, 2024. 353-394.
50 Akshaya, Shenbagaraman, and Arputharaj Joseph Nathanael. “A review on hydrophobically associated alginates: approaches and applications.”ACS omega9.4 (2024): 4246-4262.
51 Marrazza, Giovanna, et al. “Advancements and emerging technologies in biosensors for rapid and accurate virus detection.”TrAC Trends in Analytical Chemistry(2024): 117609.
52 Pavithra, S., et al. “PER2 gene and its association with sleep-related disorders: A review.”Physiology & Behavior273 (2024): 114411.
53 Lakshminarayanan, Kalaiarasu, et al. “Siderophore-conjugated antifungals: A strategy to potentially cure fungal infections.” ACS Infectious Diseases 10.8 (2024): 2448-2466.
54 Tripathi, Shivi, et al. “Surface engineering of orthopedic implants for better clinical adoption.”Journal of Materials Chemistry B12.44 (2024): 11302-11335.
55 Sreena, Radhakrishnan, et al. “Bioactive glass-polymer nanocomposites: a comprehensive review on unveiling their biomedical applications.”Journal of materials chemistry. B.
56 Venkatesan, Janarthanan, et al. “Powering up targeted protein degradation through active and passive tumour-targeting strategies: Current and future scopes.”Pharmacology & Therapeutics(2024): 108725.
57 Paul, Srijita, et al. “Muco-Adhesive and Muco-Penetrative Formulations for the Oral Delivery of Insulin.”ACS omega9.23 (2024): 24121-24141.
58 Fasogbon, Ilemobayo V., et al. “Point-of-care potentials of lateral flow-based field screening for Mycoplasma bovis infections: a literature review.”Biology Methods and Protocols9.1 (2024): bpae034.
59 Wan, Shiguang, et al. “Research Progress on Composition Design of Multicomponent Eutectic High Entropy Alloys.”Transactions of the Indian Institute of Metals77.6 (2024): 1455-1465.
60 Zhang, Zuyao, et al. “Metal-metal interpenetrating phase composites: A Review.”Journal of Alloys and Compounds(2024): 176951.
61 Shanmugam, Iswarya, et al. “Emerging role and translational potential of small extracellular vesicles in neuroscience.”Life Sciences(2024): 122987.
62 Shyam, Rohin, et al. “Evolution of toxicity testing platforms from 2D to advanced 3D bioprinting for safety assessment of drugs.”Bioprinting(2024): e00363.
63 Agnishwaran, Bala, Geetha Manivasagam, and Anjaneyulu Udduttula. “Molecularly Imprinted Polymers: Shaping the Future of Early-Stage Bone Loss Detection? A Review.”ACS omega9.8 (2024): 8730-8742.
2023
S.No Publication in citation format
1 Li, Guoqing, et al. “An injectable liposome-anchored teriparatide incorporated gallic acid-grafted gelatin hydrogel for osteoarthritis treatment.”Nature communications14.1 (2023): 3159.
2 Chen, Hongyu, et al. “Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion.”Journal of Materials Science & Technology136 (2023): 245-259.
3 Zhang, Zhiyu, et al. “Effect of NiCoFeAlTi high entropy intermetallic reinforcement particle size on the microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy composites fabricated by selective laser melting.”Journal of Alloys and Compounds947 (2023): 169417.
4 Praveenkumar, K., S. Swaroop, and Geetha Manivasagam. “Effect of multiple laser shock peening without coating on residual stress distribution and high temperature dry sliding wear behaviour of Ti-6Al-4 V alloy.”Optics & Laser Technology164 (2023): 109398.
5 Jagadeesh, B., Muthukannan Duraiselvam, and K. G. Prashanth. “Deformation behavior of metallic lattice structures with symmetrical gradients of porosity manufactured by metal additive manufacturing.”Vacuum211 (2023): 111955.
6 Dong, Yangping, et al. “Strong and ductile titanium via additive manufacturing under a reactive atmosphere.”Materials Today Advances17 (2023): 100347.
7 Ma, Pan, et al. “Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting.”Journal of Materials Research and Technology25 (2023): 7090-7100.
8 Singh, Shalini, et al. “Influence of the interlayer temperature on structure and properties of CMT wire arc additive manufactured NiTi structures.”Journal of Alloys and Compounds966 (2023): 171447.
9 Peng, Cong, et al. “Electron beam melting of (FeCoNi) 86Al7Ti7 high-entropy alloy.”Journal of Alloys and Compounds960 (2023): 170752.
10 Vikram, R. J., et al. “Effect of scanning strategy on microstructure and texture evolution in a selective laser melted Al-33Cu eutectic alloy.”Journal of Alloys and Compounds936 (2023): 168098.
11 Xi, Lixia, et al. “Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusion.”Journal of alloys and compounds939 (2023): 168803.
12 Zhang, Xinqi, et al. “Microstructure evolution and tensile property of high entropy alloy particle reinforced 316 L stainless steel matrix composites fabricated by laser powder bed fusion.”Journal of Alloys and Compounds965 (2023): 171430.
13 Maurya, Himanshu Singh, et al. “Selective laser melting of TiC-Fe via laser pulse shaping: microstructure and mechanical properties.”3D Printing and Additive Manufacturing10.4 (2023): 640-649.
14 Maurya, H. S., et al. “Additive manufacturing of TiC-based cermets: A detailed comparison with spark plasma sintered samples.”Journal of Alloys and Compounds960 (2023): 170436.
15 Kanth Kadiyala, Nalinee, et al. “Efficient one-pot solvothermal synthesis and characterization of zirconia nanoparticle-decorated reduced graphene oxide nanocomposites: evaluation of their enhanced anticancer activity toward human cancer cell lines.”ACS omega8.2 (2023): 2406-2420.
16 Alinejadian, Navid, et al. “Selective laser melting of commercially pure molybdenum by laser rescanning.”3D Printing and Additive Manufacturing10.4 (2023): 785-791.
17 Enbanathan, Saravanan, et al. “Rational design of diphenyl-?(5) s (4)-phosphinine based fluorescent probe for the selective detection of Hg2+ ions: Real application in cell imaging and paper strips.”JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY437 (2023).
18 Kartikeyan, Radhakrishnan, et al. “Mixed ligand copper (II)-diimine complexes of 2-formylpyridine-N 4-phenylthiosemicarbazone: Diimine co-ligands tune the in vitro nanomolar cytotoxicity.”Dalton Transactions52.26 (2023): 9148-9169.
19 Sokkalingam, Rathinavelu, et al. “Additive Manufacturing of CoCrFeMnNi High?Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures.”Advanced Engineering Materials25.7 (2023): 2200341.
20 Patil, Viraj Vishwas, Chinmaya P. Mohanty, and K. G. Prashanth. “Selective laser melting of a novel 13Ni400 maraging steel: Material characterization and process optimization.”Journal of Materials Research and Technology27 (2023): 3979-3995.
21 Sheng, Weibei, et al. “Advanced phosphocreatine-grafted chitosan hydrogel promote wound healing by macrophage modulation.”Frontiers in Bioengineering and Biotechnology11 (2023): 1199939.
22 Subramanian, Shangavi, Shalini Mohanty, and K. G. Prashanth. “Effect of process parameters on the properties of ?-Ti-Nb-based alloys fabricated by selective laser melting: A review.”Materials Today: Proceedings(2023).
23 Maurya, H. S., et al. “Investigation of the tribological behavior of the additively manufactured TiC-based cermets by scratch testing.”Journal of Alloys and Compounds959 (2023): 170496.
24 Singh, Shalini, et al. “Development of Cu-based shape memory alloy through selective laser melting from elemental powder mixture: Processing and characterization.”Journal of Alloys and Compounds961 (2023): 171029.
25 Maurya, H. S., et al. “Additive manufacturing of CMCs with bimodal microstructure.”Journal of Alloys and Compounds938 (2023): 168416.
26 Fang, Yacheng, et al. “Selective laser melting of AlCoCrFeMnNi high entropy alloy: Effect of heat treatment.”Journal of Materials Research and Technology26 (2023): 7845-7856.
27 Maurya, H. S., et al. “Selective laser melting of TiC-based cermet: HIP studies.”Transactions of the Indian Institute of Metals76.2 (2023): 565-570.
28 Raghuram, P., et al. “Modeling and analyzing the inventory level for demand uncertainty in the VUCA world: Evidence from biomedical manufacturer.”IEEE Transactions on Engineering Management70.8 (2022): 2944-2954.
29 Ghosh, Sumit, et al. “Surface nanocrystallization enhances the biomedical performance of additively manufactured stainless steel.”Journal of Materials Chemistry B11.40 (2023): 9697-9711.
30 Govind, V., et al. “Fretting wear behavior of Al-Si-Mg-Ni hypoeutectic alloy with varying solutionizing time.”Silicon15.10 (2023): 4193-4206.
31 Anandan, Dhivyaa, Amit Kumar, and Amit Kumar Jaiswal. “Comparative study of hydroxyapatite synthesized using Schiff base and wet chemical precipitation methods.”Journal of the Mechanical Behavior of Biomedical Materials148 (2023): 106200.
32 Karimi, J., L. Kollo, and K. G. Prashanth. “Characterization of gas-atomized equiatomic AlCoCrFeNi powder for additive manufacturing.”Metallurgical and Materials Transactions A54.9 (2023): 3417-3424.
33 Thirathipviwat, Pramote, et al. “Superior fretting wear resistance of 30Nb5Ta30Ti15V20Zr refractory high entropy alloy in a comparison with Ti6Al4V.”Materials Letters339 (2023): 134105.
34 Udduttula, Anjaneyulu, et al. “Layer-by-layer coatings of collagen?hyaluronic acid loaded with an antibacterial manuka honey bioactive compound to fight metallic implant infections.”ACS Applied Materials & Interfaces15.50 (2023): 58119-58135.
35 Shukla, Riddhi, and Konda Gokuldoss Prashanth. “Ti6Al4V coating on 316L substrate by laser-based fusion process.”Transactions of the Indian Institute of Metals76.2 (2023): 435-445.
36 Khan, Pearlin Amaan, et al. “Influence of graphene nanoplatelets on the performance of axial suspension plasma-sprayed hydroxyapatite coatings.”Bioengineering10.1 (2022): 44.
37 Kaczmarek-Szczepa?ska, Beata, et al. “The modification of titanium surface by decomposition of tannic acid coating.”Applied Sciences13.8 (2023): 5204.
38 Kanth Kadiyala, Nalinee, et al. “Biofabricated palladium nanoparticle-decorated reduced graphene oxide nanocomposite using the Punica granatum (pomegranate) peel extract: Investigation of potent in vivo hepatoprotective activity against acetaminophen-induced liver injury in Wistar albino rats.”ACS omega8.27 (2023): 24524-24543.
39 Ma, Pan, et al. “Microstructure and Nanoindentation Creep Behavior of Binary Al-Cu Alloy Synthesized at High Pressure.”JOM75.1 (2023): 176-183.
40 Hu, Qingxi, et al. “A 5+ 1-axis 3D printing platform for producing customized intestinal fistula stents.”3D Printing and Additive Manufacturing10.5 (2023): 955-970.
41 Teng, Bin, et al. “Cervical vertebrae for early bone loss evaluation in osteoporosis mouse models.”Quantitative Imaging in Medicine and Surgery13.4 (2023): 2466.
42 Shukla, Riddhi, Rathinavelu Sokkalingam, and K. G. Prashanth. “Densification of the eggshell powder by spark plasma sintering.”Journal of Alloys and Compounds962 (2023): 171079.
43 Chakraborti, Sourangshu, et al. “Induction of epithelial to mesenchymal transition in HPV16 E6/E7 oncogene transfected C33A cell line.”Tissue and Cell82 (2023): 102041.
44 Mohan, Sunil Paramel, and Arunkumar Palaniappan. “Evaluation of Non-Cross Linked Xeno-Free Hyaluronic Acid Solutions as Visco Elastic Biomaterials.”Journal of Pharmacy and Bioallied Sciences15.Suppl 1 (2023): S673-S676.
45 Ravi Dhas, C., et al. “Correlation of annealing temperature on physico-chemical properties and electrochromic performance of nebulizer spray-coated NiO films.”Inorganic and Nano-Metal Chemistry53.2 (2023): 178-190.
46 Mohanty, Shalini, Himanshu Singh Maurya, and Konda Gokuldoss Prashanth. “Selective laser melting of Inconel 718: Effect of thermal treatment on mechanical properties.”Materials Today: Proceedings(2023).
47 Lokeshkumar, E., et al. “Effect of electrolyte composition on the surface characteristics of plasma electrolytic oxidation coatings over Ti40Nb alloy.”Surface and Coatings Technology465 (2023): 129591.
48 Ma, Pan, et al. “Microstructure and Tribological Behavior of Fe-Based Amorphous Alloy Fabricated by Plasma Spraying and Laser Remelting.”Transactions of the Indian Institute of Metals76.4 (2023): 1007-1014.
49 Yang, Zhilu, et al. “Microstructure and tribological behavior of Al?12Si?Nano graphene composite fabricated by laser metal deposition process.”Journal of Materials Research and Technology27 (2023): 2311-2322.
50 Kanth Kadiyala, Nalinee, et al. “One-pot solvothermal synthetic route of a zinc oxide nanoparticle-decorated reduced graphene oxide nanocomposite: an advanced material with a novel anticancer theranostic approach.”ACS omega8.49 (2023): 46763-46776.
51 Subramani, Pavithra, and RAUNAK KUMAR DAS. “Possible therapeutic role of short-chain fatty acids from skin commensal bacteria in UVB-induced skin carcinogenesis.”Biocell47.10 (2023).
52 Jaisankar, Abinaya, Sasirekha Krishnan, and Murugan Ramalingam. “Design and development of nanoscale aptasensors for viral diagnostics.”Lett. Appl. NanoBioScience12 (2023): 34.
53 Kesavan, Mookkandi Palsamy, et al. “Promising anticancer activity with high selectivity of DNA/plasma protein targeting new phthalazin-1 (2H)-one heterocyclic scaffolds.”Journal of Molecular Structure1274 (2023): 134423.
54 Lanka, Dinesh, et al. “Microstructural and mechanical behaviour of friction welded SS316L components fabricated by selective laser melting.”Materials Today Communications37 (2023): 107430.
55 Sarda, Vivek, et al. “Design of a low-cost, reconfigurable, standing wheelchair with easy and stable sit-stand-sit transition capability.”Disability and Rehabilitation: Assistive Technology18.7 (2023): 1056-1065.
56 Mohan, Sunil Paramel, et al. “In vitro Cytotoxicity Evaluation of Flowable Hyaluronic Acid?Acellular Stromal Vascular Fraction (HA?aSVF) Mixture for Tissue Engineering Applications.”Journal of Pharmacy and Bioallied Sciences15.Suppl 1 (2023): S677-S682.
57 Jain, Nishant K., et al. “Metal and carbon nanocarriers for potential delivery of plant-based active ingredients.”Nanotechnology in Herbal Medicine. Woodhead Publishing, 2023. 425-446.
58 Sivaprasad, Katakam, Nagumothu Ramesh Babu, and Konda Gokuldoss Prashanth. “Additive manufacturing and allied technologies.”International Journal of Materials Research114.10-11 (2023): 823-823.
59 Shyam, Rohin, L. Vinod Kumar Reddy, and Arunkumar Palaniappan. “Fabrication and characterization techniques of in vitro 3D tissue models.”International Journal of Molecular Sciences24.3 (2023): 1912.
60 Ramajayam, Kalaipriya, et al. “Molecularly imprinted polymer-based biomimetic systems for sensing environmental contaminants, biomarkers, and bioimaging applications.”Biomimetics8.2 (2023): 245.
61 Sreena, Radhakrishnan, and Arputharaj Joseph Nathanael. “Biodegradable biopolymeric nanoparticles for biomedical applications-challenges and future outlook.”Materials16.6 (2023): 2364.
62 Ramalingam, Murugan, et al. “Impact of nanotechnology on conventional and artificial intelligence-based biosensing strategies for the detection of viruses.”Discover Nano18.1 (2023): 58.
63 Chen, Hongyu, et al. “Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites.”International Materials Reviews68.8 (2023): 1192-1244.
64 Ganesan, Selvaganapathy, et al. “Recent advances in two-dimensional MXene-based electrochemical biosensors for sweat analysis.”Molecules28.12 (2023): 4617.
65 Rahmani, Ramin, Sérgio Ivan Lopes, and Konda Gokuldoss Prashanth. “Selective laser melting and spark plasma sintering: a perspective on functional biomaterials.”Journal of Functional Biomaterials14.10 (2023): 521.
66 Mohanty, Shalini, and Konda Gokuldoss Prashanth. “Metallic coatings through additive manufacturing: a review.”Materials16.6 (2023): 2325.
67 Ramesh, Purnimajayasree, and Arunkumar Palaniappan. “Terminalia arjuna, a cardioprotective herbal medicine?relevancy in the modern era of pharmaceuticals and green nanomedicine?A review.”Pharmaceuticals16.1 (2023): 126.
68 Ezhilmaran, V., et al. “Review of bioresorbable AZ91, AZ31 and Mg?Zn?Ca implants and their manufacturing methods.”Materials Science and Technology39.8 (2023): 901-925.
69 Shyam, Rohin, and Arunkumar Palaniappan. “Effect of sterilization techniques on biomaterial inks? properties and 3D bioprinting parameters.”Bioprinting33 (2023): e00294.
70 Murugan, Dhanashree, and Loganathan Rangasamy. “A perspective to weaponize microRNAs against lung cancer.”Non-coding RNA Research8.1 (2023): 18-32.
71 Praveenkumar, K., et al. “Laser shock peening: a promising tool for enhancing the aeroengine materials? surface properties.”Surface Engineering39.3 (2023): 245-274.
72 Ulaganathan, Suryapriya, and Arunkumar Pitchaimani. “Spontaneous and familial models of Alzheimer’s disease: challenges and advances in preclinical research.”Life sciences328 (2023): 121918.
73 VK, Anupama Devi, Anjaneyulu Udduttula, and Amit Kumar Jaiswal. “Unveiling the secrets of marine?derived fucoidan for bone tissue engineering?A review.”Frontiers in Bioengineering and Biotechnology10 (2023): 1100164.
74 Ramesh, Saravanan, Kavitha Govarthanan, and Arunkumar Palaniappan. “TiO2 nanostructures?a double edged sword: current progress on their role in stem cells? differentiation, cancer therapy, and their toxicity issues.”Nanotoxicology17.2 (2023): 176-201.
75 Manikandan, Ceera, and Amit Kumar Jaiswal. “Scaffold?based spheroid models of glioblastoma multiforme and its use in drug screening.”Biotechnology and Bioengineering120.8 (2023): 2117-2132.
76 Murugan, Dhanashree, and Loganathan Rangasamy. “Pooled evidence from preclinical and clinical studies for stem cell-based therapy in ARDS and COVID-19.”Molecular and Cellular Biochemistry478.7 (2023): 1487-1518.
77 Saraf, Shantanu, P. K. Suresh, and Raunak Kumar Das. “Unravelling the role of EMT in OSCC: a quick peek into HPV-mediated pathogenesis.”Oral Oncology Reports5 (2023): 100016.
78 Anandan, Dhivyaa, et al. “Investigation of Giant Cell Tumor of Bone and Tissue Engineering Approaches for the Treatment of Giant Cell Tumor of Bone.”ACS Applied Bio Materials6.10 (2023): 3946-3958.
2022
  1. Murugan, D.; Murugesan, V.; Panchapakesan, B.; Rangasamy, L. Nanoparticle Enhancement of Natural Killer (NK) Cell-Based Immunotherapy. Cancers 14, 2022.
  2. Murugan, Dhanashree, Rangasamy, Loganathan, The use of antimicrobial biomaterials as a savior from post-operative vascular graft-related infections: A review, Results in Engineering, 16 (2022).
  3. Murugan, Dhanashree, Rangasamy, Loganathan, A perspective to weaponize microRNAs against lung cancer, Non coding RNA research, 8(1), (2022).
  4. UC Narayanan, SPP Anand, Selective laser melting and post-processing stages for enhancing the material behavior of cobalt-chromium alloy in total hip replacement: a review, Materials and Manufacturing process, (2022).
  5. JOUR, Dukle, Amey, Murugan, Dhanashree, Nathanael, A, Rangasamy, Loganathan, Oh, Taehwan, Can 3D-Printed Bioactive Glasses Be the Future of Bone Tissue Engineering?, Polymers, 14, 2022
  6. A. Raheem, P. Hameed, R. Whenish, R. S. Elsen, A. K. Jaiswal, K. G. Prashanth, G. Manivasagam, A review on development of Bio-inspired implants using 3D printing, Biomimetics, 6 (2021) 65.
  7. V. K. A. Devi, R. Shyam, A. Palaniappan, A. K. Jaiswal, T. H. Oh, A. J. Nathanael, Self-healing hydrogels: Preparation, mechanism and advancement in biomedical applications, Polymers, 13 (2021) 3782.
  8. Z. M. Jose, A. Lourdes, P. Myriam, R. Loganathan, M. C. Laura, C. Claire, O. Irene, S. N. Maria, P.C. Leonor, P.L. Antonio, M. M. Alejandro, R. Pilar, P,T. Beatriz, R. Ana, Water-soluble and potent collagenase inhibitor decreases MMP13 activity in human osteosarcoma cells, International Journal of Molecular Sciences, 22, (2021) 9976.
  9. P. Hameed, C. F. Liu, R. Ummethala, N. Singh, H. H. Huang, G. Manivasagam, K. G. Prashanth, Biomorphic porous Ti6Al4V gyroid scaffolds for bone implant applications fabricated by selective laser melting, Progress in Additive Manufacturing, 6 (2021) 455.
  10. R. Saonli, R. Loganathan, N. Assia, K. Christiane, P. Vanessa, K. Simon, F. Stefano, P. Malay, G. Gilles, Synthesis and biological evaluation of metallocene-tethered peptidyl inhibitors of CDC25, Organometallics, 40, (2021) 2716–2723.
  11. S. Singh, A. N. Jinoop, I. A. Palani, C. P. Paul, K. P. Tomar, K. G. Prashanth, Microstructure and mechanical properties of NiTi-SS bimetallic structures built using Wire Arc Additive Manufacturing, Materials Letters, 303 (2021) 130499.
  12. C. Kalirajan, A. Dukle, A. J. Nathanael, T. H. Oh, G. Manivasagam, A Critical Review on Polymeric Biomaterials for Biomedical Applications, Polymers, 13 (2021) 3015.
  13. G. J. Thangamani, K. Deshmukh, T. Kovářík, N. A. Nambiraj, D. Ponnamma, K. K. Sadasivuni, H. P. S. Abdul Khalil, S. K. K. Pasha, Graphene oxide nanocomposites-based room temperature gas sensors: A review, Chemosphere, 280 (2021) 13064.
  14. N. Singh, S. Acharya, K. G. Prashanth, K. Chatterjee, S. Suwas, Ti6Al7Nb-based TiB-reinforced composites by selective laser melting, Journal of Materials Research, 36 (2021) 3691.
  15. K. Praveenkumar, S. Swaroop, G. Manivasagam, Effect of multiple laser peening on microstructural, fatigue and fretting-wear behaviour of austenitic stainless steel, Surface and Coatings Technology, 443 (2022) 128611.
  16. Dukle, M. Dhanashree, A. J Nathanael, R. Loganathan, T. H. Oh, 3D printed Bioactive glass Polymer composites for Bone Tissue Engineering: A short perspective, Polymers, 14 (2022) 1627.
  17. V. C. Vinay, D. S. Varma, M. R. Chandan, P. Sivabalan, A. K. Jaiswal, S. Swetha, B. Kaczmarek, A Sionkowska, Study of silver nanoparticle-loaded auxetic polyurethane foams for medical cushioning applications, Polymer Bulletin, 79 (2022) 4233.
  18. R. Whenish, S. Ramakrishna, A. K. Jaiswal, G. Manivasagam, A framework for the sustainability implications of 3D bioprinting through nature-inspired materials and structures, Bio-Design and Manufacturing, 5 (2022) 412.
  19. X. C. Ju, H. Chai, S. Krishnan, A. Jaisankar, M. Ramalingam, L. Zhang, Effect of remnant-preserving reconstruction of acute anterior cruciate ligament injuries in a rabbit model: histological and biomechanical analysis, Journal of Biomaterials and Tissue Engineering, 12 (2022) 897.
  20. P. Chaitanya, R. Goud, R. Raghavan, M. Ramakrishna, K. G. Prashanth, S. Gollapudi, Hardness, corrosion behavior, and microstructural characteristics of a selective laser melted 17-4 PH steel, Corrosion 78 (2022) 465.
  21. J. Vishnu, G. Manivasagam, N. Rao, H. J. Rack, Fatigue and corrosion resistance of low modulus Ti-35Nb-7Zr5Ta-0.35 O beta Ti alloy for orthopedic implant applications, Materials Today Communications, 31 (2022) 103366.
  22. S. Chakraborti, R. R. Paul, M. Pal, J. Chatterjee, R. K. Das, Collagen deposition correlates with loss of Ecadherin and increased p63 expression in dysplastic conditions of oral submucous fibrosis, Medical Molecular Morphology, 55 (2022) 20.
  23. R. Sokkalingam, K. Sivaprasad, N. Singh, V. Muthupandi, P. Ma, Y. D. Jia, K. G. Prashanth, Subtle change in the work hardening behavior of fcc materials processed by selective laser melting, Progress in Additive Manufacturing, 7 (2022) 453.
  24. S. Benjamin, V. Remya, N. A. Nambiraj, S. Nayak, Evaluation of doxorubicin loaded gelatin coated iron oxide nanoparticles for drug delivery and magnetic hyperthermia for anti-cancer treatment, Trends in Biomaterials & Artificial Organs, 36 (2022) 3.
  25. V. C. Vinay, D. S. M. Varma, Compression strength and taguchi l9 design of auxetic polyurethane foams for rehabilitation applications, Trends in Biomaterials and Artificial Organs, 36 (2022) 31.
 
2021
  1. High resolution combinatorial 3D printing of gelatin based biomimetic triple-layered conduits for nerve tissue engineering. Liu S, Sun L, Zhang H, Hu Q, Wang Y, Ramalingam M. International Journal of Biological Macromolecules, 0141-8130,2021.
  2. Tailoring biocompatibleTi-Zr-Nb-Hf-Si metallic glasses based on high-entropy alloys design approach. Mariana Calin, JithinVishnu, Pramote Thirathipviwat, Monica Mihaela Popa, Maria Krautz, Geetha Manivasagam, Annett Gebert. Materials Science and Engineering: C, 9284931, 2021.
  3. In situ differentiation of human induced pluripotent stem cells into functional cardiomyocytes on a coaxial PCL-gelatin nanofibrous scaffold. Sridharan Divya, Arunkumar Palaniappan, Britani N.Blackstone, Julie A.Dougherty, Naresh Kumar, Polani B . Seshagiri, Nazish Sayed, Heather M Powell, and Mahmood Khan. Materials Science and Engineering: 111354, 2021.
  4. Effect of substrate plate heating on the microstructure and properties of selective laser melted Al-20Si-5Fe- 3Cu-1Mg Alloy. Ma P., Ji P., Jia Y., Shi X., Yu Z., Prashanth K.G. Materials: 330, 2021.
  5. Nanoparticles and their biomedical applications. Ojo O.A., Olayide I.I., Akalabu M.C., Ajiboye B.O., Ojo A.B., Oyinloye B.E., Ramalingam M. Biointerface Research in Applied Chemistry: 8431-8445, 2021.
  6. Surface Modification and Biological Approaches for Tackling Titanium Wear-Induced Aseptic Loosening. Vishnu J., Manivasagam G. Journal of Bio and Tribo-Corrosion: 1-19, 2021.
  7. Application of poly-ε-caprolactone in extrusion-based bioprinting. Borkar T., Goenka V., Jaiswal A.K. Bioprinting: e00111, 2021.
  8. Characterization of alginate-capped nanosilver by fractal and entropy analysis on its transmission electron microphotographs. A Damle, S Muthusamy, R Nag, RK Das, P Srivastava. Micron, 102963, 2021.
  9. Chemiresistive gas sensors based on vanadium pentoxide reinforced polyvinyl alcohol/polypyrrole blend nanocomposites for room temperature LPG sensing. G. J. ThangamaniKalim DeshmukhS. K. Khadheer Pasha. Synthetic Metals: 116687, 2021
  10. Single-step hydrothermal synthesis of nitrogen-doped ZnO nanostructures and  an insight into its electrochemical properties. Alisha Mary Manoj, Leema Rose Viannie, Chittur Krishnaswamy Subramaniam, Narayanasamy Arunai Nambi Raj, Geetha Manivasagam. Journal of Material Research: 350-60, 2021.
  11. Spark plasma sintering of molybdenum silicides synthesized from oxide precursors. Ovalı D., Tarraste M., Kaba M., Ağaoğulları D., Kollo L., Prashanth K.G., Lütfi Öveçoğlu M. Ceramics International: 13827-36, 2021.
  12. Selective laser melting of Cu-Ni-Sn: A comprehensive study on the microstructure, mechanical properties, and deformation behavior. Zhao C., Wang Z., Li D., Kollo L., Luo Z., Zhang W., Prashanth K.G. International Journal of Plasticity: 102926, 2021.
  13. Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements. Xi L., Ding K., Gu D., Guo S., Cao M., Zhuang J., Lin K., Okulov I., Sarac B., Eckert J., Prashanth K.G. Journal of Alloys and Compounds: 159436, 2021.
  14. Physical and self–crosslinking mechanism and characterization of chitosan-gelatin-oxidized guar gum hydrogel. Maiti S., Khillar P.S.,Mishra D., Nambiraj N.A., Jaiswal A.K. Polymer Testing: 107155, 2021.
  15. The impact resistance of highly densified metal alloys manufactured from gas-atomized pre-alloyed powders. Rahmani R., Antonov M., Prashanth K.G. Coatings: 216, 2021.
  16. Encapsulation of calcium phosphates on electrospun nanofibers for tissue engineering applications. Nathanael A.J., Oh T.H. Crystals: 199, 2021.
  17. Phase formation, microstructure and mechanical properties of mg67 ag33 as potential biomaterial. Kosiba K., Prashanth K.G., Scudino S. Metals: 461,2021.
  18. Topological Structure Design and Fabrication of Biocompatible PLA/TPU/ADM Mesh with Appropriate Elasticity for Hernia Repair. Hu Q., Zhang R., Zhang H., Yang D., Liu S., Song Z., Gu Y., Ramalingam M. Macromolecular Bioscience: 2000423, 2021.
  19. Electromagnetic Interference Shielding Characteristics of SrTiO3 Nanoparticles Induced Polyvinyl Chloride and Polyvinylidene Fluoride Blend Nanocomposites. Jenifer Joseph, Kalim Deshmukh, Arunai Nambi Raj, SK.Khadheer Pasha. Journal of Inorganic and Organometallic Polymers and Materials:2021.
  20. Cardiac Differentiation of Mesenchymal Stem Cells: Impact of Biological and Chemical Inducers. Ramesh S., Govarthanan K., Ostrovidov S., Zhang H., Hu Q., Camci-Unal G., Verma R.S., Ramalingam M. Stem Cell Reviews and Reports: 1-9, 2021.
  21. Additive Manufacturing of Aluminum Based Metal Matrix Composites—A Review. Tang S., Ummethala R., Suryanarayana C., Eckert J., Prashanth K.G., Wang Z. Advanced Engineering Materials: 2100053, 2021.
  22. Annealing of Al-Zn-Mg-Cu Alloy at high pressures: Evolution of microstructure and the corrosion behavior. Suo C., Ma P., Jia Y., Liu X., Shi X., Yu Z., Prashanth K.G. Materials: 2076, 2021.
  23. Ti6Al7Nb-based TiB-reinforced composites by selective laser melting. Singh N., Acharya S., Prashanth K.G., Chatterjee K., Suwas S. Journal of Materials Research: 2021.
  24. High-Surface-Energy Nanostructured Surface on Low-Modulus Beta Titanium Alloy for Orthopedic Implant Applications. Vishnu J., Manivasagam G. Journal of Materials Engineering and Performance: 2021.
  25. An overview of bio-actuation in collagen hydrogels: a mechanobiological phenomenon. Hameed P., Manivasagam G. Biophysical Reviews: 1-7, 2021.
  26. A novel photocrosslinked phosphate functionalized Chitosan Sr5(PO4)2SiO4 composite hydrogels and in vitro biomineralization, osteogenesis, angiogenesis for bone regeneration application. Chen Y., Udduttula A., Xie X., Zhou M., Sheng W., Yu F., Weng J.,
    Wang D., Teng B., Manivasagam G., Zhang J.V., Ren P.-G., Kang B., Zeng H. Composites Part B: Engineering: 109057, 2021.
  27. Texture dependent strain hardening in additively manufactured stainless steel 316L. Kumar D., Shankar G., Prashanth K.G., Suwas S. Materials Science and Engineering A: 141483, 2021.
  28. In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr- 5Ta. Ummethala R., Jayaraj J., Karamched P.S., Rathinavelu S., Singh N., Surreddi K.B., Prashanth K.G. Journal of Materials Engineering and Performance: 1-2,2021.
  29. Graphene oxide nanocomposites based room temperature gas sensors:A review. GJ Thangamani, K Deshmukh, T Kovářík, NA Nambiraj. Chemosphere: 130641, 2021.
2020
  1. Linear Patterning of high entropy alloy by additive manufacturing. Karimi J, Ma P, Jia YD, Prashanth KG. Manufacturing Letters, 2213-8463, 2020.
  2. Microstructure and Mechanical Property of bimodal – size metallic glass particle – reinforced Al alloy matrix composites. Xie MS, Wang Z, Zhang GQ, Yang C, Zhang WW, Prashanth KG. Journal of Alloys and Compounds, 0925-8388, 2020.
  3. Premature failure of an additively manufactured material. Zhi Wang, Meishen Xie, Yuanyuan Li, Weiwen Zhang, Chao Yang, Lauri Kollo, Jurgen Eckert, Kond Gokuldoss Prashanth. NPG Asia Materials, 1884 – 4057, 2020.
  4. Role of impinging powder particles on melt pool hydrodynamics, thermal behavior and microstructure in laser – assisted DED process: A particle – scale DEM – CFD – CA approach. Akash Aggarwal, Arvind Chouhan, Sushil Patel, Yadav DK, Arvind Kumar, Vinod AR, Prashanth KG, Gurao NP. International Journal of Heat and Mass Transfer, 0017-9310, 2020.
  5. Solidification of Al – xCualloy under high pressure. Liu X, Ma P, Jia YD, Wei ZJ, Suo CJ, Ji PC, Shi XR, Yu ZS, Prashanth KG. Journal of Materials Research and Technology, 2238-7854, 2020.
  6. Thermal Expansion behavior of Al – xSi alloys fabricated using selective laser melting. Jia YD, Zhang LB, Ma P, Scudino S, Wang G, Yi J, Eckert J, Prashanth KG. Process in Additive Manufacturing, 2363-9512, 2020.
  7. Translatable gene therapy for lung cancer Crispr CAS9 – an exploratory review. Jishnu Nair, Abhishek Nair, Soundaram Veerappan, Dwaipayan Sen. Cancer Gene Therapy, 1476-5500,2020.
  8. Viral Vector: Potential Therapeutic for glioblastoma multiforme. Ceera Manikandan, Akshita Kaushik, Dwaipayan Sen. Cancer Gene Therapy, 1476-5500, 2020
  9. Comprehending the Unfolded Protein Response as a Conduit for Improved Mesenchymal Stem Cell- Based Therapeutics. Madhubanti Mullick, Sunita Nayak. Regenerative Engineering and Translational Medicine, 23644133, 2020.
  10. Fabrication techniques of biomimetic scaffolds in three dimensional cell culture: A review. Anjana K Badekila, Sudarshan Kini, Amit K Jaiswal. Journal of Cellular Physiology, 1097-4652, 2020.
  11. Selective laser melting of nanostructured Al-Y-Ni-Co alloy. Wang Z, Scudino S, Eckert J, Prashanth KG. Manufacturing Letters, 2213-8463, 2020.
  12. Antimicrobial activity of Chemical, Thermal and Green Route – Derived Zinc Oxide Nanoparticles: A Comparative Analysis. Mideksa Kasahun, Alemayhu Yadate, Abebe Belay, Zerihun Belay, Murugan Ramalingam. Nano Biomedicine and Engineering, 2020.
  13. Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC-NiCr Cermet. Atefeh Aramian, Zohreh Sadeghian, Seyed Mohammad Javad Razavi, Konda Gokuldoss Prashanth, Flippo Berto. Ceramics International, 0272-8842, 2020.
  14. Electron-beam welding of high entropy alloy and stainless steel: microstructure and mechanical properties. Sokkalingam R, Mastanaiah P, Muthupandi V, Sivaprasad K, Prashanth KG. Materials and Manufacturing Processes, 1042694, 2020.
  15. Frictional Wear and Corrosion Behavior of AlCoCrFeNi High-Entropy Alloy Coatings Synthesized by Atmospheric Plasma Spraying. Mu Y, Zhang L, Xu L, Prashanth K, Zhang N, Ma X, Jia Y, Xu Y, Jia Y, Wang G. Entropy, 1099-4300,2020.
  16. Selective laser manufacturing of Ti based alloys and Composites: Impact of process parameters, applications trends, and future prospects. Singh N, Hameed P, Ummethala R, Manivasagam G, Prasanth KG, Eckert J. Materials Today Advances, 25900498, 2020.
  17. A review of particulate – reinforced aluminum matrix composites fabricated by selective laser melting. Pei WA, Eckert J, Prashanth KG, Wu MN, Kaban I, Xi LX, Scudino S. Transactions of Nonferrous Metals Society of China, 1003-6326, 2020.
  18. Dental Pulp Stem Cells in Neuroregeneration. Mohan SP, Ramalingam M. Journal of Pharmacy and Bioallied Sciences,0975-7406,2020.
  19. Exosomes in the oral and maxillofacial region. Lakshmi JS, Nallusamy J, Manivasagam G, Ramalingam M, Sunil PM, Tom A. Journal of Pharmacy and Bioallied Sciences, 0975-7406,2020.
  20. Scalable Biomimetic Coaxial Aligned Nanofiber Cardiac Patch: A Potential Model for “Clinical Trials in a Dish”. Naresh Kumar, Divya Sridharan, Arunkumar Palaniappan, Julie A Dougherty, Andras Czirok, Dona Greta Isai, Muhamad Mergaye, Mark G Angelos, Heather M Powell, Mahmood Khan. Frontiers in Bioengineering and Biotechnology, 2296-4185, 2020.
  21. Epithelial Distribution of E-Cadherin, p63 and Mitotic figures in Apotome images to determine the Oncogenic Potentiality of Oral Submucous Fibrosis. Reetoja Nag, Ranjan Rashmi Paul, Mousumi Pal, Jyotirmoy Chatterjee and Raunak Kumar Das. Microscopy and Microanalysis, 1435-8115, 2020.
  22. Small Molecule – Mediated Enhanced Osteogenesis of Human Mesenchymal Stem Cells: a Probable Alternate for BMP-2. Regenerative Engineering and Translational Medicine, 23644133, 2020.
  23. Therapeutic Potential of Mesenchymal Stem Cells in treating both types of Diabetes Mellitus and associated diseases. Goenka V, Borkar T, Desai A, Das RK. Journal of Diabetes and Metabolic Disorders, 2251-6581, 2020.
  24. Grain refinement in laser manufactured Al-based composites with TiB2 Ceramic. Xi L, Gu D, Guo S, Wang R, Ding K, Prashanth KG. Journal of Materials Research and Technology, 2238-7854,2020.
  25. 3D printing assisted combinatorial approach for designing mechanically- tunable and vascular supportive nanofibrous membranes to repair perforated eardrum. Suihong Liu, Zirong Huo, Qingxi Hu, Murugan Ramalingam. Journal of Applied Polymer Science, 0021-8995, 2020
  26. Selective laser melting of high-strength, low modulus Ti-35Nb-7Zr-5Ta alloy. Raghunandan Ummethala, Phani S Karamched, Sokkalingam Rathinavelu, Neera Singh, Akash Aggarwal, Kang Sun, Eugene Ivanov, Lauri Kollo, Ilya Okulov, Jurgen Eckert, Prashanth KG. Materialia, 2589-1529, 2020.
  27. Aluminum matrix composites reinforced with metallic glass particles with core-shell structure. Guan HD, Li CJ, Gao P, Prashanth KG, Tan J, Eckert J, Tao JM, Yi JH. Materials Science and Engineering, 0921-5093,2020.
  28. Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders. Chao Zhao, Zhi Wang, Daoxi Li, Meishen Xie, Lauri Kollo, Zongqiang Luo, Weiwen Zhang, Konda Gokuldoss Prashanth. Journal of Alloys and Compounds, 0925-8388, 2020.
  29. Creep and high temperature fatigue performance of as build selective laser melted Ti-based 6Al-4V titanium alloy. Luigi Mario Viespoli, Steffano Bressan, Takamoto Itoh, Noritake Hiyoshi, Konda Gokuldoss Prashanth, Filippo Berto. Engineering Failure Analysis, 1350-6307, 2020.
  30. High Pressure torsion induced lowering of Young’s modulus in high strength TNZT alloy for bio-implant applications. Maity T, Balci C, Gammer O, Ivanov E, Eckert J, Prashanth KG. Journal of the Mechanical Behavior of Biomedical Materials, 1751-6161, 2020.
  31. Superhydrophilic nanostructured surfaces of beta Ti29Nb alloy for cardiovascular stent applications. Jithin Vishnu, Mariana Calin, Stefan Pilz, Annett Gebert, Beata Kaczmarek, Marta Michalska-Sionkowska, Volker Hoffmann, Geetha Manivasagam. Surface and Coatings Technology, 125965, 2020.
  32. Heat Treatment of Metastable Beta Titanium Alloys. SR Soundararajan, J Vishnu, G Manivasagam, NR Muktinutalapati. Metal Heat Treatments, IntechOpen, 2020.
  33. Surface mechanical attrition treatment of low modulus Ti-Nb-Ta-O alloy for orthopedic applications. Srijan Acharya, Arpana Gopi Panicker, Vasanth Gopal, Shaurya Singh Dabas, Geetha Manivasagam, Satyam Suwas, Kaushik Chatterjee. Materials Science and Engineering: C 110, 110729, 2020.
  34. Effect of phase transformations during aging on tensile strength and ductility of metastable beta titanium alloy Ti–35Nb–7Zr–5Ta-0.35 O for orthopedic applications. Jithin Vishnu, Magesh Sankar, HJ Rack, Nageswara Rao, AK Singh, Geetha Manivasagam. Materials Science and Engineering: A 779, 139127, 2020.
  35. Enhanced biocorrosion resistance and cellular response of a dual phase high entropy alloy through reduced elemental heterogeneity. M Pole, HS Grewal, HS Arora, H Singh, S Mukherjee, G Manivasagam, LVK Reddy, G Perumal. ACS Applied Bio Materials 3 (2), 1233-1244, 2020.
  36. Wear–Corrosion synergistic effect on Ti–6Al–4V alloy in H2O2 and albumin environment. V Gopal, G Manivasagam, Journal of Alloys and Compounds, 154539, 2020.
  37. Biopolymers for hydrogels in cosmetics. Stanisław Mitura, Alina Sionkowska, Amit Jaiswal. Journal of Materials Science: Materials in Medicine 31, 1-14, 2020.
  38. Effect of interpolymer complex formation between chondroitin sulfate and chitosan-gelatin hydrogel on physicochemical and rheological properties. S Ponsubha, Amit Kumar Jaiswal. Carbohydrate Polymers, 116179, 2020.
  39. Crosslinking of gum-based composite scaffolds for enhanced strength and stability: A comparative study between sodium trimetaphosphate and glutaraldehyde. Mugdha Makrand Joglekar, Devlina Ghosh, Dhivyaa Anandan, Puja Yatham, Rahul Dev Jayant, N. Arunai Nambiraj, Amit Kumar Jaiswal. Journal of Biomedical Materials Research: Part B Applied Biomaterials, 1-8, 2020.
  40. Peram Lokanatha Reddy, Kalim Deshmukh, Tomas Kovarik, Narayanasamy Arunai Nambi Raj and Khadheer Pasha Shaik, Green chemistry mediated synthesis of cadmium sulphide/polyvinyl alcohol nanocomposites:Assessment of of microstructural, thermal and dielectric properties, Polymer composites, 2020,1-14.
  41. Valarmathi Narayanan Shanmugam Sumathi Arunai Nambi Raj Narayanasamy, Tricomponent composite containing copper–hydroxyapatite/chitosan/polyvinyl pyrrolidone for bone tissue engineering, Journal of Biomedical Materials Research Part A, April 2020
  42. M. K. Mohanapriya, Kalim Deshmukh, Jaroslav Kadlec, Kishor Kumar Sadasivuni, Muhammad Faisal, N. A. Nambi Raj & S. K. Khadheer Pasha, Dynamic mechanical analysis and broadband lectromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites, Polymer-Plastics Technology and Materials, Volume 59, 2020 – Issue 8
  43. K.Venkatesan, C.J.Raphael, k.M.Varghese, P.Gopu, S.Sivakumar, M.Boban, N.A.N.Raj, K.Senthilnathan, P.Ramesh Babu, Volume and dosimetric analysis of rectum and bladder for prostate carcinoma patients by using kilo voltage cone beam computed tomography (CBCT), International Journal of Radiation Research, 2020, 18
2019
SL.NOPUB YEARAUTHORSPAPER TITLEJOURNAL NAMEISSN NOVOL NOISSUE NOB PAGEE PAGE
12019Madhubanti Mullick, Srijita Banerjee, Dwaipayan SenAmelioration of acetominophen induced liver injury via delta opioid receptor – Activated human mesenchymal stem cells – an in vivo approachRegenerative Medicine and Translational Medicine2364413353263269
22019Deepti Rana, Sanjay Kumar, Thomas J Webster, Murugan RamalingamImpact of Induced Pluripotent Stem Cells in Bone Repair and RegenerationCurrent Osteoporosis Reports1544-2241174226234
32019Parthiban C, Pavithra M, Vinod Kumar Reddy L, Dwaipayan Sen, Pradeep Singh NDSingle – Component Fluorescent Organic Nanoparticle with Four-Armed Phototriggers for Chemo- Photodynamic Therapy and Cellular ImagingApplied Nanomaterials2574-09702637283734
42019Aakash Reddy, Katari Venkatesh, Sayani Sahu, Pallavi Sinha Roy, Konkona Datta, Pearlin, L Vinod Kumar Reddy, Erfath Thanjeem Begum Moghal, Madhubanti Mullick, Gundu H R Rao, Dwaipayan SenIntron – Specific single nucleotide Polymorphisms of fat mass and obesity – Associated Gene in Obese and Overweight Individuals of the Indian Adult Population – A Pilot StudyCurrent Diabetes Review1875-64171618494
52019Amit Jaiswal Dhivyaa Anandana, G.Madhumathi, N. Arunai NambirajGum based 3D composite scaffolds for bone tissue engineering applicationsCarbohydrate Polymers0144-86172142146270
62019C. Pavithra, W. Madhuri, S. Roopas Kiran, N. Arunai Nambi Raj, K. V. Siva KumarElastic and Anelastic Behavior of Microwave Sintered BCT-BST CeramicsInternational Journal of Engineering and Advanced Technology (IJEAT)224991S3392396
72019Lickmichand M  , Crystal Sara Shaji  , Valarmathi N  , Amy Sarah Benjamin  , Arun Kumar R K  , Sunita Nayak  , Radha Saraswathy  , Sumathi S  , Arunai Nambi Raj NIn vitro biocompatibility and hyperthermia studies on synthesized cobalt ferrite nanoparticles encapsulated with polyethylene glycol for biomedical applicationsMaterials Today: Proceedings2214-7853155252261
82019 Fraction specific post treatment quality assurance for active breath hold radiation therapyJournal of Radiotherapy in Practice1460-3969  19
92019Srijan Acharya, Sumit Bahl, Shaurya Singh Dabas, Suhail Hassan, Vasanth Gopal, Arpana Gopi Panicker, Geetha Manivasagam, Satyam Suwas, Kaushik ChatterjeeRole of aging induced α precipitation on the mechanical and tribocorrosive performance of a β Ti-Nb-Ta-O orthopedic alloyMaterials Science and Engineering: C11031109755109755
102019Jithin Vishnu, Vignesh Kannigaipair Manivasagam, Vasanth Gopal, Caterina Bartomeu Garcia, Pearlin Hameed, Geetha Manivasagam, Thomas J WebsterHydrothermal treatment of etched titanium: A potential surface nano-modification technique for enhanced biocompatibilityNanomedicine: Nanotechnology, Biology and Medicine1549-9642201102016102016
112019Vasanth Gopal, Sneha Goel, Geetha Manivasagam, Shrikant JoshiPerformance of Hybrid Powder-Suspension Axial Plasma Sprayed Al2O3—YSZ Coatings in Bovine Serum SolutionMaterials31207880121219221922
122019K Venkatesh, SK Ghosh, M Mullick, G Manivasagam, D SenSpinal cord injury: pathophysiology, treatment strategies, associated challenges, and future implicationsCell and Tissue Research310658013772125151
132019Revathi A, Das Mitun, Vamsi K. Ballab, Sen Dwaipayan, Devika D, Geetha ManivasagamSurface properties and cytocompatibility of Ti-6Al-4V fabricated using Laser Engineered Net ShapingMaterials Science & Engineering C309480441002019104116
142019A Revathi, Mitun Das, Vamsi K Balla, , D Devika, Dwaipayan Sen, Geetha ManivasagamSurface engineering of LENS-Ti-6Al-4V to obtain nano- and micro-surface topography for orthopedic applicationNanomedicine: Nanotechnology, Biology, and Medicine30844575181157168
152019Hameed P., Gopal V., Bjorklund S., Ganvir A., Sen D., Markocsan N., Manivasagam G.Axial Suspension Plasma Spraying: An ultimate technique to tailor Ti6Al4V surface with HAp for orthopaedic applicationsColloids and Surfaces B: Biointerfaces0927-7765173 806815
162019Saravanan S., Vimalraj S., Thanikaivelan P., Banudevi S., Manivasagam G.A review on injectable chitosan/beta glycerophosphate hydrogels for bone tissue regenerationInternational Journal of Biological Macromolecules0141-8130121 3854
172019Rajan S.S., Manivasagam G., Ranganathan M., Swaroop S.Influence of laser peening without coating on microstructure and fatigue limit of Ti-15V-3Al-3Cr-3SnOptics and Laser Technology0030-3992111 481488
182019SS Rajan, S Swaroop, G Manivasagam, MN RaoFatigue Life Enhancement of Titanium Alloy by the Development of Nano/Micron Surface Layer Using Laser PeeningJournal of Nanoscience and Nanotechnology31039859191170647073
192019Reetoja Nag, Mousumi Pal, Ranjan Rashmi Paul, Jyotirmoy Chatterjee, Raunak Kumar. DasSegmentation and analysis of surface characteristics of oral tissues obtained by scanning electron microscopy to differentiate normal and oral precancerous conditionTissue and Cell0040-81665908287
202019Arunima Rajan S, Ahmaduddin Khan, Syed Asrar, Hasan Raza, Raunak Kumar Das, Niroj Kumar SahuSynthesis of ZnO/Fe3O4/rGO Nanocomposites and Evaluation of Antibacterial Activities towards E. coli and S. aureus.IET Nanobiotechnologyxxxxxxxxxxxx18
212019Sushma Tejwani, M Francis, S Dinakaran, V Kamath, B Tilva, RK Das, R Shetty, AS RoyInfluence of Anterior Biometry on Corneal Biomechanical Stiffness of Glaucomatous eyes Treated with Chronic Medication or Filtration Surgery.Journal of glaucoma0000o
222019Amit Jaiswal Dhivyaa Anandana, G.Madhumathi, N. Arunai NambirajGum based 3D composite scaffolds for bone tissue engineering applicationsCarbohydrate Polymers0144-86172142146270
232019Madhubanti Mullick and Sunita NayakResponse as a Conduit for Improved Mesenchymal Stem Cell-Based TherapeuticsRegenerative Engineering and Translational Medicine2364-413300110
242019Hameed P, Gopal V, Bjorklund S, Ganvir A, Sen D, Markocsan N, Manivasagam G.Axial Suspension Plasma Spraying: An ultimate technique to tailor Ti6Al4V surface with HAp for orthopaedic applicationsColloids Surf B Biointerfaces0927-7765173Jan806815
252019Durai Murugan Muniswami, L Vinod Kumar Reddy, Katari Venkatesh, Sandhya Babu, Dwaipayan SenNeuropotency and Neurotherapeutic Potential of Human Umbilical Cord Stem Cell’s SecretomeRegenerative Engineering and Translational Medicine2364-4133xxMarch115
262019Reddy A, Venkatesh K, Sahu S, Roy PS, Datta K, Pearlin, Reddy LVK, Moghal ETB, Mullick M, Rao GHR, Sen D.Intron-specific Single Nucleotide Polymorphisms of Fat Mass and Obesity-Associated Gene in obese and overweight individuals of the Indian adult population- A pilot study.Curr Diabetes Rev.1573-399826Nov115
272019Venkatesh K, Ghosh SK, Mullick M, Manivasagam G, Sen D.Spinal cord injury: pathophysiology, treatment strategies, associated challenges, and future implicationsCell and Tissue Research0302-766X11June127
282019Venkatesh K, Kumari A, Sen D.MicroRNA signature changes during induction of neural stem cells from human mesenchymal stem cellsNanomedicine1549-963417Supple94105
292019Pearlin, Nayak S, Manivasagam G, Sen D.Progress of Regenerative Therapy in OrthopedicsCurrent Osteoporosis Reports1544-1873162169181
302019A Revathi, Das M, Balla VK, D Devika, Sen D, Manivasagam G.Surface engineering of LENS-Ti-6Al-4V to obtain nano- and micro-surface topography for orthopedic applicationNanomedicine1549-963418Supple157168
312019A Revathi, Mitun D, Balla VK, Sen D, Devika D, Manivasagam G.Surface properties and cytocompatibility of Ti-6Al-4V fabricated using Laser Engineered Net Shaping.Mater Sci Eng C Mater Biol Appl0928-4931100JUl104116
322019Baul HS, Manikandan C, Sen D.Cannabinoid receptor as a potential therapeutic target for Parkinsons Disease.Brain Research Bulletin0361-9230146Mar244252
332019Thanjeem Begum ME, Baul HS, Venkatesh K, Sen DNovel miRNA expression in the delta opioid signaling pathway mediated cell survivability in an in vitro model of ER stressNanomedicine1549-963417Supple150187
342019Reddy LVK, Sen DRegulation of Cardiomyocyte Differentiation, Angiogenesis, and Inflammation by the Delta Opioid Signaling in Human Mesenchymal Stem CellsRegenerative Engineering and Translational Medicine2364-4141xxJan111
352019V. Chaitanya Vinay and D. S. Mohan VarmaFabrication and testing of Auxetic foams for Rehabilitation ApplicationsJournal of the Indian Institute of Science0970-4140993511518
2018
SL.NOPUB YEARAUTHORSPAPER TITLEJOURNAL NAMEISSN NOVOL NOISSUE NOB PAGEE PAGE
12018Rajamanickam, T.; Muthu, S.; Murugan, P.; Pathikonda, M.; Senthilnathan, K.; Raj, N. Arunai Nambi; Babu, P. RameshStudy of Dosimetric Properties of Flattened and Un-Flattened Mega Voltage X-Ray Beam on High Z Implant MaterialsMedical Physics0094-2405456E308E308
22018Thangamani G.J., Deshmukh K., Chidambaram K., Ahamed M.B., Sadasivuni K.K., Ponnamma D., Faisal M., Nambiraj N.A., Pasha S.K.K.Influence of CuO nanoparticles and graphene nanoplatelets on the sensing behaviour of poly(vinyl alcohol) nanocomposites for the detection of ethanol and propanol vaporsJournal of Materials Science: Materials in Electronics0957-452229651865205
32018Rajamanickam, T.; Muthu, S.; Murugan, P.; Pathikonda, M.; Senthilnathan, K.; Raj, N. Arunai Nnambi; Babu, P. RameshStudies on Fundamental Interaction Parameters For Stainless Steel And Titanium Using Flattened And Un-Flattened Mega Voltage X-Ray BeamMedical Physics0094-2405456E302E302
42018 Quantitative Radiomic Phenotyping of Cervix CancerINTERNATIONAL CLINICAL PATHALOGY JOURNAL2471-0016622628
52018Anandan D., Mary Stella S., Arunai Nambiraj N., Vijayalakshmi U., Jaiswal A.K.Development of mechanically compliant 3D composite scaffolds for bone tissue engineering applicationsJournal of Biomedical Materials Research – Part A1549-32961061232673274
62018Sathish S., Ramkumar S., Geetha M.Drilling performances and wear characteristics of coated drill bits during drilling reinforced concreteInternational Journal of Applied Ceramic Technology1546-542X  ––
72018Pearlin., Nayak S., Manivasagam G., Sen D.Progress of Regenerative Therapy in OrthopedicsCurrent Osteoporosis Reports1544-1873162169181
82018Nag R., Raza H., Kumar S., Seal R., Banerjee A., Paul R.R., Pal M., Chatterjee J., Das R.K.Detection and analysis of abnormal nuclear changes in oral cytological smears by Papanicolaou stainingCytopathology0956-5507291112114
92018Nag R., Kumar Das R.Analysis of images for detection of oral epithelial dysplasia: A reviewOral Oncology1368-837578 815
102018Anandan D., Mary Stella S., Arunai Nambiraj N., Vijayalakshmi U., Jaiswal A.K.Development of mechanically compliant 3D composite scaffolds for bone tissue engineering applicationsJournal of Biomedical Materials Research – Part A1549-32961061232673274
112018Anandan D., Jaiswal A.K.Synthesis and characterization of human bone-like hydroxyapatite using Schiff’s baseCeramics International0272-884244894019407
122018Pearlin , Nayak S , Manivasagam G , Sen DProgress of Regenerative Therapy in OrthopedicsCurr Osteoporos Rep29488062162169181
132018Veerachamy S, Hameed P, Sen D, Dash S, Manivasagam G.Studies on Mechanical, Biocompatibility and Antibacterial Activity of Plasma Sprayed Nano/Micron Ceramic Bilayered Coatings on Ti-6Al-4V Alloy for Biomedical ApplicationJ Nanosci Nanotechnol1533-488018745154523
142018Mullick M, Sen DThe Delta Opioid Peptide DADLE Represses Hypoxia-Reperfusion Mimicked Stress Mediated Apoptotic Cell Death in Human Mesenchymal Stem Cells in Part by Downregulating the Unfolded Protein Response and ROS along with Enhanced Anti-Inflammatory EffectStem Cell Reviews and Reports1550-8943144558573
152018Begum M ET, Sen DDOR agonist (SNC-80) exhibits anti-parkinsonian effect via downregulating UPR/oxidative stress signals and inflammatory response in vivoNeuroscience Letters0304-3940678Jun2936
162018Raina R, Sen DCan crosstalk between DOR and PARP reduce oxidative stress mediated neurodegeneration?Neurochem Int.0197-0186112Jan206218
172018Parthiban C, M P, Reddy LVK, Sen D, Samuel S M, Singh NDP.Tetraphenylethylene conjugated p-hydroxyphenacyl: fluorescent organic nanoparticles for the release of hydrogen sulfide under visible light with real-time cellular imaging.Org Biomol Chem1477-0520164279037909
182018C. ParthibanPavithra M.Vinod Kumar Reddy L.Dwaipayan Sen, Melvin Samuel S, N. D. Pradeep SinghVisible-Light -Triggered Fluorescent Organic Nanoparticles for Chemo-Photodynamic Therapy with Real-Time Cellular ImagingACS Applied Nano Materials2574-097011162816288
192018Rajasekaran S, Thatte J, Periasamy J, Javali A, Jayaram M, Sen D, Krishnagopal A, Jayandharan GR, Sambasivan RInfectivity of adeno-associated virus serotypes in mouse testisBMC Biotechnol.1472-67501817078
2017
SL.NOPUB YEARAUTHORSPAPER TITLEJOURNAL NAMEISSN NOVOL NOISSUE NOB PAGEE PAGE
12017Kaliyaperumal, Venkatesan; Raphael, C. Jomon; Varghese, K. Mathew; Gopu, Paul; Sivakumar, S.; Boban, Minu; Raj, N. Arunai Nambi; Senthilnathan, K.; Babu, P. RameshN Study of variation in dose calculation accuracy between kV cone-beam computed tomography and kV fan-Beam computed tomographyJournal of Medical Physics0971-6203423171180
22017Pasha S.K.K., Deshmukh K., Ahamed M.B., Chidambaram K., Mohanapriya M.K., Raj N.A.N.Investigation of Microstructure, Morphology, Mechanical, and Dielectric Properties of PVA/PbO NanocompositesAdvances in Polymer Technology0730-6679363352361
32017Padhye K.P., Murugan Y., Milton R., Raj N.A.N., David K.S.The “skipped segment screw” construct: An alternative to conventional lateral mass fixation-biomechanical analysis in a porcine cervical spine modelAsian Spine Journal1976-1902115733738
42017Das P., Kumar K., Nambiraj A., Rajan R., Awasthi R., Dua K., Himaja M.Potential therapeutic activity of Phlogacanthus thyrsiformis Hardow (Mabb) flower extract and its biofabricated silver nanoparticles against chemically induced urolithiasis in male Wistar ratsInternational Journal of Biological Macromolecules0141-8130103 621629
52017Sigamani A., Nambiraj A.Comparison of surface dose delivered by 7� MV-unflattened and 6� MV-flattened photon beamsReports of Practical Oncology and Radiotherapy1507-1367223243250
62017Velu V., Das M., Raj N A.N., Dua K., Malipeddi H.Evaluation of in vitro and in vivo anti-urolithiatic activity of silver nanoparticles containing aqueous leaf extract of Tragia involucrataDrug Delivery and Translational Research2190-393X73439449
72017Kaviarasu K., Nambi Raj N., Hamid M., Giri Babu A., Sreenivas L., Murthy K.Verification of dosimetric commissioning accuracy of intensity modulated radiation therapy and volumetric modulated arc therapy delivery using task Group-119 guidelinesJournal of Medical Physics0971-6203424258265
82017Geetha M., Asokamani R., Amit Kumar J., Ramalingam M.Mechanical characterization of nanofiber compositesNanofiber Composites for Biomedical Applications–  117155
92017Santhosh R., Geetha M., Nageswara Rao M.Recent Developments in Heat Treatment of Beta Titanium Alloys for Aerospace ApplicationsTransactions of the Indian Institute of Metals0972-281570716811688
102017Sathish S., Geetha M.Effect of Alumina Addition on the Microstructure and Mechanical Properties of Metal Inert Gas Welded Low Carbon SteelTransactions of the Indian Ceramic Society0371-750X763176182
112017Anjaneyulu U., Priyadarshini B., Arul Xavier Stango S., Chellappa M., Geetha M., Vijayalakshmi U.Preparation and characterisation of sol�€“gel-derived hydroxyapatite nanoparticles and its coatings on medical grade Ti-6Al-4V alloy for biomedical applicationsMaterials Technology1066-78573213800814
122017Revathi A., Borrás A.D., Muñoz A.I., Richard C., Manivasagam G.Degradation mechanisms and future challenges of titanium and its alloys for dental implant applications in oral environmentMaterials Science and Engineering C0928-493176 13541368
132017Gopal V., Chandran M., Rao M.S.R., Mischler S., Cao S., Manivasagam G.Tribocorrosion and electrochemical behaviour of nanocrystalline diamond coated Ti based alloys for orthopaedic applicationTribology International0301-679X106 88100
142017Mohanty S., Geetha M.Metallic nanofiber compositesNanofiber Composites for Biomedical Applications–  7994
152017Pulyala P., Singh A., Dias-Netipanyj M.F., Cogo S.C., Santos L.S., Soares P., Gopal V., Suganthan V., Manivasagam G., Popat K.C.In-vitro cell adhesion and proliferation of adipose derived stem cell on hydroxyapatite composite surfacesMaterials Science and Engineering C0928-493175 13051316
162017Deepti rana., Keerthana ramasamy., Maria leena., Renu pasricha., Geetha manivasagam., Murugan ramalingamSurface Functionalization of BiomaterialsBiology and Engineering of Stem Cell Niches–  260341
172017Khanna K., Jaiswal A., Dhumal R.V., Selkar N., Chaudhari P., Soni V.P., Vanage G.R., Bellare J.Comparative bone regeneration study of hardystonite and hydroxyapatite as filler in critical-sized defect of rat calvariaRSC Advances2046-20697603752237533
182017Sensharma P., Madhumathi G., Jayant R.D., Jaiswal A.K.Biomaterials and cells for neural tissue engineering: Current choicesMaterials Science and Engineering C0928-493177 13021315
192017Chaudhuri R., Ramachandran M., Moharil P., Harumalani M., Jaiswal A.K.Biomaterials and cells for cardiac tissue engineering: Current choicesMaterials Science and Engineering C0928-493179 950957
202017Kashte S., Jaiswal A.K., Kadam S.Artificial Bone via Bone Tissue Engineering: Current Scenario and ChallengesTissue Engineering and Regenerative Medicine–141––
212017Neha R., Jaiswal A., Bellare J., Sahu N.K.Synthesis of surface grafted mesoporous magnetic nanoparticles for cancer therapyJournal of Nanoscience and Nanotechnology1533-488017851815188
222017Sinha P., Kapoor S., Kadam S.S., Sahu N.K., Jaiswal A.K.Potential therapeutic modalities in cancer gene therapyJournal of Krishna Institute of Medical Sciences University2231-426162318
232017Jaiswal A.K., Chhabra H., Narwane S., Rege N., Bellare J.R.Hemostatic Efficacy of Nanofibrous Matrix in Rat Liver Injury ModelSurgical innovation1553-35142412328
242017Moghal ETB, Venkatesh K, Sen D.The delta opioid peptide D-Alanine 2, Leucine 5 Enkephaline (DADLE)-induces neuroprotection through cross-talk between the UPR and pro-survival MAPK-NGF-Bcl2 signaling pathways via modulation of several micro-RNAs in SH-SY5Y cells subjected to ER stressCell Biology International1095-8355425543569
252017Reddy LVK, Sen DDADLE enhances viability and anti-inflammatory effect of human MSCs subjected to serum free apoptotic condition in part via the DOR/PI3K/AKT pathwayLife Sciences0024-3205191DEC195204
262017Krishnagopal A, Reddy A, Sen DStent-mediated gene and drug delivery for cardiovascular disease and cancer: A brief insightJ Gene Med1521-2254195111
272017Venkatesh K, Reddy LVK, Abbas S, Mullick M, Moghal ETB, Balakrishna JP, Sen D.NOTCH Signaling Is Essential for Maturation, Self-Renewal, and Tri-Differentiation of In Vitro Derived Human Neural Stem CellsCell Reprogram2152-4971196372383
282017Bera A, SenDPromise of adeno-associated virus as a gene therapy vector for cardiovascular diseases.Heart Fail Rev1382-4147226795823
292017Venkatesh K, Sen DMesenchymal Stem Cells as a Source of Dopaminergic Neurons: A Potential Cell Based Therapy for Parkinsons DiseaseCurr Stem Cell Res Ther1574-888X124326346
302017Adak S, Mukherjee S, Sen D.Mesenchymal Stem Cell as a Potential Therapeutic for Inflammatory Bowel Disease- Myth or Reality?Curr Stem Cell Res Ther1574-888X128644657
312017Ankita Maji, Sachin M, Dwaipayan SenInhibition of Angiogenesis as a Treatment Strategy for NeuroblastomaCurrent Cancer Therapy Reviews1573-39471314362
312017Mullick M, Venkatesh K, Sen D.d-Alanine 2, Leucine 5 Enkephaline (DADLE)-mediated DOR activation augments human hUCB-BFs viability subjected to oxidative stress via attenuation of the UPRStem cell Research1873-506122Jul2028
322017Singh A, Sen DMicroRNAs in Parkinsons diseaseExp Brain Res0014-4819235823592374
332017Mohan Varma D.S., Sujatha S.Segmental contributions to the center of mass movement in normal gaitApplied Mathematical Modelling0307-904X46 328338
2016
SL.NOPUB YEARAUTHORSPAPER TITLEJOURNAL NAMEISSN NOVOL NOISSUE NOB PAGEE PAGE
12016Sait A., Prabhav N.R., Sekharappa V., Rajan R., Nambi Raj N.A., David K.S.Biomechanical comparison of short-segment posterior fixation including the fractured level and circumferential fixation for unstable burst fractures of the lumbar spine in a calf spine modelJournal of Neurosurgery: Spine1547-5654255602609
22016Thiyagarajan R., Sinha S.N., Ravichandran R., Samuvel K., Yadav G., Sigamani A.K., Subramani V., Raj N.A.N.Respiratory gated radiotherapy-pretreatment patient specific quality assuranceJournal of Medical Physics0971-62034116570
32016Das M., Malipeddi H., Nambiraj N.A., Rajan R.Phytochemical Analysis, Antioxidant Activity and In Vitro Growth Inhibition of Struvite Crystals by Ipomoea Eriocarpa Leaf ExtractsJournal of Food Biochemistry0145-8884402148160
42016Nithya L., Arunai Nambi Raj N., Rathinamuthu S.Analyzing the characteristics of 6 MV photon beam at low monitor unit settingsJournal of Medical Physics0971-62034113437
52016Thiyagarajan R., Nambiraj A., Sinha S.N., Yadav G., Kumar A., Subramani V., KothandaramanAnalyzing the performance of ArcCHECK diode array detector for VMAT planReports of Practical Oncology and Radiotherapy1507-13672115056
62016Nithya L., Arunai Nambi Raj N., Rathinamuthu S., Pandey M.B.Analyzing the performance of the planning system by use of AAPM TG 119 test casesRadiological Physics and Technology1865-0333912229
72016Rajan R., Murali A., Sivakumar A., Raj N.A.N.A Portable Detection Kit Using Au Nanoparticles Modified Carbon Paste Electrode for Screening Uricemia PatientsIEEE Sensors Journal1530-437X162382008205
82016Sigamani A., Nambiraj A., Yadav G., Giribabu A., Srinivasan K., Gurusamy V., Raman K., Karunakaran K., Thiyagarajan R.Surface dose measurements and comparison of unflattened and flattened photon beamsJournal of Medical Physics0971-62034128591
92016Revathi A., Magesh S., Balla V.K., Das M., Manivasagam G.Current advances in enhancement of wear and corrosion resistance of titanium alloys �€“ a reviewMaterials Technology1066-78573112696704
102016Dennis C., Sethu S., Nayak S., Mohan L., Morsi Y.., Manivasagam G.Suture materials – Current and emerging trendsJournal of Biomedical Materials Research – Part A1549-3296104615441559
112016SATHISH S., GEETHA M.Comparative study on corrosion behavior of plasma sprayed Al2O3, ZrO2, Al2O3/ZrO2 and ZrO2/Al2O3 coatingsTransactions of Nonferrous Metals Society of China (English Edition)1003-632626513361344
122016Sankar M., Suwas S., Balasubramanian S., Manivasagam G.Comparison of electrochemical behavior of hydroxyapatite coated onto WE43 Mg alloy by electrophoretic and pulsed laser depositionSurface and Coatings Technology0257-8972309 840848
132016Rana D., Leena M., Nithyananth M., Pasricha R., Manivasagam G., Ramalingam M.Control of stem cell fate and function by polymer nanofibersJournal of Nanoscience and Nanotechnology1533-488016990159021
142016Vijayalakshmi U., Chellappa M., Anjaneyulu U., Manivasagam G., Sethu S.Influence of Coating Parameter and Sintering Atmosphere on the Corrosion Resistance Behavior of Electrophoretically Deposited Composite CoatingsMaterials and Manufacturing Processes1042-691431195106
152016Anura A., Conjeti S., Das R.K., Pal M., Paul R.R., Bag S., Ray A.K., Chatterjee J.Computer-aided molecular pathology interpretation in exploring prospective markers for oral submucous fibrosis progressionHead and Neck1043-3074385653669
162016Naraginti S., Kumari P.L., Das R.K., Sivakumar A., Patil S.H., Andhalkar V.V.Amelioration of excision wounds by topical application of green synthesized, formulated silver and gold nanoparticles in albino Wistar ratsMaterials Science and Engineering C0928-493162 293300
172016Chhabra H., Deshpande R., Kanitkar M., Jaiswal A., Kale V.P., Bellare J.R.A nano zinc oxide doped electrospun scaffold improves wound healing in a rodent modelRSC Advances2046-20696214281439
182016Dennis C , Sethu S , Nayak S , Mohan L , Morsi YY , Manivasagam GSuture materials – Current and emerging trendsBiomed Mater Res A.26860644104A15441559
192016Kumar MD, Dravid A, Kumar A, Sen D.Gene therapy as a potential tool for treating neuroblastoma-a focused review.Cancer Gene Ther.0929-1903235115124
202016ERFATH THANJEEM B, AND DWAIPAYAN SENEMERGING ROLE OF THE DELTA OPIOID SIGNALLING PATHWAY IN TREATING NEUROLOGICAL DISORDERS � A FOCUSED REVIEWAsian Journal of Microbiology, Biotechnology & Environmental Sciences0972-3005181263270
212016Sen D, Jayandharan GRMicroRNA-15b Modulates Molecular Mediators of Blood Induced Arthropathy in Hemophilia Mice.Int J Mol Sci.1422-0067174113
222016Singh A, Singh A, Sen DMesenchymal stem cells in cardiac regeneration: a detailed progress report of the last 6 years (2010-2015).Stem Cell Res Ther1757-651271125
232016Singh A, Sen DTherapeutic Value of Adeno Associated Virus as a Gene Therapy Vector for Parkinsons Disease – A Focused Review.Curr Gene Ther.1566-5232164278286
242016Sathishkumar Y, Krishnaraj C, Rajagopal K, Sen D, Lee YS.High throughput de novo RNA sequencing elucidates novel responses in Penicillium chrysogenum under microgravity.Bioprocess Biosyst Eng1615-7591392223231
2015
SL.NOPUB YEARAUTHORSPAPER TITLEJOURNAL NAMEISSN NOVOL NOISSUE NOB PAGEE PAGE
12015Kumarpranawa, Khan I., Saranya D., Raj A.Preparation and characterization of kidney stone phantoms with compression strength and dielectric property studiesInternational Journal of ChemTech Research0974-429085153157
22015Reshma Rajan, R Vidya, S Saranya, V Deepalakshmi, N Arunai Nambi RajInvitro development of Magnesium Ammonium Phosphate Hexahydrate crystal by single diffusion method and study of its anti-microbial activity194522924699701
32015Kaviarasu K., Raj N., Murthy K., Babu A., Prasad B.Impact of dose rate on accuracy of intensity modulated radiation therapy plan delivery using the pretreatment portal dosimetry quality assurance and setting up the workflow at hospital levelsJournal of Medical Physics0971-6203404226232
42015N Srilekha, EP Sabina, S Lalitha, P Selvam, R Vidya, N Arunai Nambi RajStudies on induction of organic crystals in Wister rat models and its interaction with Withania somniferaJOURNAL OF THE INDIAN CHEMICAL SOCIETY194522924600602
52015Reshma rajan., Himaja m., Arunai nambi raj., Mahima vedi., Badrinath sritharan., Sabina e p nIn vitro and In vivo study on the effect of Scoparia Dulcis in inhibiting the growth of urinary crystals.International Journal of Phytomedicine0975-018564617624
62015Ashokkumar S., Nambiraj A., Sinha S.N., Yadav G., Raman K., Bhushan M., Thiyagarajan R.Measurement and comparison of head scatter factor for 7MV unflattened (FFF) and 6MV flattened photon beam using indigenously designed columnar mini phantomReports of Practical Oncology and Radiotherapy1507-1367203170180
72015Rajan R., Raj N.A.N., Madeswaran S., Babu D.R.Dielectric studies on struvite urinary crystals, a gateway to the new treatment modality for urolithiasisSpectrochimica Acta – Part A: Molecular and Biomolecular Spectroscopy1386-1425148 266270
82015Yadav A., Mishra S.K., Saranya D., Raj N.A.N.Preparation and characterization of kidney stone phantom with its flexural strength studiesInternational Journal of ChemTech Research0974-429085170174
92015Pandey M., Joshi G.M., Deshmukh K., Nath Ghosh N., Nambi Raj N.A.Electrical conductivity, optical properties and mechanical stability of 3, 4, 9, 10-perylenetetracarboxylic dianhidride based organic semiconductorJournal of Physics and Chemistry of Solids0022-369780 5261
102015D saranya., Reshma rajan., V suganthan., A murugeswari., N arunai nambi rajSynthesis and characterization of pullulan acetate coated magnetic nanoparticle for hyperthermic therapyProcedia Materials science–10 29
112015Richard C., Manivasagam G., Chen Y.M.Measurement of wear and friction resistance of bulk and coated materialsMaterials Characterization: Modern Methods and Applications–  259287
122015Manivasagam G., Subramanian B., Webster T.J.Summary of the national conference on challenges in biomaterials research jointly organized by VIT and CSIR-CECRIInternational Journal of Nanomedicine1176-911410 15
132015Sathish S., Geetha M.Microstructure and Corrosion Behaviour of Plasma Sprayed Bilayered Ceramic CoatingsTransactions of the Indian Ceramic Society0371-750X74297103
142015Mohammed M.T., Khan Z.A., Geetha M., Siddiquee A.N.Microstructure, mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including agingJournal of Alloys and Compounds0925-8388634 272280
152015Ganapathy P., Manivasagam G., Rajamanickam A., Natarajan A.Wear studies on plasma�€“sprayed Al2 O3 and 8mole% of yttrium�€“stabilized ZrO2 composite coating on biomedical Ti�€“6Al�€“4V alloy for orthopedic joint applicationInternational Journal of Nanomedicine1176-911410 213222
162015Mohammed M.T., Khan Z.A., Manivasagam G., Siddiquee A.N.Influence of thermomechanical processing on biomechanical compatibility and electrochemical behavior of new near beta alloy, Ti-20.6Nb-13.6Zr-0.5VInternational Journal of Nanomedicine1176-911410 223235
172015Chellappa M., Anjaneyulu U., Manivasagam G., Vijayalakshmi U.Preparation and evaluation of the cytotoxic nature of TiO2 nanoparticles by direct contact methodInternational Journal of Nanomedicine1176-911410 3141
182015Mohsin talib mohammed., Zahid a khan., Geetha m., Arshad noor siddiqueeExploring the Effect of Thermo-mechanical Processing on Total Elongation of a Novel Biomedical Titanium AlloyInternational Journal of Materials Science and Engineering2315-452732120133
192015Mohammed M.T., Khan Z.A., Geetha M., Siddiquee A.N., Mishra P.Influence of thermo-mechanical processing on microstructure, mechanical properties and corrosion behavior of a new metastable β-titanium biomedical alloyBulletin of Materials Science0250-4707381247258
202015Saha M., Tambe P., Pal S., Kubade P., Manivasagam G., Anthony Xavior M., Umashankar V.Effect of non-ionic surfactant assisted modification of hexagonal boron nitride nanoplatelets on the mechanical and thermal properties of epoxy nanocompositesComposite Interfaces0927-6440227611627
212015Santhosh R., Geetha M., Saxena V.K., Nageswara Rao M.Effect of duplex aging on microstructure and mechanical behavior of beta titanium alloy Ti-15V-3Cr-3Al-3Sn under unidirectional and cyclic loading conditionsInternational Journal of Fatigue0142-112373 8897
222015Hariprasad T., Shivalingappa D., Nagaraj A., Manivasagam G.The use of artificial neural network for the prediction of wear loss of aluminium-magnesium alloysInternational Journal of Computer Aided Engineering and Technology1757-2657717280
232015Anusha Thampi V.V., Dhandapani P., Manivasagam G., Subramanian B.Enhancement of bioactivity of titanium carbonitride nanocomposite thin films on steels with biosynthesized hydroxyapatiteInternational Journal of Nanomedicine1176-911410 107118
242015Lee T., Mathew E., Rajaraman S., Manivasagam G., Singh A.K., Lee C.S.Tribological and corrosion behaviors of warm�€“and hot�€“rolled Ti�€“13Nb�€“13zr alloys in simulated body fluid conditionsInternational Journal of Nanomedicine1176-911410 207212
252015Mohammed M.T., Khan Z.A., Geetha M.Effect of thermo-mechanical processing on microstructure and electrochemical behavior of Ti-Nb-Zr-V new metastable β titanium biomedical alloyTransactions of Nonferrous Metals Society of China (English Edition)1003-6326253759769
262015Bag S., Pal M., Chaudhary A., Das R.K., Paul R.R., Sengupta S., Chatterjee J.Connecting cyto-nano-architectural attributes and epithelial molecular expression in oral submucous fibrosis progression to cancerJournal of Clinical Pathology0021-9746688605613
272015Varma D, Sen DRole of the unfolded protein response in the pathogenesis of Parkinsons diseaseActa Neurobiol Exp (Wars).0065-1400751126
282015Kumar YS, Unnithan AR, Sen D, Kim CS, Lee YSMicrogravity biosynthesized penicillin loaded elctrospun polyuretane-Dextran nanofibrous mats for biomedical applicationsColloids and Surfaces A: Physicochemical and Engineering Aspects0927-7757477207783
2014
SL.NOPUB YEARAUTHORSPAPER TITLEJOURNAL NAMEISSN NOVOL NOISSUE NOB PAGEE PAGE
12014Anbumani S., Nambiraj N.A., Dayalan S., Ganesh K., Anchineyan P., Bilimagga R.S.A brachytherapy plan evaluation tool for interstitial applicationsAdvances in Bioinformatics1687-80272014 ––
22014Ashokkumar S., Arunai Nambi Raj N., Sinha S.N., Yadav G., Thiyagarajan R., Raman K., Mishra M.B.Comparison of head scatter factor for 6MV and 10MV flattened (FB) and unflattened (FFF) photon beam using indigenously designed columnar mini phantomJournal of Medical Physics0971-6203393184191
32014Nithya L., Raj N.A.N., Rathinamuthu S., Sharma K., Pandey M.B.Influence of increment of gantry angle and number of arcs on esophageal volumetric modulated arc therapy planning in Monaco planning system: A planning studyJournal of Medical Physics0971-6203394231237
42014Anbumani S., Arunai Nambi Raj N., Prabhakar G.S., Anchineyan P., Bilimagga R.S., Palled S.R., Chairmadhurai A.Quantification of uncertainties in conventional plan evaluation methods in Intensity Modulated Radiation TherapyJournal of B.U.ON.1107-0625191297303
52014Rajesh R., Ravichandran Y.D., Nambi Raj N.A., Senthilkumar N.Development of a Biodegradable Composite (Hydroxyapatite-Chitosan-Coir Pith) as a Packing MaterialPolymer – Plastics Technology and Engineering0360-2559531111051110
62014Manivasagam G., Suwas S.Biodegradable Mg and Mg based alloys for biomedical implantsMaterials Science and Technology (United Kingdom)0267-0836305515520
72014Pande A., Sainis S., Rajaraman S., Manivasagam G., Nageswara Rao M.Influence of rate of heating to aging temperature on precipitation hardening in a metastable β titanium alloyAdvanced Materials Research1022-6680  445450
82014Geetha M., Sathish S., Chava K., Joshi S.V.Detonation gun sprayed Al2O3-13TiO2 coatings for biomedical applicationsSurface Engineering0267-0844304229236
92014Mathew D., Bhardwaj G., Wang Q., Sun L., Ercan B., Geetha M., Webster T.J.Decreased Staphylococcus aureus and increased osteoblast density on nanostructured electrophoretic-deposited hydroxyapatite on titanium without the use of pharmaceuticalsInternational Journal of Nanomedicine1176-91149117751781
102014Naveen M., Santhosh R., Geetha M., Nageswara Rao M.Experimental study and computer modelling of the β �� ’ α + β phase transformation in Ti15-3 alloy under isothermal conditionsJournal of Alloys and Compounds0925-8388616 607613
112014Perumal G., Geetha M., Asokamani R., Alagumurthi N.Wear studies on plasma sprayed Al2O3-40wt% 8YSZ composite ceramic coating on Ti-6Al-4V alloy used for biomedical applicationsWear0043-164831142767101113
122014Revathi A., Vijayalakshmi U., Geetha M.Comparative study of electrochemical behaviour of CP-titanium and Ti-6Al-4V with other titanium based alloys for biomedical applicationsMaterials Technology1066-785729 B49B53
132014Bhawanjali S., Revathi A., Popat K.C., Geetha M.Surface modification of Ti-13Nb-13Zr and Ti-6Al-4V using electrophoretic deposition (EPD) for enhanced cellular interactionMaterials Technology1066-785729 B54B58
142014Sampath Kumar T., Balasivanandha Prabu S., Manivasagam G.Metallurgical characteristics of TiAlN/AlCrN coating synthesized by the PVD process on a cutting insertJournal of Materials Engineering and Performance1059-949523828772884
152014Mohsin talib mohammed., Zahid a khan., Geetha m., Arshad n siddiqueeMicro-hardness and Young’s modulus of a thermo-mechanically processed biomedical titanium alloyBiomaterials and Biomechanics in Bioengineering,–13117130
162014Veerachamy S., Yarlagadda T., Manivasagam G., Yarlagadda P.K.Bacterial adherence and biofilm formation on medical implants: A reviewProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine0954-41192281010831099
172014Zivi‡ F., Grujovi‡ N., Manivasagam G., Richard C., Landoulsi J., Petrovi‡ V.The potential of magnesium alloys as bioabsorbable / biodegradable implants for biomedical applicationsTribology in Industry0354-89963616773
182014Santhosh R., Geetha M., Saxena V.K., Nageswararao M.Studies on single and duplex aging of metastable beta titanium alloy Ti-15V-3Cr-3Al-3SnJournal of Alloys and Compounds0925-8388605 222229
192014Sampath Kumar T., Balasivanandha Prabu S., Manivasagam G., Padmanabhan K.A.Comparison of TiAlN, AlCrN, and AlCrN/TiAlN coatings for cutting-tool applicationsInternational Journal of Minerals, Metallurgy and Materials1674-4799218796805
202014Anura A., Das R.K., Pal M., Paul R.R., Ray A.K., Chatterjee J.Correlated analysis of semi-quantitative immunohistochemical features of E-cadherin, VEGF and CD105 in assessing malignant potentiality of oral submucous fibrosisPathology, research and practice1618-06312101210541063
212014Deboki Naskar, Sunita Nayak, Tuli Dey & Subhas C. KunduNon-mulberry silk fibroin influence osteogenesis and osteoblast-macrophage cross talk on titanium based surfaceSCIENTIFIC REPORTS20452324047454754
222014Nayak S  Kundu SC.Sericin-carboxymethyl cellulose porous matrices as cellular wound dressing materialJ Biomed Mater Res A.23853114102619281940
232014Sunita Nayak , Sanchareeka Dey , Subhas C. KunduSilk sericin–alginate–chitosan microcapsules: Hepatocytes encapsulation for enhanced cellular functionsInternational Journal of Biological Macromolecules1418130650258266
242014Sen DImproving clinical efficacy of adeno associated vectors by rational capsid bioengineeringJ Biomed Sci.1423-012721Nov19
252014Sen D, Balakrishnan B, Jayandharan GR.Cellular unfolded protein response against viruses used in gene therapy.Front Microbiol.1664-302X5Nov116

VIT @ Connect

Other Links

VISITORS

Committees @ VIT
warning

Don't Trust Fake Website/ Page / Channels

BEWARE OF ILLEGAL/FAKE WEBSITES

Beware of the illegal/fake websites misusing the name of VIT. Please visit only www.vit.ac.in or https://viteee.vit.ac.in for admissions.

B.Tech. Admission to all the four campuses of VIT are open. Admission is based on VITEEE Exam and Qualification in +2 / Pre-University marks . Admission is only through counselling. Eligible candidates may select specific campus and programme during counselling.

Follow Us:

Facebook Instagram Twitter Youtube Linkedin

Last Updated : May 2025

Copyrights © Vellore Institute Of Technology | Privacy Policy

  • Announcements

VITEEE 2025

VITREE-2025 (July Session)- Results (Vellore | Chennai | VIT-AP | VIT-Bhopal)
M.Tech.-2025 Seat Allotment Results
MCA-2025 Seat Allotment Results
VITMEE / VITREE and VITLEE (For 24-04-2025 Exam) E-admit card | Instructions to VITREE-VITMEE-Candidates

Beware of VITEEE fake websites

We came to know that some fake websites are misusing our VITEEE name. Kindly be aware of fraud websites. Please visit only https://vit.ac.in for admissions.